N-methyl-N-alkylpyrrolidinium bis(perfluoroethylsulfonyl)amide ([NPf2]–) and tris(trifluoromethanesulfonyl)methide ([CTf3]–) salts : synthesis and characterization

Novel salts based the pyrrolidinium cation [C_nmpyr]⁺ (where n denote the number of carbons in the straight alkyl chain) and either the [NPf₂]^– or [CTf₃]^– anions have been synthesized and characterized to determine their thermal behaviour, stability, and conductivity. [C₁mpyr][NPf₂], [C₂mpyr][NPf₂], and [C₁mpyr][CTf₃] exhibit behaviour indicative of a plastic crystal phase. Both [C₃mpyr][NPf₂] and [C₄mpyr][NPf₂] are RTILs, while all of the [CTf₃]^– salts, have melting points above 60°C. [C₃mpyr][NPf₂] exhibited the widest electrochemical window of 5.5 V. The [NPf2]– salt exhibited similar reductive limits to the [NTf₂]^– anion, –3.2 V versus Fc⁺|Fc, while [CTf₃]^– had lower reductive stability. The [CTf₃]^– salts were more stable towards oxidation, +2.5 V versus Fc⁺|Fc, compared to the [NPf₂]^– and [NTf₂]^– salts.

Aluminium speciation in 1-Butyl-1-Methylpyrrolidinium Bis(trifluoromethylsulfonyl)amide/AlCl3 mixtures

Aluminium speciation: Aluminium speciation in NTf₂ ionic liquids has a strong influence on its electrodeposition from the liquid mixture. This work probed the nature of these species and proposes that the electroactive species involved are either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻ (e.g., see figure).


Electrodeposition of aluminium is possible from solutions of AlCl₃ dissolved in the 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (C₄mpyrNTf₂) ionic liquid. However, electrodeposition is dependant on the AlCl₃ concentration as it only occurs at concentrations >1.6 mol L⁻¹. At these relatively high AlCl₃ concentrations the C₄mpyrNTf₂/AlCl₃ mixtures exhibit biphasic behaviour. Notably, at 1.6 mol L⁻¹ AlCl₃, aluminium can only be electrodeposited from the upper phase. Conversely, we found that at 3.3 mol L⁻¹ aluminium electrodeposition can only occur from the lower phase. The complex chemistry of the C₄mpyrNTf₂/AlCl₃ system is described and implications of aluminium speciation in several C₄mpyrNTf₂/AlCl₃ mixtures, as deduced from Raman and ²⁷Al NMR spectroscopic data, are discussed. The ²⁷Al NMR spectra of the C₄mpyrNTf₂/AlCl₃ mixtures revealed the presence of both tetrahedrally and octahedrally coordinated aluminium species. Raman spectroscopy revealed that the level of uncoordinated NTf₂⁻ anions decreased with increasing AlCl₃ concentration. Quantum chemical calculations using density functional and ab initio theory were employed to identify plausible aluminium-containing species and to calculate their vibrational frequencies, which in turn assisted the assignment of the observed Raman bands. The data indicate that the electroactive species involved are likely to be either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻.

Study on the role of stearic acid and ethylene-bis-stearamide on the mechanical alloying of a biomedical titanium based alloy

The present study examines the influence of different contents and types of process control agent (PCA), i.e., stearic acid (SA) and ethylene-bis-stearamide (EBS), on the microstructural evolution and characteristics of Ti-16Sn-4Nb (wt pct) alloy powders and bulk samples. The characterization of the powders and bulk samples was carried out by using chemical analysis, optical microscopy, scanning electron microscopy (SEM) combined with energy-dispersive spectrometry (EDS), and X-ray diffractometry. Results indicated that the powder recovered from the ball milling containers increased with increasing amounts of SA and EBS. Furthermore, adding more SA or EBS to the powder mixture resulted in a considerably smaller particle size, with a flaky-shaped morphology for the given ball milling time. Also, a slightly higher effectiveness was found for EBS when compared to SA. Meanwhile, the addition of both SA and EBS led to a delay in the alloy formation during mechanical alloying (MA) and caused contamination of the material with mainly carbon (C) and oxygen (O). An optimum amount of 1 wt pct PCA led to a good balance between cold welding and fracturing, and thus favored the formation of the titanium alloy. The microstructural observation of the bulk alloy showed a homogeneous distribution of fine Nb-rich ß-phase colonies within the α-Ti matrix with the addition of PCA less than 1 wt pct.

Synthesis, x-ray structure of ferrocene bearing Bis(Zn-cyclen) complexes and the selective electrochemical sensing of TpT

The new ligand, [Fc(cyclen)₂] (5) (Fc=ferrocene, cyclen=1,4,7,10-tetraazacyclododecane), and corresponding Zn^II complex receptor, [Fc{Zn(cyclen)(CH₃OH)}₂](ClO₄)₄ (1), consisting of a ferrocene moiety bearing one Zn^II-cyclen complex on each cyclopentadienyl ring, have been designed and prepared through a multi-step synthesis. Significant shifts in the ¹H NMR signals of the ferrocenyl group, cf. ferrocene and a previously reported [Fc{Zn(cyclen)}]²⁺ derivative, indicated that the two Zn^II-cyclen units in 1 significantly affect the electronic properties of the cyclopentadienyl rings. The X-ray crystal structure shows that the two positively charged Zn^II-cyclen complexes are arranged in a trans like configuration, with respect to the ferrocene bridging unit, presumably to minimise electrostatic repulsion. Both 5 and 1 can be oxidized in 1:4 CH₂Cl₂/CH₃CN and Tris-HCl aqueous buffer solution under conditions of cyclic voltammetry to give a well defined ferrocene-centred (Fc⁰/+) process. Importantly, 1 is a highly selective electrochemical sensor of thymidilyl(3′-5′)thymidine (TpT) relative to other nucleobases and nucleotides in Tris-HCl buffer solution (pH 7.4). The electrochemical selectivity, detected as a shift in reversible potential of the Fc⁰/+ component, is postulated to result from a change in the configuration of bis(Zn^II-cyclen) units from a trans to a cis state. This is caused by the strong 1:1 binding of the two deprotonated thymine groups in TpT to different Zn^II centres of receptor 1. UV-visible spectrophotometric titrations confirmed the 1:1 stoichiometry for the 1:TpT adduct and allowed the determination of the apparent formation constant of 0.89±0.10×10⁶ M⁻¹ at pH 7.4.

Ionic liquid electrolyte for lithium metal batteries : physical, electrochemical, and interfacial studies of N-Methyl-N-butylmorpholinium Bis(fluorosulfonyl)imide

The ionic liquid (IL) N-methyl-N-butylmorpholinium bis(fluorosulfonyl)imide (C₄mmor FSI) is examined from physical and electrochemical perspectives. Pulsed field gradient NMR spectroscopy shows that ion diffusivities are low compared with similar, non-ethereal ILs. Ionicity values indicate that above room temperature, less than 50% of ions contribute to conductivity.

Lithium cycling in symmetrical cells using a C₄mmor FSI-based electrolyte is best demonstrated at elevated temperatures. Specific capacities of 130 mAh g⁻¹ are achieved in a Li−LiFePO₄ battery at 85 °C. FT-IR spectroscopic investigations of lithium electrodes suggest the presence of alkoxide species in the solid electrolyte interphase (SEI), implying a ring-opening reaction of C₄mmor with lithium metal. In contrast, the SEI derived from N-methyl-N-propylpiperidinium FSI lacks the alkoxide signature but shows signs of alkyl unsaturation, and the activation energy for Li+ transport through this SEI is slightly lower than that for the C₄mmor-derived SEI. Our detailed findings give insight into the capabilities and limitations of rechargeable lithium metal batteries utilizing a C₄mmor FSI electrolyte.

Green chemiluminescence from a bis-cyclometalated iridium(III) complex with an ancillary bathophenanthroline disulfonate ligand

The reaction of a fluorinated iridium complex with cerium(IV) and organic reducing agents generates an intense emission with a significant hypsochromic shift compared to contemporary chemically-initiated luminescence from metal complexes.

Electrochemistry at negative potentials in Bis(trifluoromethanesulfonyl)amide ionic liquids

The bis(trifluoromethanesulfonyl)amide (TFSA) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Here we present electrochemical and spectroscopic evidence indicating that reductive decomposition of the bis(trifluoromethanesulfonyl)amide (TFSA) anion begins at ~ −2.0 V vs. Fc+/Fc, well before the reported cathodic limit for many of these ILs. These processes are shown to be dependent upon the electrode substrate and are influenced by the water content of the IL. Supporting ab initio calculations are presented which suggest a possible mechanism for the anion decomposition. The products appear to passivate the electrode surface and the implications of this behaviour are discussed.

An optimised synthesis of 2-[2,3-Bis(tert-butoxycarbonyl)guanidino]ethylamine

This short report describes an improved, reliable, and high-yielding (>90%) synthesis of 2-[2,3-bis(tert-butoxycarbonyl)guanidino]ethylamine. The method is scalable (>5 g), and the product obtained directly from the reaction mixture requires no further purification. In addition, this methodology can be successfully applied to other diamine substrates (1,3-propyl and 1,4-butyl; 70% and 61% yield, respectively).

Examples of regioselective anion recognition among a family of two-, three-, and four-"armed" bis-, tris-, and tetrakis(thioureido) [n]polynorbornane hosts

A family of conformationally preorganized, [n]polynorbornane-based anion hosts 1a,b–6a,b have been synthesized. The series includes receptors with 4, 8, and 12 H-bond donors. Using ¹H NMR titration techniques, evaluation of the new hosts against a series of alkyl and aryl dicarboxylates as well as a range of phosphoanionic species has revealed that the tris(thioureido) hosts (in particular 3a) are capable of regioselectively binding dicarboxylates and pyrophosphate (H₂PPi^2–).

Conversion coatings of Mg-alloy AZ91D using trihexyl(tetradecyl) phosphonium bis(trifluoromethanesulfonyl)amide ionic liquid

This work reveals the performance of a trihexyl(tetradecyl)phosphonium bis(trifluoromethanesulfonyl)amide ([P6,6,6,14][NTf2]) ionic liquid (IL) conversion coating upon AZ91D. Such conversion coatings represent a novel avenue for chromate replacement. An optimization of coating performance was pursued by careful alloy pretreatment to generate a surface on which the coating performs best, as the AZ91 substrate is distinctly different from pure or dilute Mg alloys. The results reveal that a functional conversion coating can be achieved, retarding anodic dissolution kinetics, causing a significant decrease in corrosion rate. The coating efficacy is closely tied to the pretreatment performed, which dictates both the microstructural and electrochemical heterogeneity of the surface. The resulting coatings were found to contain MgxFx and phosphonium cation related components, the proportions of which were dependent on the pretreatment.

Bis-thiourea macrocycles incorporating fused [n]polynorbornanes: binding of flexible versus rigid dicarboxylates

Two macrocyclic bis-thiourea hosts 5 and 6 were constructed and their interactions with two dicarboxylates of similar size (pimelate = flexible and terephthalate = rigid) were evaluated using 1H NMR titration techniques. In contrast to previous work with thiourea functionalised [n]polynorbornanes (where a notable increase in H:G affinity was noted for the rigid guest), the new macrocyclic hosts, in particular host 6, bind pimelate more strongly than terephthalate (for 6 binding pimelate log Ka = 4.7, terephthalate log Ka = 3.7). A binding arrangement in which the flexible dicarboxylate is ‘perched’ above the macrocycle is proposed to justify these results.