Size effects in micro cup drawing

Experimental studies into the effect of blank thickness on the deep drawing response of the coarse-grained and ultrafine-grained copper demonstrated the occurrence of a size effect: the dependence of the maximum load and the limit drawing ratio on the blank thickness in sub-millimetre range. A dislocation based constitutive model taking into account the thickness effects was used for numerical simulations of the process. It was demonstrated that the occurrence of the blank thickness effect is governed by the ratio of the blank thickness t to the grain size D of the material. Critical values of the t/. D ratio below which the size effect comes to bearing were determined. The obtained results can be seen as a demonstration of more general suitability of the model developed for predicting microforming operations with full account of the specimen or work-piece dimensions.

Revisiting capital structure theory : a test of pecking order and static order trade-of model from Malaysian capital market

This study revisits the capital structure theory and test Pecking Order Hypothesis (POH) and Static Order Trade-off theory (STOT) using Malaysian Listed firms over a period from 1999 to 2002. The evidence from pecking order model suggests that the internal fund deficiency is the most important determinant that possibly explains the issuance of new debt in Malaysian capital market despite the lower predicting power.  While static trade off-model is not fit to explain the issuance of new debt issue in Malaysian capital market. This is an interesting findings that confirm the fact that Malaysian firms do not too much care about tax-shield benefit derive from employ both debt and non-debt tax-shield. The finn's size, which is used to neutralize the size effect, appears to provide some explanation for the variation in its capital structure policy choice; however asset structure and growth no evidence of static-order-trade-off is observed in Malaysian capital market.

Characterisation of Ni–Ti thin films produced by filtered arc deposition

Ti–49.5 at%Ni thin films have been formed by deposition onto Si and glass substrates using a filtered arc deposition system (FADS). The films deposited on glass were composed of nanocrystalline parent phase grains contained within an amorphous matrix. The films deposited onto silicon were crystalline, and were largely parent phase whereas a bulk alloy of the same composition would be expected to be martensite. The stabilisation of the parent phase is proposed to be a grain size effect, with the critical grain size for parent phase stabilisation being about 30 nm.

Corporate governance structure and firm performance : empirical evidence from Brusa Malaysia, Kuala Lumper

The issue of corporate governance has been emerging as important phenomena that has been searched extensively both in developed countries due to its strategic impact on the monitoring of management activities and firms’ performance. Yet little attempt has been made in developing countries like Malaysia to ascertain what constitute corporate governance and its impact on firm's performance. Therefore, this study aims at examining the structure of the corporate governance and its impact on firm’s performance. This study is based on 100 firms, which are the component of the Composite Index (CI) serve as market barometer. This study employs cross-sectional annual multiple regression model to examine, what constitutes the corporate governance structure and its impact on performance of the firm. The analysis was based on annual regression over 5 years period from 1997 through 2001. Three different blend of surrogate for corporate governance were developed for good corporate governance structure. These are the independent non-executive (outside) directors, audit committee and remuneration committee. To isolate the size effect from the impact of corporate governance structure on firm’s performance, firm’s size was also included are variable in the model. The ratio of net income before tax to total asset is used as a surrogate for firm’s performance. Evidence from the study indicates that there is partial relation between corporate governance structure and corporate performance. The presence of both audit and remuneration committee serves as an important monitoring device to control management activities that lead to increase firm's performance. While on average, the presence of independent nonexecutive directors does not provide any significant explanation for the firm's performance. However, the firm size appears to have significant impact on corporate performance.

An analysis of student engagement when taught in classes of different sizes in rural, regional and metropolitan campuses of an Australian university

This study investigates the impact of class size on student engagement and student performance. It is based on an analysis of student university enter scores, student grades and student evaluations in metropolitan, regional and rural campuses of an Australian universityduring trimester 1 of years 2008, 9 & 10. Past literature appears to support the predominant influence of the class size effect on learning, though some findings are mixed and inconclusive. Contrary to the accepted view that higher entry level scores result in higher grades and, conversely, lower entry level scores result in lower grades, the findings suggest that factorsother than entry level scores, contribute to student outcomes and student engagement. The study reveals that student satisfaction of teaching quality is higher in the rural and regional campuses where the cohorts are smaller than at the metropolitan campus. This may be an indication that class size seems to have a predominant influence on student engagement and learning outcomes.

Synthesis and characterization of hexagonal and truncated hexagonal shaped MoO3 nanoplates

Hexagonal and truncated hexagonal shaped MoO₃ nanoplates (MoO₃ HNP) were synthesized through a simple vapor-deposition method in Ar atmosphere under ambient pressure without the assistant of any catalysts. The structure and morphology of MoO₃ HNP were investigated by XRD, EDX, SEM, TEM, and HRTEM. The results reveal that the HNP are α-MoO₃ and have a large area surface. The Raman spectrum shows a significant size effect on the vibrational property of MoO₃ HNP. The photoluminescence (PL) spectrum was carried out, and two peaks at 351 and 410 nm were observed in the spectrum. In addition, a possible growth mechanism proposed as VS is discussed in detail.

Large-scale synthesis and growth mechanism of single-crystal Se nanobelts

Single-crystal trigonal (t) Se nanobelts have been synthesized on a large scale by reducing SeO2 with glucose at 160 °C. Electron microscopy images show that the nanobelts are 80 nm in diameter, 25 nm in thickness, and up to several hundreds of micrometers in length. HRTEM images prove that the nanobelts are single crystals and preferentially grow along the [001] direction. The time-dependent TEM images revealed that the formation and growth of t-Se nanobelts were governed by a solid−solution−solid growth mechanism. The redox reaction directly produced amorphous (α) Se nanoparticles under hydrothermal conditions. t-Se nanobelts were formed by dissolution and recrystallization of the initial α-Se nanoparticles under the functional capping of poly(vinylpyrrolidone) (PVP). The nanobelts obtained exhibit a quantum size effect in optical properties, showing a blue shift of the band gap and direct transitions relative to the values of bulk t-Se.

Nature of hardness evolution in nanocrystalline NiTi shape memory alloys during solid-state phase transition

Due to a distinct nature of thermomechanical smart materials' reaction to applied loads, a revolutionary approach is needed to measure the hardness and to understand its size effect for pseudoelastic NiTi shape memory alloys (SMAs) during the solid-state phase transition. Spherical hardness is increased with depths during the phase transition in NiTi SMAs. This behaviour is contrary to the decrease in the hardness of NiTi SMAs with depths using sharp tips and the depth-insensitive hardness of traditional metallic alloys using spherical tips. In contrast with the common dislocation theory for the hardness measurement, the nature of NiTi SMAs' hardness is explained by the balance between the interface and the bulk energy of phase transformed SMAs. Contrary to the energy balance in the indentation zone using sharp tips, the interface energy was numerically shown to be less dominant than the bulk energy of the phase transition zone using spherical tips.

Whether smaller plates reduce consumption depends on who’s serving and who’s looking: a meta-analysis

The literature on whether varying plate size has an effect on consumption is mixed and contradictory.This meta-analysis of 56 studies from 20 papers shows that varying the size of the container holding food (e.g., plate orbowl) has a substantial effect on amount self-served and/or consumed (Cohen’s d 5 .43). More generally, we found adoubling of plate size increased the amount self-served or amount consumed by 41%. Our analysis resolves the variouscontradictions of past reviews: we found that the plate-size effect had a substantial effect on amount self-served (d 5.51) and on amount consumed when the portion was self-served (d 5 .70) or manipulated along with (confoundedwith) plate size (d 5 48). However, plate size had no effect on amount consumed when the portion size was held constant(d 5 .03). Overall, plate size had a stronger effect when participants were unaware that they were participatingin a food study (d 5 .76).

Is momentum trading profitable from Shari'ah compliant stocks?

This research offers fresh evidence supporting the pervasiveness of the momentum effect. Two decades after the momentum profitability firstly documented by Jegadeesh and Titman (1993), yet little research has been specifically devised for the momentum profitability on Shari'ah compliant stocks. We assess the momentum profitability over the Shari'ah compliant stocks in a Malaysian setting. We find evidence of strong return persistence as far as toward four-year holding period. Interestingly, no significant momentum returns are found among the conventional stocks. Upon further exploration we find neither an industry-driven momentum effect nor the small size firms can account for the momentum returns. Using return persistency formation criteria, we further find that underreaction seems to well fit in explaining this unique long lasting momentum profitability.

The effect of mechanical loading on the size and shape of bone in pre-, peri-, and postpubertal girls: a study in tennis players

Exercise during growth results in biologically important increases in bone mineral content (BMC). The aim of this study was to determine whether the effects of loading were site specific and depended on the maturational stage of the region. BMC and humeral dimensions were determined using DXA and magnetic resonance imaging (MRI) of the loaded and nonloaded arms in 47 competitive female tennis players aged 8-17 years. Periosteal (external) cross-sectional area (CSA), cortical area, medullary area, and the polar second moments of area (I_p, mm⁴) were calculated at the mid and distal sites in the loaded and nonloaded arms. BMC and I _p of the humerus were 11-14% greater in the loaded arm than in the nonloaded arm in prepubertal players and did not increase further in peri- or postpubertal players despite longer duration of loading (both, _p < 0.01). The higher BMC was the result of a 7-11% greater cortical area in the prepubertal players due to greater periosteal than medullary expansion at the midhumerus and a greater periosteal expansion alone at the distal humerus. Loading late in puberty resulted in medullary contraction. Growth and the effects of loading are region and surface specific, with periosteal apposition before puberty accounting for the increase in the bone's resistance to torsion and endocortical contraction contributing late in puberty conferring little increase in resistance to torsion. Increasing the bone's rt.osistance to torsion is achieved hy modifying bone shape and mass, not necessarily bone density.

The effect of hook/bait size and angling technique on the hooking location and the catch of recreationally caught black bream Acanthopagrus butcheri

The black bream Acanthopagrus butcheri recreational fishery is the largest estuarine fishery in Victoria. This fishery is managed through legal-minimum length and daily bag limits. The success of this management strategy requires a high survival rate for released fish. Deep-hooking is known to reduce the chance of fish survival after recreational capture and release. This study investigated the potential to reduce deep-hooking and the number of under-size A. butcheri caught by varying angling gear and techniques. Three sizes of long shank hook (small [size 8], medium [size 4] and large [size 1/0]) and two angling techniques (slack line and tight line) were tested for their deep-hooking rates and selectivity characteristics. Increasing the hook size from small to large decreased the likelihood of deep-hooking by 6.6 times (95% CI 2.3–16.3 times). Fishing with a tight line instead of a slack line decreased the chance of deep-hooking by almost 100% (95% CI 0.8–3.6). Fishing with a large hook instead of a small hook significantly (F = 6.71, df = 2, P = <0.001) increased the mean A. butcheri length, although this mean size increase was less than 1 cm. This study was able to identify angling gear and angling technique manipulations that reduced the rate of deep-hooking when targeting A. butcheri in Victorian estuaries.