Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment

The effect of a deep cryogenic treatment on the microstructure of a super-bainitic steel was investigated. It was shown that quenching the super-bainitc steel in -196°C liquid nitrogen resulted in the transformation of retained austenite to two phases: ~20 nm thick martensite films and some nano carbides with a ~25 nm diameter. Some refinement of the retained austenite occurred, due to formation of fine martensite laths within the retained austenite. The evolution of these new phases resulted in an increase in the average hardness of the super-bainitic steel from 641 to ~670 HV1. © 2014 ISIJ.

Multi-phase microstructure design of a novel high strength TRIP steel through experimental methodology

The multi-phase structure of a novel low-alloy transformation induced plasticity (TRIP) steel was designed through experimental analysis. The evolutions of both microstructure and mechanical properties during the two-stage heat treatment were analyzed. The phase transformations during the intercritical annealing and the isothermal bainitic transformation were investigated by means of dilatometry. It was shown that two types of C diffusion were detected during intercritical annealing and a complex microstructure was formed after heat treatment. The processing parameters were selected in such a way to obtain microstructures with systematically different volume fractions of ferrite, bainite and retained austenite. The volume fractions of ferrite and retained austenite were found to be two main factors controlling the ductility. Furthermore, a high volume fraction of C-rich retained austenite, which was stabilized at room temperature, was the origin of a TRIP effect. The resulting material demonstrates a significant improvement in the ultimate tensile strength (1077. MPa) with good uniform elongation (22.5%), as compared to conventional TRIP steels. © 2014 Elsevier B.V.

Mid- to late Holocene landscape change and anthropogenic transformations on Mo‘orea, Society Islands: a multi-proxy approach

Archaeology’s ability to generate long-term datasets of natural and human landscape change positions the discipline as an inter-disciplinary bridge between the social and natural sciences. Using a multi-proxy approach combining archaeological data with palaeoenvironmental indicators embedded in coastal sediments, we outline millennial timescales of lowland landscape evolution in the Society Islands. Geomorphic and cultural histories for four coastal zones on Mo‘orea are reconstructed based on stratigraphic records, sedimentology, pollen analysis, and radiocarbon determinations from mid- to late Holocene contexts. Prehuman records of the island’s flora and fauna are described utilizing landsnail, insect, and botanical data, providing a palaeo-backdrop for later anthropogenic change. Several environmental processes, including sea level change, island subsidence, and anthropogenic alterations, leading to changes in sedimentary budget have operated on Mo‘orea coastlines from c. 4600 to 200 BP. We document significant transformation of littoral and lowland zones which obscured earlier human activities and created significant changes in vegetation and other biota. Beginning as early as 440 BP (1416–1490 cal. ad), a major phase of sedimentary deposition commenced which can only be attributed to anthropogenic effects. At several sites, between 1.8 and 3.0 m of terrigenous sediments accumulated within a span of two to three centuries due to active slope erosion and deposition on the coastal flats. This phase correlates with the period of major inland expansion of Polynesian occupation and intensive agriculture on the island, indicated by the presence of charcoal throughout the sediments, including wood charcoal from several economically important tree species.

A comparative assessment of the hardness of nano-structured bainitic steel affected by using various quenchants

Quenching, in heat treatment, plays a vital role in controlling material properties. It is the most important step in manipulating the strength of steel. It involves cooling the material from the austenitizing temperature at different cooling rates using variations in quenchants to obtain corresponding material properties. The commonly used quenchants are water, oil, and brine. The cooling rate is the rate at which heat is ejected from the material by the quenchant. The effectiveness of the quenchant is judged by its ability to absorb heat from the material and thermally conduct. Because of stringent regulations regarding use and disposal, there is a need to develop new, environmentally friendly quenchants. The experimental design in this study consisted of quenching austenitized nano-structured bainitic steel in four different quenchants, namely, water, oil, brine, and 1 M sodium carbonate solution. This research gives the insight of substituting conventional quenchants with 1 M sodium carbonate solution. The final four samples were characterized using metallography. A comparative study of the hardness of nano-structured bainitic steel quenched in the newly developed quenchant (i.e., 1 M sodium carbonate solution) and of steel quenched with the conventional one is done. All the results are tabulated, and the applicability of the quenchants is discussed.

Specifying model transformations by direct manipulation using concrete visual notations and interactive recommendations

Model transformations are a crucial part of Model-Driven Engineering (MDE) technologies but are usually hard to specify and maintain for many engineers. Most current approaches use meta-model-driven transformation specification via textual scripting languages. These are often hard to specify, understand and maintain. We present a novel approach that instead allows domain experts to discover and specify transformation correspondences using concrete visualizations of example source and target models. From these example model correspondences, complex model transformation implementations are automatically generated. We also introduce a recommender system that helps domain experts and novice users find possible correspondences between large source and target model visualization elements. Correspondences are then specified by directly interacting with suggested recommendations or drag and drop of visual notational elements of source and target visualizations. We have implemented this approach in our prototype tool-set, CONVErT, and applied it to a variety of model transformation examples. Our evaluation of this approach includes a detailed user study of our tool and a quantitative analysis of the recommender system.

Solvate ionic liquids as reaction media for electrocyclic transformations

Solvate ionic liquids (SILs) consisting of lithium bis(trifluoromethylsulfonyl)imide dissolved in tri-or tetraglyme have recently emerged as a novel class of ionic liquids. Herein, the first use of solvate ionic liquids as a replacement for molecular solvents in electrocyclization reactions is reported. The SILs promoted both Diels-Alder and [2+2] cycloaddition reactions, compared to an appropriate molecular solvent, and 5 M lithium perchlorate in diethyl ether. The Gutmann acceptor number (AN) of these solvate ionic liquids has also been determined by 31P NMR spectroscopy to be 26.5, thus being modest Lewis acids.

Method for computing state transformations of time-delay systems

This study provides a systematic method for deriving state transformations of a class of time-delay systems with multiple output. The significance of this study is that such state transformations can be used to transform timedelay systems into new coordinates where all the time-delay terms in the system description are associated with the output and input only. Therefore, in the new coordinate system, a Luenberger-type state observer can be readily designed. Subsequently, of the three possible versions of the original state vector, namely, instantaneous, delayed, and a mixed of instantaneous and delayed, a state observer which estimates one of these versions can be obtained. This new finding allows the authors to design state observers for a wider class of time-delay systems. Conditions for the existence of such coordinate changes and an effective algorithm for computing them are provided in this study. A numerical example and simulation results are given to illustrate the simplicity and effectiveness of the proposed method.

Transformations of teaching and learning through digital technologies

This chapter is a critical synthesis of research related to the transformations that take place when digital technologies are incorporated into teaching and learning practices. In developing this synthesis, research from all levels of education was reviewed with a focus on the opportunities digital technologies offer for cognitive, pedagogical, affective and professional change. The chapter is structured in alignment with Pierce and Stacey’s (Pierce and Stacey, Int J Comput Math Learn 15(1):1–20 2010) map of pedagogical opportunities in which three dimensions for educational transformation were identified: tasks, classroom, and subject. A discussion of future directions for research into technology enhanced mathematics education concludes the review.

Hydrogen permeation in nanostructured bainitic steel

Hydrogen permeation of nanostructured bainitic steel, produced at two different transformation temperatures, i.e., 473.15 K (200 °C) BS-200 and 623.15 K (350 °C) BS-350, was determined using Devanathan–Stachurski hydrogen permeation cell and compared with that of mild steel. Nanostructured bainitic steel showed lower effective diffusivity of hydrogen as compared to the mild steel. The BS-200 steel, which exhibited higher volume fraction of bainitic ferrite phase, showed lower effective diffusivity than BS-350 steel. The finer microstructural constituents (bainitic ferrite laths and retained austenite films) and higher dislocation density in the bainitic ferrite phase of BS-200 steel can be attributed to its lower effective diffusivity as compared to BS-350 steel and mild steel.

The impact of retained austenite characteristics on the two-body abrasive wear behavior of ultrahigh strength bainitic steels

In the current study, a high-carbon, high-alloy steel (0.79 pct C, 1.5 pct Si, 1.98 pct Mn, 0.98 pct Cr, 0.24 pct Mo, 1.06 pct Al, and 1.58 pct Co in wt pct) was subjected to an isothermal bainitic transformation at a temperature range of 473 K to 623 K (200 °C to 350 °C), resulting in different fully bainitic microstructures consisting of bainitic ferrite and retained austenite. With a decrease in the transformation temperature, the microstructure was significantly refined from ~300 nm at 623 K (350 °C) to less than 60 nm at 473 K (200 °C), forming nanostructured bainitic microstructure. In addition, the morphology of retained austenite was progressively altered from film + blocky to an exclusive film morphology with a decrease in the temperature. This resulted in an enhanced wear resistance in nanobainitic microstructures formed at low transformation temperature, e.g., 473 K (200 °C). Meanwhile, it gradually deteriorated with an increase in the phase transformation temperature. This was mostly attributed to the retained austenite characteristics (i.e., thin film vs blocky), which significantly altered their mechanical stability. The presence of blocky retained austenite at high transformation temperature, e.g., 623 K (350 °C) resulted in an early onset of TRIPing phenomenon during abrasion. This led to the formation of coarse martensite with irregular morphology, which is more vulnerable to crack initiation and propagation than that of martensite formed from the thin film austenite, e.g., 473 K (200 °C). This resulted in a pronounced material loss for the fully bainitic microstructures transformed at high temperature, e.g., 623 K (350 °C), leading to distinct sub-surface layer and friction coefficient curve characteristics. A comparison of the abrasive behavior of the fully bainitic microstructure formed at 623 K (350 °C) and fully pearlitic microstructure demonstrated a detrimental effect of blocky retained austenite with low mechanical stability on the two-body abrasion.

Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT

In situ neutron diffraction, transmission electron microscopy (TEM) and atom probe tomography (APT) have been used to study the early stages of bainite transformation in a 2 mass% Si nano-bainitic steel. It was observed that carbon redistribution between the bainitic ferrite and retained austenite at the early stages of the bainite transformation at low isothermal holding occurred in the following sequence: (i) formation of bainitic ferrite nuclei within carbon-depleted regions immediately after the beginning of isothermal treatment; (ii) carbon partitioning immediately after the formation of bainitic ferrite nuclei but substantial carbon diffusion only after 33 min of bainite isothermal holding; (iii) formation of the carbon-enriched remaining austenite in the vicinity of bainitic laths at the beginning of the transformation; (iv) segregation of carbon to the dislocations near the austenite/ferrite interface; and (v) homogeneous redistribution of carbon within the remaining austenite with the progress of the transformation and with the formation of bainitic ferrite colonies. Bainitic ferrite nucleated at internal defects or bainite/austenite interfaces as well as at the prior austenite grain boundary. Bainitic ferrite has been observed in the form of an individual layer, a colony of layers and a layer with sideplates at the early stages of transformation.