The application of Cd Se/ZnS quantum dots and confocal laser scanning microscopy for three-dimensional imaging of nanfibrous structures

This paper reports a fast, accurate, and non-destructive three-dimensional imaging approach based on using quantum dots and confocal laser scanning microscopy to get three-dimensional images of internal pore structure of the nanofibrous materials. A practical method of making the fiber fluorescent using quantum dots was applied before three-dimensional imaging by confocal laser scanning microscopy. Fibrous scaffolds with different porosity parameters produced by electrospinning and their three-dimensional pore structure was evaluated by this approach. Furthermore, the introduced approach can be used to measure the pore interconnectivity of the scaffold

A novel defect detection and identification method in optical inspection

Optical inspection techniques have been widely used in industry as they are non-destructive. Since defect patterns are rooted from the manufacturing processes in semiconductor industry, efficient and effective defect detection and pattern recognition algorithms are in great demand to find out closely related causes. Modifying the manufacturing processes can eliminate defects, and thus to improve the yield. Defect patterns such as rings, semicircles, scratches, and clusters are the most common defects in the semiconductor industry. Conventional methods cannot identify two scale-variant or shift-variant or rotation-variant defect patterns, which in fact belong to the same failure causes. To address these problems, a new approach is proposed in this paper to detect these defect patterns in noisy images. First, a novel scheme is developed to simulate datasets of these 4 patterns for classifiers' training and testing. Second, for real optical images, a series of image processing operations have been applied in the detection stage of our method. In the identification stage, defects are resized and then identified by the trained support vector machine. Adaptive resonance theory network 1 is also implemented for comparisons. Classification results of both simulated data and real noisy raw data show the effectiveness of our method.

A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models

Guided wave (GW) has been used for many years in non-destructive testing (NDT). There are various ways to generate the guided wave, including impact or impulse either manually or using devices. Although the method of impact or impulse is considered to be simple and practical in guided wave generation, it produces waves with broadband frequencies, which often make analysis much more difficult. The frequency bandwidth produced by manual impacts is usually at the low end, and is therefore justified when dealing with one dimensional wave propagation assumption in low strain integrity testing of cylindrical structures. Under such assumption if the velocity is known accurately, NDTs can produce reasonably good results for the condition assessment of the structure. However, for guided wave propagation in timber pole-like structures, it is rather complicated as timber is an orthotropic material and wave propagation in an orthotropic medium exhibits different characteristics from that in isotropic medium. It is possible to obtain solutions for guided wave propagation in orthotropic media for cylindrical structures, even though the orthotropic material greatly complicates GW propagation. In this paper, timber has been considered as a transversely isotropic (i.e. simplified orthotropic) material and a comparative study of GW propagation in a timber pole is conducted considering isotropic and transversely isotropic modelling. Phase velocity, group velocity and attenuation are the main parameters for this comparative study. Moreover, tractionfree situation and embedded geotechnical condition are also taken into consideration to evaluate the effect of boundary. Displacement profile, wave propagation pattern and power flow at particular frequency are utilized to determine different displacement components of longitudinal and flexural waves along and across the timber pole. Effect of temperature and moisture content (in terms of modulus of elasticity) in timber pole is also compared to show the variation in phase velocity.

Determination of the embedded lengths of electricity timber poles utilizing flexural wave generated from impacts

Round timbers are extensively used as utility poles in Australia for electricity distribution and communication. Lack of information on their conditions results in great difficulties on asset management for industries. Despite the development of various non-destructive testing (NDT) techniques for evaluating the condition of piles, few NDTs are reported for applications on timber poles. This paper addresses challenges and issues on development of NDTs for condition assessment and embedded length of timber poles. For this paper, it is mainly focusing on determining the embedded length of the pole considering loss of the sufficient embedment length is a main factor compromising capacity and safety of timber poles. Since it is impractical for generating longitudinal waves by impacting from the top of poles, utilizing flexural wave from side impact on poles becomes attractive. However, the flexural wave is known by its highly dispersive nature. In this paper, one dimensional wave theory, guided wave theory and advanced signal processing techniques have been introduced in order to provide a solution for the problem. Two signal processing techniques, namely short kernel method and continuous wavelet transform, have been investigated for processing flexural wave signals to evaluate wave velocity and embedment length of timber poles in service.

Determination of embedment depth of timber poles and piles using wavelet transform

This paper presents an investigation on the wave propagation in timber poles with Wavelet Transform (WT) analysis for identification of the condition and underground depth of embedded timber poles in service. Most of non-destructive testing (NDT) applications for timber poles using wave-based methods consider only single wave mode and no dispersion. However, for wave propagations in timber poles (damaged/undamaged), such simplification may not be correct, especially for broad band excitation using impulse impact. To investigate the problem, a 5m timber pole was investigated numerically and experimentally. A dispersion curve is generated from the numerical results to provide guidance on the velocity and wave mode selection. Continuous wavelet transform (CWT) is applied on the same signal to verify the presence of modes and to process data from experimental testing. The results are presented in both time domain and time-frequency domain for comparison. The results of the investigation showed that, wavelet transform analysis can be a reliable signal processing tool for NDT in terms of condition and embedment length determination.

Effect of elastic modulus and poisson's ratio on guided wave dispersion using transversely isotropic material modelling

Timber poles are commonly used for telecommunication and power distribution networks, wharves or jetties, piling or as a substructure of short span bridges. Most of the available techniques currently used for non-destructive testing (NDT) of timber structures are based on one-dimensional wave theory. If it is essential to detect small sized damage, it becomes necessary to consider guided wave (GW) propagation as the behaviour of different propagating modes cannot be represented by one-dimensional approximations. However, due to the orthotropic material properties of timber, the modelling of guided waves can be complex. No analytical solution can be found for plotting dispersion curves for orthotropic thick cylindrical waveguides even though very few literatures can be found on the theory of GW for anisotropic cylindrical waveguide. In addition, purely numerical approaches are available for solving these curves. In this paper, dispersion curves for orthotropic cylinders are computed using the scaled boundary finite element method (SBFEM) and compared with an isotropic material model to indicate the importance of considering timber as an anisotropic material. Moreover, some simplification is made on orthotropic behaviour of timber to make it transversely isotropic due to the fact that, analytical approaches for transversely isotropic cylinder are widely available in the literature. Also, the applicability of considering timber as a transversely isotropic material is discussed. As an orthotropic material, most material testing results of timber found in the literature include 9 elastic constants (three elastic moduli and six Poisson's ratios), hence it is essential to select the appropriate material properties for transversely isotropic material which includes only 5 elastic constants. Therefore, comparison between orthotropic and transversely isotropic material model is also presented in this article to reveal the effect of elastic moduli and Poisson's ratios on dispersion curves. Based on this study, some suggestions are proposed on selecting the parameters from an orthotropic model to transversely isotropic condition.

Behaviour of stress wave propagation in utility timber pole

Non-destructive testing has been used for many years to evaluate the in situ condition of timber piles. Longitudinal impact is usually applied on the top of piles to induce longitudinal wave to detect faults in piles due to the fact that the longitudinalwave has less dispersive nature at lowfrequency. On the other hand,when it comes to evaluation of poles in situ, it is different as poles are partly embedded in soil and it is more practical to produce bending waves, as the top of the pole is not easily accessible. However, bending wave is known for its highly dispersive nature; especially in the low frequency range which is usually induced in low strain integrity testing. As bending wave can be considered as a hybrid of longitudinal and shear waves, it will be helpful, if it could detect the component of these twowaves separately.To do so, components of displacements or accelerations along radial and longitudinal directions need to be determined. By applying Fast Fourier Transform (FFT) on the signals, the dominant frequencies can be obtained. It has been found that, the longitudinal component decreases along radial direction which indicates the presence of bending wave component and this finding allows to the application of ContinuousWavelet Transform (CWT) on the longitudinal component of wave signals in order to obtain phase velocity. Phase velocities at different frequencies are then determined to draw the dispersive curve and compare with analytical phase velocity curve. The dispersion curve matched well with the analytical curve. © 2013 Taylor & Francis Group.

Condition assessment of timber utility poles based on a hierarchical data fusion model

This paper proposes a novel hierarchical data fusion technique for the non-destructive testing (NDT) and condition assessment of timber utility poles. The new method analyzes stress wave data from multisensor and multiexcitation guided wave testing using a hierarchical data fusion model consisting of feature extraction, data compression, pattern recognition, and decision fusion algorithms. The researchers validate the proposed technique using guided wave tests of a sample of in situ timber poles. The actual health states of these poles are known from autopsies conducted after the testing, forming a ground-truth for supervised classification. In the proposed method, a data fusion level extracts the main features from the sampled stress wave signals using power spectrum density (PSD) estimation, wavelet packet transform (WPT), and empirical mode decomposition (EMD). These features are then compiled to a feature vector via real-number encoding and sent to the next level for further processing. Principal component analysis (PCA) is also adopted for feature compression and to minimize information redundancy and noise interference. In the feature fusion level, two classifiers based on support vector machine (SVM) are applied to sensor separated data of the two excitation types and the pole condition is identified. In the decision making fusion level, the Dempster–Shafer (D-S) evidence theory is employed to integrate the results from the individual sensors obtaining a final decision. The results of the in situ timber pole testing show that the proposed hierarchical data fusion model was able to distinguish between healthy and faulty poles, demonstrating the effectiveness of the new method.

Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling

Round timbers are used for telecommunication and power distribution networks, jetties, piles, short span bridges etc. To assess the condition of these cylindrical shape timber structures, bulk and elementary wave theory are usually used. Even though guided wave can represents the actual wave behaviour, a great deal complexity exists to model stress wave propagation within an orthotropic media, such as timber. In this paper, timber is modelled as transversely isotropic material without compromising the accuracy to a great extent. Dispersion curves and mode shapes are used to propose an experimental set up in terms of the input frequency and bandwidth of the signal, the orientation of the sensor and the distance between the sensors in order to reduce the effect of the dispersion in the output signal. Some example based on the simulated signal is also discussed to evaluate the proposed experimental set up.

Determinations of stress wave velocity in a timber pole using wavelet transform

This paper presents an application of Wavelet Transfonn (WT) for determination of stress wave velocity for Non-destructive Testing of timber utility poles in service. For surface Non-destructive Testing (NDT), the hammer impact, which produces generally broadband frequency excitation, is used to generate stress wave. Moreover, due to practicality the impact location for field testing of a utility pole is on the side of the pole and 1.5 m above ground level. And the geometry of utility pole could not guarantee non-dispersive longitudinal wave. All of these issues have resulted in lack of accuracy and reliability of results from surface NDT in field testing. In recognition of such problem, this research explores methods to reliably calculate desired wave velocity by isolating wave mode and studying dispersive nature of utility pole. Fast Fourier Transfonn (FFT) is firstly conducted to determine the suitable frequency from a stress wave data. Then WT is applied on the wave data mentioned to perfonn time-frequency analysis. Velocity can be detennined by time history data of desired frequency from WT results which will be compared with the available analytical solution for longitudinal wave velocity. The results of the investigation showed that wavelet transfonn analysis can be a reliable signal processing tool for non-destructive testing in tenns of velocity detennination, which in tum also helps to detennine the embedded length of the timber pole.

Ranking of fibre-reinforced composite plate surface finish quality by wavelet texture analysis

In the automotive and other industries, the visual appearance of external surfaces is a key factor in perceived product quality. Traditionally, the quality of an automotive surface finish has been judged by expert human auditors. A set of 17 fibre-reinforced composite plates was previously manufactured to have a range of surface finish qualities and these plates were ranked by three expert observers and also optically digitally imaged. Following validation of the previous rankings, the wavelet texture analysis (WTA) technique was applied to the digital photographs to derive an instrumental measure of surface finish quality based on the panel images. The rank correlation between the human expert surface finish quality ratings and those from the W TA image analysis process was found to be positive, large and statistically significant. This finding indicates that WTA could form the basis of an inexpensive and practical instrumental method for the ranking of fibre-reinforced composite surface finish quality.

Crack damage in polymers and composites: a review

Polymer-based materials are extensively used in various applications such as aircrafts, civilian structures, oil and gas platforms and electronics. They are, however, inherently damage prone and over time, the formation of cracks and microscopic damages influences the thermo-mechanical and electrical properties, which eventually results in the total failure of the materials. This paper provides an overview of the principal causes of cracking in polymer and composites and summarizes the recent progress in the development of non-destructive techniques in crack detection. Furthermore, recent progress in the development of bio-inspired self-healing methods in autonomic repair is discussed.