Shake rattle and roll: a journey with Parkinson's

This is the journey of a man suffering from Parkinson's disease. Ross Collins tells of his past twelve years' experiences of living with Parkinson's. Before, he had a steady job with Victoria Police, with promising future prospects; and was happily married with two young children. The disease struck him at an early age, changing his life and setting him on a different course. His outlook on life has changed, and his decision-making influenced; as well, his relationships with his family affected. He feels normal only when he is shaking, rattling and rolling along on his Harley. His wish for a cure leads him to pin his hopes on faith healing by the 'miracle man', in Brazil. The first two visits did not seem to have done anything to improve his physical condition. Ross is returning to Brazil for the third time, hoping against hope that his condition could be improved by a miracle healing. This documentary gives an intimate look into the life of a Parkinson's disease sufferer and that of his family. Includes al.

Phosphonium ionic liquids as lubricants for aluminium-steel

The performance of a series of novel room temperature ionic liquids (ILs) based on the trihexyl(tetradecyl)phosphoniumcation (P66614 +) and a number of novel anions have been studied in pin-on-disk tests using a 100Cr6 steel ball on AA2024 aluminium disks.

The anions coupled to the (P66614 +) cation include diphenyl phosphate (DPP-), dibutyl phosphate (DBP-), bis (2,4,4-trimethyl pentyl) phosphinate (M3PPh-) and bis(2-ethyl hexyl) phosphate (BEH-).

More traditional anions such as bis(trifluoromethanesulfonyl) amide (NTf2 -) and bromide (Br-) were also investigated. Experiments were conducted at various loads to assess the IL film forming abilities.

The results suggest that the structure of the anion is important in forming a surface film that reduces the friction and wear of the aluminium disk. At 30N five of the six ILs tested showed a 30-90% reduction in wear, as determined from wear scar depth measurements, compared to fully formulated diesel oil.

The IL lubricant with a diphenyl phosphate anion achieved the lowest wear coefficient, showing a better performance than a typical fluorine-containing IL anion, NTf2.

To further investigate wear mechanisms and surface interactions the wear scars were analysed using a scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS).

Material flow forming the shoulder flow zone using scroll shoulder tool during friction stir welding of thick section aluminum alloys

Scroll shoulder tools are widely used and they do not need to be tilted during friction stir welding (FSW). However, the detailed material flow, which is important for proper scroll shoulder tool design and subsequently for forming the defect-free shoulder flow zone, has not been fully explained. In the present study, features of material flow in shoulder flow zone, during FSW of thick 6061 aluminium (Al) plates using a scroll shoulder tool were investigated. It was observed that there is a simple layer-to-layer banded structure which appears in the bottom portion of shoulder flow zone, but disappears in the top portion of this weld zone. When the scroll shoulder tool is plunged into the workpiece to a determined depth, the workpiece material is extruded by the tool pin, and pushed up into the scroll groove beneath the shoulder forming the pick-up material. During the forward movement of the tool, the central portion of pick-up material was driven downward by the root portion of pin and then it detaches from the tip portion of pin in a layer-to-layer manner to form the weld.

Effects of temperature in relation to sheet metal stamping

The demand to reduce the use of lubricants and increase tool life in sheet metal stamping has resulted in increased research on the sliding contact between the tool and the sheet materials. Unlubricated sliding wear tests for soft carbon steel sliding on D2 tool steel were performed using a pin-on-disk tribometer. The results revealed that temperature has an influencing role in the wear of tool steel and that material transfer between tool and sheet can be minimized at a certain temperature range in sheet metal stamping.

ATM (cash machine) SFX

ATM (Cash Machine) sound effect.

Authenticating the identity of computer users with typing biometrics and the fuzzy min-max neural network

In this paper, typing biometrics is applied as an additional security measure to the password-based or Personal Identification Number (PIN)-based systems to authenticate the identity of computer users. In particular, keystroke pressure and latency signals are analyzed using the Fuzzy Min-Max (FMM) neural network for authentication purposes. A special pressure-sensitive keyboard is designed to collect keystroke pressure signals, in addition to the latency signals, from computer users when they type their passwords. Based on the keystroke pressure and latency signals, the FMM network is employed to classify the computer users into two categories, i.e., genuine users or impostors. To assess the effectiveness of the proposed approach, two sets of experiments are conducted, and the results are compared with those from statistical methods and neural network models. The experimental outcomes positively demonstrate the potentials of using typing biometrics and the FMM network to provide an additional security layer for the current password-based or PIN-based methods in authenticating the identity of computer users.

Sliding mode-like learning control for SISO complex systems with T-S fuzzy models

In this paper, a sliding mode-like learning control scheme is developed for a class of single input single output (SISO) complex systems. First, the Takagi-Sugeno (T-S) fuzzy modelling technique is employed to model the uncertain complex dynamical systems. Second, a sliding mode-like learning control is designed to drive the sliding variable to converge to the sliding surface, and the system states can then asymptotically converge to zero on the sliding surface. The advantages of this scheme are that: 1) the information about the uncertain system dynamics and the system model structure is not required for the design of the learning controller; 2) the closed-loop system behaves with a strong robustness with respect to uncertainties; 3) the control input is chattering-free. The sufficient conditions for the sliding mode-like learning control to stabilise the global fuzzy model are discussed in detail. A simulation example for the control of an inverted pendulum cart is presented to demonstrate the effectiveness of the proposed control scheme.

Application of growing self-organizing map to distinguish between finger tapping and non tapping from brain images

Growing self-organizing map (GSOM) has been characterized as a knowledge discovery visualization application which outshines the traditional self-organizing map (SOM) due to its dynamic structure in which nodes can grow based on the input data. GSOM is utilized as a visualization tool in this paper to cluster fMRI finger tapping and non- tapping data, demonstrating the visualization capability to distinguish between tapping or non-tapping. A unique feature of GSOM is a parameter called the spread factor whose functionality is to control the spread of the GSOM map. By setting different levels of spread factor, different granularities of region of interests within tapping or non-tapping images can be visualized and analyzed. Euclidean distance based similarity calculation is used to quantify the visualized difference between tapping and non tapping images. Once the differences are identified, the spread factor is used to generate a more detailed view of those regions to provide a better visualization of the brain regions.

Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds

Friction stir lap welding (FSLW) experiments have been conducted to study the effects of tool positioning on microstructures formed in the Al-to-steel interface region and on joint strength, defined as maximum applied force over the width (F m/w s) of the test sample, of the welds. Various pin positioning and speed conditions were used in the FSLW experiments followed by microstructure examination on the interface regions and tensile-shear testing on the welds, including an examination on crack propagation in mixed stir zone. It was found that when the pin was close to the bottom steel piece, Al-to-steel reaction occurred resulting in intermetallic outbursts formed along the interface. This represents the case of incomplete metallurgical joint. When the pin was lowered to just reach the steel, a thin and continued interface intermetallic layer formed. Evidences and consideration on growth kinetics have suggested that the layer could only remain thin (≤2.5 μm) during FSLW. This layer could bear a high load during tensile-shear testing and the adjacent aluminium deformed and fractured instead. The resulting F m/w s was high. When the pin penetrated to steel, F m/w s reduced due to brittle fracture being dominant inside mixed stir zone. Evidences have shown that the amount of penetration and speed condition during FSLW do not have large effects on F m/w s.

Characterization and tribological performance of Cu-based intermetallic layers

Fluidized bed reactor chemical vapor deposition (FBR-CVD) has been used to enrich the surface of oxygen free high conductivity (OFHC) copper with titanium, silicon and aluminum. This technique enables the production of coherent and adherent intermetallic surface layers of uniform thickness and high hardness. The characterization of the coatings was performed using backscatter scanning electron microscopy (BS-SEM), X-ray diffraction (XRD), glow discharge optical emission spectroscopy (GDOES) and micro-hardness. The tribological properties of the coatings in dry sliding contact with steel were evaluated by pin-on-disc wear testing.

Firm characteristics and information risk

Following the work of Easley et al. (2002) in documenting the effect of private information on cross-sectional stock returns, we examine the relationship between a firm’s fundamental characteristics and its probability of information-based trading (PIN). We find that asset turnover and dividend yields are important firm characteristics that influence a firm’s PIN. The findings also offer an alternative explanation as to why firm characteristics are informative about asset prices.

New results in robust functional state estimation using two sliding mode observers in cascade

 This paper presents a functional observer scheme using two sliding mode observers in cascade. A coordinate transformation is performed on the system such that existing sliding mode observer theory can be directly applied to achieve functional state estimation. The necessary and sufficient existence conditions for the scheme (in terms of the original system matrices) are also investigated, and they are found to be less stringent than earlier work on functional state estimation using one sliding mode observer; this could have benefits in terms of cost and simplicity. A numerical example verifies the effectiveness of the scheme.

Fast growing self organizing map for text clustering

This paper presents an integration of a novel document vector representation technique and a novel Growing Self Organizing Process. In this new approach, documents are represented as a low dimensional vector, which is composed of the indices and weights derived from the keywords of the document.

An index based similarity calculation method is employed on this low dimensional feature space and the growing self organizing process is modified to comply with the new feature representation model.

The initial experiments show that this novel integration outperforms the state-of-the-art Self Organizing Map based techniques of text clustering in terms of its efficiency while preserving the same accuracy level.

The millipedes of Barrow Island, Western Australia (Diplopoda)

Six species of millipedes are recorded from Barrow Island, including three species of pin-cushion millipedes of the order Polyxenida, Lophoturus madecassus (Marquet and Condé, 1950) (Lophoproctidae), Unixenus mjoebergi (Verhoeff, 1924) (Polyxenidae) and Phryssonotus novaehollandiae (Silvestri, 1923) (Synxenidae), a single species of the order Spirobolida, Speleostrophus nesiotes Hoffman, 1994 (Trigoniulidae), and two species of the order Polydesmida, Boreohesperus dubitalis Car and Harvey, 2013 (Paradoxosomatidae) and one species of the family Haplodesmidae (genus and species indet.). Lophoturus madecassus is circum-tropical in distribution, Unixenus mjoebergi and Phryssonotus novaehollandiae are found also on mainland Australia, but the other three species are endemic to the island. Speleostrophus nesiotes is a highly modified troglobiotic species, currently listed as threatened by the Western Australian government. It is unclear at present whether the haplodesmid specimen is a troglobite.