Structural health monitoring: a practical approach to achieving in-situ and site-specific warning of pipeline corrosion and coating failure

An approach to achieving the ambitious goal of cost effectively extending the safe operation life of energy pipelines to, for instance, 100 years is the application of structural health monitoring and life prediction tools that are able to provide long-term remnant pipeline life prediction and in-situ pipeline condition monitoring. A critical step in pipeline structural health monitoring is the enhancement of technological capabilities that are required for quantifying the effects of key factors influencing buried pipeline corrosion and environmentally assisted materials degradation, and the development of condition monitoring technologies that are able to provide in-situ monitoring and site-specific warning of pipeline damage. This paper provides an overview of our current research aimed at developing new sensors for monitoring, categorising and quantifying the level and nature of external pipeline and coating damages under the combined effects of various inter-related variables and processes such as localised corrosion, coating damage and disbondment, cathodic shielding. The concept of in-situ monitoring and site-specific warning of pipeline corrosion is illustrated by a case of monitoring localised corrosion under disbonded coatings using a new corrosion monitoring probe. A basic principle that underpins the use of sensors to monitor localised corrosion has been presented: Localised corrosion and coating failure are not an accidental occurrence, it occurs as the result of fundamental thermodynamic instability of a metal exposed to a specific environment. Therefore corrosion and coating disbondment occurring on a pipeline will also occur on a sensor made of the same material and exposed to the same pipeline condition. Although the exact location of localised corrosion or coating disbondment could be difficult to pinpoint along the length of a buried pipeline, the ‘worst-case scenario’ and high risk pipeline sections and sites are predictable. Sensors can be embedded at these strategic sites to collect data that contain ‘predictor features’ signifying the occurrence of localised corrosion, CP failure, coating disbondment and degradation. Information from these sensors will enable pipeline owners to prioritise site survey and inspection operations, and to develop maintenance strategy to manage aged pipelines, rather than replace them.

Considerations associated with the testing of external pipeline coatings

Reliable testing methodologies for the assessment of protective coatings are critical for ensuring the integrity and durability of pipeline coatings (such as field joint coatings) and the mitigation of pipeline corrosion. Currently the failure of joint coatings is one of the major concerns in corrosion protection of pipelines, although they represent only approximately 5% of the coated area in a pipeline system. This paper presents an overview of major testing methodologies currently used in the pipeline industry for the selection, testing, and life prediction of coatings, in particular field joint coatings. Particular focus is on the discussion of difficulties and limitations in testing methods for assessing pipeline coating cracking, cathodic disbondment and loss of adhesion. It is shown that there are limitations in current methodologies in evaluating the coating flexibility - a key parameter for avoiding coatings cracking during hydrostatic testing, cyclic pressure operation and field bending. Methodologies for assessing the effect of holidays in coatings on the cathodic disbondment of pipeline coating under excessively negative cathodic protection (CP) voltages also require improvement. Furthermore, methods for understanding the effects of coating wet adhesion on pipeline coating, cracking and disbondment also need attention. Some preliminary results for addressing some of these issues are also presented in this paper.

An enhanced method for determining the maximum strain a pipeline coating could tolerate

An enhanced mandrel bend testing method has been proposed for the evaluation of the maximum strain level that could be tolerated by an organic coating, and for the understanding of localised coating deformation and cracking behaviours under nonuniform mechanical strains. The aim is to develop a practical method that is suitable for selecting pipeline coatings in order to ensure that the selected coatings have sufficient flexibility to meet the high strain demand during the construction, hydrostatic testing and operation of high pressure pipelines. Two new mandrel bend testing setups have been designed by employing either centre or end clamps in order to improve the uniformity of strain distributions over coated steel coupons, and by using strain gauges to perform in situ measurements of local strains. A series of tests have been carried out to evaluate the new method for testing the flexibility of selected epoxy based pipeline industry coatings. Preliminary computational simulation has also been carried out for assisting the interpretation of mandrel bending test results.

In situ measurement of pipeline coating integrity and corrosion resistance losses under simulated mechanical strains and cathodic protection

A novel experimental assembly consisting of a specially designed tensile testing rig and a standard electrochemical flat cell has been designed for simulating buried high pressure pipeline environmental conditions in which a coating gets damaged and degrades under mechanical strain, and for studying the influence of mechanically induced damages such as the cracking of a coating on its anti-corrosion property. The experimental assembly is also capable of applying a cathodic protection (CP) potential simultaneously with the mechanical strain and environmental exposure. The influence of applied mechanical strain as well as extended exposure to the corrosive environment, coupled with the application of CP, has been investigated based on changes in electrochemical impedance spectroscopy (EIS). Preliminary results show that the amplitude of the coating impedance decreases with an increase in the applied strain level and the length of environmental exposure. The EIS characteristics and changes are found to correlate well with variations in coating cracking and degradation features observed on post-test samples using both optical microscopy and scanning electron microscopy. These results demonstrate that this new experimental method can be used to simulate and examine coating behaviour under the effects of complex high pressure pipeline mechanical, electrochemical and environmental conditions.

The future of psychoanalytic institutes

The author contends that both conceptual and institutional problems permeate psychoanalytic institutes. Although institutional problems are historically based, they also derive from confusions around ill-defined concepts that lead to arbitrariness, authoritarianism, and the stifling of creativity. Psychoanalysis is a humanistic discipline that is touted as a science but is organized as a religion. Problems surrounding the right to train pervade psychoanalytic schisms, and transmission comes through processes of anointment. Institutional "false expertise" invokes the aura of anointment where training analysts pass down received truth through an esoteric pipeline depending on genealogy instead of function. Quasi-religious thinking and politics rush in to fill the gap between the level of claimed knowledge that affords qualification and the far lower level of real knowledge. Institutes should rely on evidence of candidates' performance and engage in open-ended inquiry

From Flysch to Molasse - sedimentary and tectonic evolution of late Caledonian - early Hercynian Foreland Basin in North Qilian Mountains

The Late Caledonian to Early Hercynian North Qilian orogenic belt in northwestern China is an elongate tectonic unit situated between the North China plate in the north and the Qaidam plate in the south. North Qilian started in the latest Proterozoic to Cambrian as a rift basin on the southern margin of North China, and evolved later to an archipelagic ocean and active continental margin during the Ordovician and a foreland basin from Silurian to the Early and Middle Devonian. The Early Silurian flysch and submarine alluvial fan, the Middle to Late Silurian shallow marine to tidal flat deposits and the Early and Middle Devonian terrestrial molasse are developed along the corridor Nanshan. The shallowing-upward succession from subabyssal flysch, shallow marine, tidal flat to terrestrial molasse and its gradually narrowed regional distribution demonstrate that the foreland basin experienced the transition from flysch stage to molasse stage during the Silurian and Devonian time.

Bioinformatic workflows : G-PIPE as an implementation

We present G-PIPE, a graphic pipeline generator for PISE that allows the definition of pipelines, parameterization of its component methods, and storage of metadata in XML formats. Our implementation goes beyond macro capacities currently in PISE. As the entire analysis protocol is defined in XML, a complete bioinformatic experiment (linked sets of methods, parameters and results) can be reproduced or shared among users. We also discuss the role of ontologies as as guidance systems in order to provide users with the possibility to define abstract work-flows, and execute them. A relevant baseline ontology is presented. Availability: http://if-web.imb.uq.edu.au

First record of contourites from Lower Devonian Liptrap Formation in southeast Australia

Typical contourite deposits associated with submarine turbidite fan deposits are recognized for the first time from the Lower Devonian Liptrap Formation at Cape Liatrap, Victoria in southeast Australia. The contourites are well integrated within the turbidite fan deposits and are characterized by thin (5–8 cm), lenticular, well-sorted coarse-grained siltstones to fine-grained sandstones with current-ripples and cross beddings. The palaeocurrent directions of the turbidite fan and contourites are perpendicular to each other, with the former directed generally westward while the latter varying from 165° to 190° southward. In view of the facies types and architecture, we suggest that the turbidite fan was developed at the base of a westward inclined palaeo-slope, at the front of which the contourites were deposited as a result of southward flowing deep-sea contour (geostrophic) currents. The depositional setting interpreted for the Liptrap Formation thus may provide a provisional model for the Lower Devonian continental slope and abyssal basin environment in the southeastern part of the Melbourne Trough.

Why do medical graduates choose rural careers?

Introduction: This study is based on the metaphor of the ‘rural pipeline’ into medical practice. The four stages of the rural
pipeline are: (1) contact between rural secondary schools and the medical profession; (2) selection of rural students into medical
programs; (3) rural exposure during medical training; and (4) measures to address retention of the rural medical workforce.
Methods: Using the rural pipeline template we conducted a literature review, analysed the selection methods of Australian
graduate entry medical schools and interviewed 17 interns about their medical career aspirations.
Results: Literature review: The literature was reviewed to assess the effectiveness of selection practices to predict successful
gradation and the impact of rural pipeline components on eventual rural practice. Undergraduate academic performance is the
strongest predictor of medical course academic performance. The predictive power of interviews is modest. There are limited data
on the predictive power of other measures of non-cognitive performance or the content of the undergraduate degree. Prior rural
residence is the strongest predictor of choice of a rural career but extended rural exposure during medical training also has a
significant impact. The most significant influencing factors are: professional support at national, state and local levels; career
pathway opportunities; contentedness of the practitioner’s spouse in rural communities; preparedness to adopt a rural lifestyle;
educational opportunities for children; and proximity to extended family and social circle. Analysis of selection methods: Staff
involved in student selection into 9 Australian graduate entry medical schools were interviewed. Four themes were identified:
(1) rurality as a factor in student selection; (2) rurality as a factor in student selection interviews; (3) rural representation on student
selection interview panels; (4) rural experience during the medical course. Interns’ career intentions: Three themes were identified:
(1) the efficacy of the rural pipeline; (2) community connectedness through the rural pipeline; (3) impediments to the effect of the
rural pipeline, the most significant being a partner who was not committed to rural life
Conclusion: Based on the literature review and interviews, 11 strategies are suggested to increase the number of graduates
choosing a career in rural medicine, and one strategy for maintaining practitioners in rural health settings after graduation.

Late Silurian trace fossils from the Melbourne Formation, Studley Park, Victoria, southeastern Australia

An ichnoassemblage of 10 ichnospecies is described for the first time from the Late Silurian Melbourne Formation at Studley Park, Victoria, southeastern Australia. The ichnofauna is preserved in a typical deep-water turbidite succession of alternating thin- to thick-bedded sandstone and thin- to medium-bedded mudrocks. Trace fossils observed within the study site have been assigned to three main ichnofacies. Ichnofacies 1 is best developed on the linguoid-rippled upper surface of thin sandstone beds and includes Laevicyclus, Aulichnites, Nereites, Helminthoidichnites, small Chondrites and possible Zoophycos. Ichnofacies 2 is very similar to Ichnofacies 1 in ichnospecies composition but instead contains large forms of Chondrites together with other thin burrow types usually poorly preserved and in very low abundance compared with Ichnofacies 1. Ichnofacies 3 is preserved mainly as casts on the underside of medium- to thick-bedded turbiditic sandstones, and has a very low diversity, with Planolites being the most common trace. A detailed analysis of the ichnofabrics and tiering structures of these ichnofacies suggest that Ichnofacies 1 and 3 represent "simple tiering’, in contrast to Ichnofacies 2, which is more characteristic of 'complex tiering’. Despite the differences in ichnospecies composition and ichnofabrics between the three recognized ichnofacies, the collective ichnoassemblage from the study site can be assigned confidently to the Nereites ichnofacies and is, therefore, interpreted to have formed in a distal submarine fan environment of lower bathyal to abyssal depth. Further, it is possible to recognize two main subenvironments within this deep-sea setting to account for the differences between the ichnofacies. Ichnofacies 1 and 2 are interpreted to represent a typical Nereites ichnofacies located on a level basin floor subenvironment of relatively low energy conditions at the distal end of a submarine fan deposit. In comparison, Ichnofacies 3 is dominated by Planolites with rare other facies-crossing trace fossil forms, and lacks Nereites. It is, therefore, best interpreted as representing a relatively high-energy environment, possibly a distributary channel near the distal end of the submarine fan system.

Constructing Australia : a companion to the ABC TV series

This engaging collection tells the story of how three of Australia's greatest man made-icons were built. The making of the Harbour Bridge, the creation of the Telegraph Line across Australia and the building of the pipeline from Perth to Kalgoolie.

A profiling based task scheduling approach for multicore network processors

 Multicore network processors have been playing an increasingly important role in computational processes, which emphasize on scalability and parallelism of the systems, in distributed environments especially in Internet-based delay-sensitive applications. It is an important but unsolved issue, however, to efficiently schedule tasks in network processors with multicore and multithread for improving the system throughput as much as possible. Profiling can gather runtime environment information and guide the compiler to optimize programs through scheduling tasks based on the runtime context. This paper proposes a profiling-based task scheduling approach, targeting on improving the throughput of multicore network processor (Intel IXP) systems in the balanced pipeline way. In this work, we investigate a profiling-based task scheduling framework, a task scheduling algorithm, and a set of performance models. Our task allocation scheme maps tasks onto the pipeline architecture and multiple threads of network processors in parallel, which incorporates the profiling context and global thread refinement. We evaluate our task scheduling algorithm by implementing representative network applications on the Intel IXP network processor. Experimental results demonstrate that our algorithm is able to schedule tasks in a balanced pipeline fashion and achieve the high throughput and data transmission rate. Copyright © 2012 John Wiley & Sons, Ltd.

FEM calibrated ARMAX model updating method for time domain damage identification

Due to environmental loads, mechanical damages, structural aging and human factors, civil infrastructure inevitably deteriorate during their service lives. Since their damage may claim human lives and cause significant economic losses, how to identify damages and assess structural conditions timely and accurately has drawn increasingly more attentions from structural engineering community worldwide. In this study, a fast and sensitive time domain damage identification method will be developed. To do this, a finite element model of a steel pipe laid on the soil is built and the structural responses are simulated under different damage scenarios. Based on the simulated data, an Auto Regressive Moving Average Exogenous (ARMAX) model is then built and calibrated. The calibrated ARMAX model is used to identify different damage scenarios through model updating process using clonal selection algorithm (CSA). The results demonstrate the application potential of the proposed method in identifying the pipeline conditions. To further verify its performance, laboratory tests of a steel pipe laid on the soil with and without soil support (free span damage) are carried out. The identification results of pipe-soil system show that the proposed method is capable of identifying damagein a complex structural system. Therefore, it can be applied to identifying pipeline conditions.

Zebrafish as a genetic model in pre-clinical drug testing and screening

The traditional drug discovery pipeline for the identification and development of compounds that selectively target specific molecules to ameliorate disease remains a major focus for medical research. However, the zebrafish is increasingly providing alternative strategies for various components of this pipeline. Zebrafish and their embryos are small, easily accessible and relatively low cost, making them applicable to high-throughput, small molecule screening. Zebrafish can also be manipulated by a range of forward and reverse genetics techniques to facilitate gene discovery and functional studies. Moreover, their physiological and developmental complexity provides accurate models of human disease to underpin mechanism of action and in vivo validation studies. Finally, several of these biological characteristics make zebrafish eminently suitable for toxicity testing, including eco-toxicology. Here we review the application of zebrafish to preclinical drug development and toxicity testing, including recent advances in mutant generation, drug screening and toxicology that serve to further enhance the capabilities of this valuable model organism in drug discovery.

Corrosion monitoring under disbonded coatings

Localized corrosion can occur under disbonded coatings threatening the safe operation of industry infrastructures such as underground oil and gas pipelines. Currently the assessment of localised corrosion under coating defects is a major technical challenge. The application of corrosion probes to monitor corrosion under disbonded coating also remains a difficulty. This paper presents a new corrosion sensor concept capable of electrochemically measuring corrosion rates under disbonded coatings on cathodically protected structures such as energy pipelines. Examples of its capabilities are illustrated with experimental data obtained in low conductivity aqueous solutions.