Chemical and thermal stability of surface‐modified porous polyethylene membranes

In this paper, we describe the surface modification of porous polyethylene by the adsorption of polyelectrolyte mutilayers on plasma‐activated polyethylene surfaces. We use the migration rates of deionized water as an effective alternative to contact angle measurements in order to probe the interfacial energy of the modified surface. The newly acquired surface properties that result from the surface modification are monitored with respect to several key chemical and environmental variables. These variables were chosen so that they will reflect some of the common handling procedures in a laboratory or health care environments, such as exposure to solvents of different pH and polarities, and fluctuations of ambient temperature over an extended period, i.e., “shelf‐life” duration. The stability of these surface properties of the modified membranes is a fundamental requirement for their potential use in a variety of applications involving lateral flow and binding media for bio‐assays. In this paper, we show that a membrane modified by a polyelectrolyte monolayer is more stable than a membrane that has undergone plasma activation alone, while a membrane modified by a polyelectrolyte bilayer exhibits retention of the enhanced surface hydrophilic properties under various conditions and over a long period of time.

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : mechanical properties and deformation textures

IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter diffraction (EBSD) analysis. Texture was also successfully measured by EBSD using large surface areas. Finite element (FE) simulations were carried out for multiple passes to obtain the strain distribution after rolling. From the FE results, the velocity gradient along selected flow lines was extracted and the evolution of the texture was simulated using polycrystal plasticity modeling. The best mechanical properties were obtained after ASR using a roll diameter ratio of 2. The textures appeared to be tilted up to 12 deg around the transverse direction, which were simulated with the FE-combined polycrystal plasticity modeling in good agreement with measurements. The simulation work revealed that the shear component introduced by ASR was about the same magnitude as the normal component of the rolling strain tensor.

Context-dependent correlation between resting metabolic rate and daily energy expenditure in wild chipmunks

Several empirical studies have shown that variation in daily energy expenditure (DEE) and resting metabolic rate (RMR) is influenced by environmental and individual factors, but whether these shared influences are responsible for, or independent of, relationships between DEE and RMR remains unknown. The objectives of this study were to (i) simultaneously evaluate the effects of environmental and individual variables on DEE and RMR in free-ranging eastern chipmunks (Tamias striatus) and (ii) quantify the correlation between DEE and RMR before and after controlling for common sources of variation. We found that the influence of individual factors on DEE and RMR is most often shared, whereas the influence of environmental factors tends to be distinct. Both raw and mass-adjusted DEE and RMR were significantly correlated, but this correlation vanished after accounting for the shared effect of reproduction on both traits. However, within reproductive individuals, DEE and RMR remained positively correlated after accounting for all other significant covariates. The ratio of DEE to RMR was significantly higher during reproduction than at other times of the year and was negatively correlated with ambient temperature. DEE and RMR appear to be inherently correlated during reproduction, but this correlation does not persist during other, less energy-demanding periods of the annual cycle.

Heat for nothing or activity for free? Evidence and implications of activity-thermoregulatory heat substitution

If heat generated through activity can substitute for heat required for thermoregulation, then activity in cold environments may be energetically free for endotherms. Although the possibility of activity-thermoregulatory heat substitution has been long recognized, its empirical generality and ecological implications remain unclear. We combine a review of the literature and a model of heat exchange to explore the generality of activity-thermoregulatory heat substitution, to assess the extent to which substitution is likely to vary with body size and ambient temperature, and to examine some potential macroecological implications. A majority of the 51 studies we located showed evidence of activity-thermoregulatory heat substitution (35 of 51 studies), with 28 of 32 species examined characterized by substitution in one or more study. Among studies that did detect substitution, the average magnitude of substitution was 57%, but its occurrence and extent varied taxonomically, allometrically, and with ambient temperature. Modeling of heat production and dissipation suggests that large birds and mammals, engaged in intense activity and exposed to relatively warm conditions, have more scope for substitution than do smaller endotherms engaged in less intense activity and experiencing cooler conditions. However, ambient temperature has to be less than the lower critical temperature (the lower bound of the thermal neutral zone) for activity-thermoregulatory heat substitution to occur and this threshold is lower in large endotherms than in small endotherms. Thus, in nature, substitution is most likely to be observed in intermediate-sized birds and mammals experiencing intermediate ambient temperatures. Activity-thermoregulatory heat substitution may be an important determinant of the activity patterns and metabolic ecology of endotherms. For example, a pattern of widely varying field metabolic rates (FMR) at low latitudes that converges to higher and less variable FMR at high latitudes has been interpreted as suggesting that warm environments at low latitudes allow a greater variety of feasible metabolic niches than do cool, high-latitude environments. However, activity-thermoregulatory heat substitution will generate this pattern of latitudinal FMR variation even if endotherms from cold and warm climates are metabolically and behaviorally identical, because the metabolic rates of resting and active animals are more similar in cold than in warm environments. Activity-thermoregulatory heat substitution is an understudied aspect of endotherm thermal biology that is apt to be a major influence on the physiological, behavioral and ecological responses of free-ranging endotherms to variation in temperature.

Illumination-invariant face recognition from a single image across extreme pose using a dual dimension AAM ensemble in the thermal infrared spectrum

Over the course of the last decade, infrared (IR) and particularly thermal IR imaging based face recognition has emerged as a promising complement to conventional, visible spectrum based approaches which continue to struggle when applied in practice. While inherently insensitive to visible spectrum illumination changes, IR data introduces specific challenges of its own, most notably sensitivity to factors which affect facial heat emission patterns, e.g. emotional state, ambient temperature, and alcohol intake. In addition, facial expression and pose changes are more difficult to correct in IR images because they are less rich in high frequency detail which is an important cue for fitting any deformable model. In this paper we describe a novel method which addresses these major challenges. Specifically, when comparing two thermal IR images of faces, we mutually normalize their poses and facial expressions by using an active appearance model (AAM) to generate synthetic images of the two faces with a neutral facial expression and in the same view (the average of the two input views). This is achieved by piecewise affine warping which follows AAM fitting. A major contribution of our work is the use of an AAM ensemble in which each AAM is specialized to a particular range of poses and a particular region of the thermal IR face space. Combined with the contributions from our previous work which addressed the problem of reliable AAM fitting in the thermal IR spectrum, and the development of a person-specific representation robust to transient changes in the pattern of facial temperature emissions, the proposed ensemble framework accurately matches faces across the full range of yaw from frontal to profile, even in the presence of scale variation (e.g. due to the varying distance of a subject from the camera). The effectiveness of the proposed approach is demonstrated on the largest public database of thermal IR images of faces and a newly acquired data set of thermal IR motion videos. Our approach achieved perfect recognition performance on both data sets, significantly outperforming the current state of the art methods even when they are trained with multiple images spanning a range of head views.

Vesselness features and the inverse compositional AAM for robust face recognition using thermal IR

Over the course of the last decade, infrared (IR) and particularly thermal IR imaging based face recognition has emerged as a promising complement to conventional, visible spectrum based approaches which continue to struggle when applied in the real world. While inherently insensitive to visible spectrum illumination changes, IR images introduce specific challenges of their own, most notably sensitivity to factors which affect facial heat emission patterns, e.g. emotional state, ambient temperature, and alcohol intake. In addition, facial expression and pose changes are more difficult to correct in IR images because they are less rich in high frequency detail which is an important cue for fitting any deformable model. In this paper we describe a novel method which addresses these major challenges. Specifically, to normalize for pose and facial expression changes we generate a synthetic frontal image of a face in a canonical, neutral facial expression from an image of the face in an arbitrary pose and facial expression. This is achieved by piecewise affine warping which follows active appearance model (AAM) fitting. This is the first publication which explores the use of an AAM on thermal IR images; we propose a pre-processing step which enhances detail in thermal images, making AAM convergence faster and more accurate. To overcome the problem of thermal IR image sensitivity to the exact pattern of facial temperature emissions we describe a representation based on reliable anatomical features. In contrast to previous approaches, our representation is not binary; rather, our method accounts for the reliability of the extracted features. This makes the proposed representation much more robust both to pose and scale changes. The effectiveness of the proposed approach is demonstrated on the largest public database of thermal IR images of faces on which it achieved 100% identification rate, significantly outperforming previously described methods

Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling

In this work, a series of aging treatments has been conducted on AA6111 alloy samples for various times at ambient temperature (so-called natural aging) and at temperatures between 60 and 180 °C (artificially aged). The time at artificial ageing was chosen such that samples with approximately the same yield stress were produced. The microstructures of these alloy samples have been carefully characterized using atom probe tomography together with advanced cluster-finding techniques in order to obtain quantitative information about the changes in distribution of both the solute clusters and early-stage precipitates that are formed. The size distribution of clusters has been mapped onto the glide plane and then the stress necessary for a dislocation to pass through the range of obstacles has been estimated using an areal glide model where the dislocation–obstacle interaction strength has been assumed to be related to the obstacle size on the glide plane. It is demonstrated that the contribution of cluster strengthening during artificial aging at higher temperatures is dominated by the high number density of small clusters (Guinier radius <1 nm), whereas the situation during room temperature natural aging is more complex.

Acceleration data reveal the energy management strategy of a marine ectotherm during reproduction

1. Maintaining a high and stable body temperature is often critical for female ectotherms during reproduction. Yet this strategy may be energetically costly, and therefore challenging, during this period of already high-energy demand. 2. Here, the 6-week deployment of tri-axial accelerometers (n = 6) on a marine ectotherm, the loggerhead turtle (Caretta caretta), reproducing at the northern limit of the species’ breeding range (i.e. in a thermally dynamic environment) revealed the behavioural mechanisms underlying its energy management strategy during the breeding season. 3. The estimated activity levels of female loggerheads using overall dynamic body acceleration (ODBA) were high during the breeding season, suggesting that marine turtles may not be able to remain inactive for long periods in the same manner as terrestrial ectotherms, because of the thermally dynamic nature of their environment. 4. However, activity levels were not constant throughout the season, being impacted by both ambient water temperature and female reproductive status. In cold water at the beginning of the nesting season, high levels of activity suggested that females behaviourally thermoregulated by seeking out warm water patches along the shoreline. Interactions with male turtles (courtship and/or avoidance) may also explain this high level of activity. As sea temperatures warmed up and the amount of energy devoted to reproduction probably increased, the turtles spent more time resting during long sequential flat-bottomed dives, and reduced any unnecessary locomotory activity. 5. Turtles may therefore adjust their activity patterns in response to seasonal variations in abiotic (i.e. ambient temperature) and biotic (i.e. reproductive status) factors. This may help minimize activity-linked metabolic rate and maximize reproductive output over a season while breeding in thermally dynamic environments. 6. A mechanistic model gave support to these empirical results. The model revealed that actively maintaining high and stable body temperature is of clear benefit to female turtles at temperate breeding sites. While energetically costly, such active thermoregulatory behaviour may speed up egg maturation, allowing turtles to initiate nesting earlier in the season, and hence maximize reproductive output.

The reactivity of N-heterocyclic carbenes and their precursors with [Ru3(CO)12]

The ambient temperature reaction of the N-heterocyclic carbenes (NHCs) 1,3-dimesitylimidazol-2-ylidene (IMes) and 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IDipp) with the triruthenium cluster [Ru3(CO)12], in a 3 : 1 stoichiometric ratio, results in homolytic cleavage of the cluster to quantitatively afford the complexes [Ru(CO)4(NHC)] (1; NHC = IMes, 2; NHC = IDipp). Reaction of the 2-thione or hydrochloride precursors to IMes, i.e. S[double bond, length as m-dash]IMes and IMes·HCl, with the same triruthenium cluster affords the complexes [Ru4(μ4-S)2(CO)9(IMes)2] (3) and [Ru4(μ4-S)(CO)10(IMes)2] (4) (3 : 1 and 2 : 1 reaction), and [{Ru(μ-Cl)(CO)2(IMes)}2] (7) (3 : 1 reaction) respectively. By contrast, the complex [Ru3(μ3-S)2(CO)7(IMeMe)2] (6), where IMeMe is 1,3,4,5-tetramethylimidazol-2-ylidene, is the sole product of the 2 : 1 stoichiometric reaction of S[double bond, length as m-dash]IMeMe with [Ru3(CO)12]. Compounds 1–4, 6 and 7 have been structurally characterised by single crystal X-ray diffraction.

Individual variation in thermal performance curves: swimming burst speed and jumping endurance in wild-caught tropical clawed frogs

The importance of studying individual variation in locomotor performance has long been recognized as it may determine the ability of an organism to escape from predators, catch prey or disperse. In ectotherms, locomotor performance is highly influenced by ambient temperature (Ta), yet several studies have showed that individual differences are usually retained across a Ta gradient. Less is known, however, about individual differences in thermal sensitivity of performance, despite the fact that it could represent adaptive sources of phenotypic variation and/or additional substrate for selection to act upon. We quantified swimming and jumping performance in 18 wild-caught tropical clawed frogs (Xenopus tropicalis) across a Ta gradient. Maximum swimming velocity and acceleration were not repeatable and individuals did not differ in how their swimming performance varied across Ta. By contrast, time and distance jumped until exhaustion were repeatable across the Ta gradient, indicating that individuals that perform best at a given Ta also perform best at another Ta. Moreover, thermal sensitivity of jumping endurance significantly differed among individuals, with individuals of high performance at low Ta displaying the highest sensitivity to Ta. Individual differences in terrestrial performance increased with decreasing Ta, which is opposite to results obtained in lizards at the inter-specific and among-individual levels. To verify the generality of these patterns, we need more studies on individual variation in thermal reaction norms for locomotor performance in lizards and frogs.

Individual (co)variation in thermal reaction norms of standard and maximal metabolic rates in wild-caught slimy salamanders

Standard metabolic rate (SMR) and maximal metabolic rate (MMR) are fundamental measures in ecology and evolution because they set the scope within which animals can perform activities that directly affect fitness. In ectotherms, both SMR and MMR are repeatable over time when measured at a single ambient temperature (Ta). Many ectotherms encounter variable Ta from day to day and over their lifetime, yet it is currently unknown whether individual differences hold across an ecologically relevant range of Ta (i.e. thermal repeatability; RT). Moreover, it is possible that thermal sensitivity of SMR and MMR are important individual attributes, and correlated with one another, but virtually nothing is known about this at present. We measured SMR and MMR across an ecologically relevant Ta gradient (i.e. from 10 to 25 °C) in wild-caught salamanders (Plethodon albagula) and found that RT was significant in both traits. SMR and MMR were also positively correlated, resulting in a lower RT in absolute and factorial aerobic scopes (AAS and FAS). We found significant individual differences in thermal sensitivity for both SMR and MMR, but not for AAS and FAS. The intercept (at Ta = 0 °C) and the slope of the thermal reaction norms were negatively correlated; individuals with low MR at low Ta had a higher thermal sensitivity. Finally, individuals with a high thermal sensitivity for SMR also had high thermal sensitivity for MMR. Our results suggest that natural selection occurring over variable Ta may efficiently target the overall level of - and thermal sensitivity in - SMR and MMR. However, this may not be the case for metabolic scopes, as the positive correlation between SMR and MMR, in addition to their combined changes in response to Ta, yielded little individual variation in AAS and FAS. Our results support the idea that organisms with low metabolism at low Ta have a high metabolic thermal sensitivity as a compensatory mechanism to benefit in periods of warmer environmental conditions. Hence, our study reveals the importance of considering within-individual variation in metabolism, as it may represent additional sources of adaptive (co)variation.

Monitoring and analysis of respiratory patterns using microwave doppler radar

 Noncontact detection characteristic of Doppler radar provides an unobtrusive means of respiration detection and monitoring. This avoids additional preparations, such as physical sensor attachment or special clothing, which can be useful for certain healthcare applications. Furthermore, robustness of Doppler radar against environmental factors, such as light, ambient temperature, interference from other signals occupying the same bandwidth, fading effects, reduce environmental constraints and strengthens the possibility of employing Doppler radar in long-term respiration detection, and monitoring applications such as sleep studies. This paper presents an evaluation in the of use of microwave Doppler radar for capturing different dynamics of breathing patterns in addition to the respiration rate. Although finding the respiration rate is essential, identifying abnormal breathing patterns in real-time could be used to gain further insights into respiratory disorders and refine diagnostic procedures. Several known breathing disorders were professionally role played and captured in a real-time laboratory environment using a noncontact Doppler radar to evaluate the feasibility of this noncontact form of measurement in capturing breathing patterns under different conditions associated with certain breathing disorders. In addition to that, inhalation and exhalation flow patterns under different breathing scenarios were investigated to further support the feasibility of Doppler radar to accurately estimate the tidal volume. The results obtained for both experiments were compared with the gold standard measurement schemes, such as respiration belt and spirometry readings, yielding significant correlations with the Doppler radar-based information. In summary, Doppler radar is highlighted as an alternative approach not only for determining respiration rates, but also for identifying breathing patterns and tidal volumes as a preferred nonwearable alternative to the conventional - ontact sensing methods.

Composition of fuel stores and digestive limitations to fuel deposition rate in the long-distance migratory thrush nightingale, Luscinia luscinia

During their autumn migratory phase, thrush nightingales (Luscinia luscinia) previously starved for 2 d were allowed to refuel under three different ambient temperature conditions (-7 degrees, 7 degrees, and 22 degrees C). During the refueling period, as well as during the preceding control and starvation periods, food intake, body mass, and feces production were monitored. In addition, daily energy expenditure was measured during the refueling period. The compilation of the energy balance during the refueling period revealed an energy density of the deposited tissue of 33.6 kJ g-1. Assuming that the deposited tissue consists of fat and protein exclusively, with energy densities of 39.6 and 5.5 kJ g-1 wet mass, respectively, we estimated the deposited tissue to consist of 82% fat and 18% wet protein (6% dry protein and 12% water). Nitrogen balances during control, starvation, and refueling phases and during a period of prolonged and complete starvation indicated that 5% of the nutrient stores consisted of dry protein. Our results support recent findings that nutrient stores for migration often contain protein in addition to fat and consequently are 15%-25% less energy rich than pure fat stores. These proteins might be stored as muscle or other functional tissue and may be required to support the extra mass of the stores and/or reflect an incapacity of the metabolic machinery to catabolize far exclusively. Fuel deposition rate was positively related with ambient temperature, whereas food intake rate was unaffected by temperature. These results indicate that the rate of fuel deposition is limited by a ceiling in food intake rate; when this ceiling is reached, fuel deposition rate is negatively affected by daily energy expenditure rate. To a certain extent, the ceiling in food intake rate varies depending on feeding conditions over the previous days. These variations in food intake capacity probably reflect the building and breakdown of gut tissues and/or gut enzyme systems and might be insensible and not evolutionary adaptive. Significant energetic costs, however, are probably associated with the maintenance of gut tissues. It is therefore feasible that changes in digestive capacity are regulated and are directed at energy economization.

Metabolic constraints on long-distance migration in birds

The flight range of migrating birds depends crucially on the amount of fuel stored by the bird prior to migration or taken up en route at stop-over sites. However, an increase in body mass is associated with an increase in energetic costs, counteracting the benefit of fuel stores. Water imbalance, occurring when water loss exceeds metabolic water production, may constitute another less well recognised problem limiting flight range. The main route of water loss during flight is via the lungs; the rate of loss depends on ambient temperature, relative humidity and ventilatory flow and increases with altitude. Metabolite production results in an increased plasma osmolality, also endangering the proper functioning of the organism during flight. Energetic constraints and water-balance problems may interact in determining several aspects of flight behaviour, such as altitude of flight, mode of flight, lap distance and stop-over duration. To circumvent energetic and water-balance problems, a bird could migrate in short hops instead of long leaps if crossing of large ecological barriers can be avoided. However, although necessitating larger fuel stores and being more expensive, migration by long leaps may sometimes be faster than by short hops. Time constraints are also an important factor in explaining why soaring, which conserves energy and water, occurs exclusively in very large species: small birds can soar at low speeds only. Good navigational skills involving accurate orientation and assessment of altitude and air and ground speed assist in avoiding physiological stress during migration.

Fluid intake, hydration, work physiology of wildfire fighters working in the heat over consecutive days

PURPOSE: (i) To evaluate firefighters' pre- and post-shift hydration status across two shifts of wildfire suppression work in hot weather conditions. (ii) To document firefighters' fluid intake during and between two shifts of wildfire suppression work. (iii) To compare firefighters' heart rate, activity, rating of perceived exertion (RPE), and core temperature across the two consecutive shifts of wildfire suppression work. METHOD: Across two consecutive days, 12 salaried firefighters' hydration status was measured immediately pre- and post-shift. Hydration status was also measured 2h post-shift. RPE was also measured immediately post-shift on each day. Work activity, heart rate, and core temperature were logged continuously during each shift. Ten firefighters also manually recorded their food and fluid intake before, during, and after both fireground shifts. RESULTS: Firefighters were not euhydrated at all measurement points on Day one (292±1 mOsm l(-1)) and euhydrated across these same time points on Day two (289±0.5 mOsm l(-1)). Fluid consumption following firefighters' shift on Day one (1792±1134ml) trended (P = 0.08) higher than Day two (1108±1142ml). Daily total fluid intake was not different (P = 0.27), averaging 6443±1941ml across both days. Core temperature and the time spent ≥ 70%HRmax were both elevated on Day one (when firefighters were not euhydrated). Firefighters' work activity profile was not different between both days of work. CONCLUSION: There was no difference in firefighters' pre- to post-shift hydration within each shift, suggesting ad libitum drinking was at least sufficient to maintain pre-shift hydration status, even in hot conditions. Firefighters' relative hypohydration on Day one (despite a slightly lower ambient temperature) may have been associated with elevations in core temperature, more time in the higher heart rate zones, and 'post-shift' RPE.