Parameters important in fabricating enzyme electrodes using self-assembled monolayers of alkanethiols

The fabrication of enzyme electrodes using self-assembled monolayers (SAMs) has attracted considerable interest because of the spatial control over the enzyme immobilization. A model system of glucose oxidase covalently bound to a gold electrode modified with a SAM of 3-mercaptopropionic acid was investigated with regard to the effect of fabrication variables such as the surface topography of the underlying gold electrode, the conditions during covalent attachment of the enzyme and the buffer used. The resultant monolayer enzyme electrodes have excellent sensitivity and dynamic range which can easily be adjusted by controlling the amount of enzyme immobilized. The major drawback of such electrodes is the response which is limited by the kinetics of the enzyme rather than mass transport of substrates. Approaches to bringing such enzyme electrodes into the mass transport limiting regime by exploiting direct electron transfer between the enzyme and the electrode are outlined.

Harvesting waste thermal energy using a carbon-nanotube-based thermo-electrochemical cell

Low efficiencies and costly electrode materials have limited harvesting of thermal energy as electrical energy using thermo-electrochemical cells (or “thermocells”). We demonstrate thermocells, in practical configurations (from coin cells to cells that can be wrapped around exhaust pipes), that harvest low-grade thermal energy using relatively inexpensive carbon multiwalled nanotube (MWNT) electrodes. These electrodes provide high electrochemically accessible surface areas and fast redox-mediated electron transfer, which significantly enhances thermocell current generation capacity and overall efficiency. Thermocell efficiency is further improved by directly synthesizing MWNTs as vertical forests that reduce electrical and thermal resistance at electrode/substrate junctions. The efficiency of thermocells with MWNT electrodes is shown to be as high as 1.4% of Carnot efficiency, which is 3-fold higher than for previously demonstrated thermocells. With the cost of MWNTs decreasing, MWNT-based thermocells may become commercially viable for harvesting low-grade thermal energy.

A potential-controlled switch on/off mechanism for selective excitation in mixed electrochemiluminescent systems

We demonstrate the complete, rapid, and reversible switching between the emissions from two electrogenerated chemiluminescence (ECL) systems contained within the same solution, controlled by simple modification of the applied potential. The fundamental bases of the approach are the ability to selectively 'switch on' luminophores at distinct oxidation potentials, and an intriguing observation that the emission from the well-known electrochemiluminescent complex, fac-Ir(ppy)3, (where ppy is 2-phenylpyridinato), can be selectively 'switched-off' at high overpotentials. The dependence of this phenomenon on high concentrations of the co-reactant implicates quenching of the excited [Ir(ppy)3]* state by electron transfer. Rapid spectral scanning during modulation of the applied potential reveals well resolved maxima for mixtures comprising either green and red or green and blue luminophores, illustrating the vast potential of this approach for multiplexed ECL detection.

Characterization of decamethylferrocene and ferrocene in ionic liquids : Argon and vacuum effect on their electrochemical propertiesce

The electrochemistry of decamethylferrocene (DmFc) has been studied in organic solvent systems and proven to be a superior internal reference redox standard to ferrocene (Fc). However, the electrochemical information on this redox couple in ionic liquids is still limited. Therefore, the voltammetric and amperometric behaviour of DmFc was investigated under argon and vacuum conditions in six different ionic liquids and compared to that of Fc under the same experimental conditions. Consequently, the concentration, the heterogeneous electron-transfer rate constant (k0), volatility, and diffusion coefficients (D) of Fc and Fc+, as well as the solubility, k 0, and D values for DmFc and DmFc+ were determined under argon and vacuum conditions by fitting the experimental chronoamperometric and voltammetric data with numerical and digital simulations. The rate of mass transport of ferrocene and decamethylferrocene was observed to decreases between 6-37% by changing the working atmosphere from argon to vacuum. The D Fc/DFc+ ratios are in the range 1.31-2.01 in the different ILs. Importantly, the DDmFc/DDmFc+ ratio is ≈ 1 in 1-methyl-3-butylimidazolium bis(trifluoromethylsulfonyl)amide, 1-methyl-1-butylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate, and 1-methyl-3-ethylimidazolium tris(pentafluoroethyl)trifluorophosphate. The experimental mid-point potential and half-wave potential of Fc0/+ vs. DmFc0/+, as well as the formal potential obtained after correction for inequality in the respective diffusion coefficients of both redox processes are presented. Even though DmFc is not freely soluble in the different ILs, the results presented in this work suggest that the DmFc0/+ redox process is less dependent than Fc on the IL nature. This is a very relevant finding for the application of this transition-metal sandwich complex as an internal reference redox system in IL solutions. © 2014 Elsevier Ltd.

Control of excitation and quenching in multi-colour electrogenerated chemiluminescence systems through choice of co-reactant

We demonstrate a new approach to manipulate the selective emission in mixed electrogenerated chemiluminescence (ECL) systems, where subtle changes in co-reactant properties are exploited to control the relative electron-transfer processes of excitation and quenching. Two closely related tertiary-amine co-reactants, tri-n-propylamine and N,N-diisopropylethylamine, generate remarkably different emission profiles: one provides distinct green and red ECL from [Ir(ppy)3] (ppy=2-phenylpyridinato-C2,N) and a [Ru(bpy)3](2+) (bpy=2,2'-bipyridine) derivative at different applied potentials, whereas the other generates both emissions simultaneously across a wide potential range. These phenomena can be rationalized through the relative exergonicities of electron-transfer quenching of the excited states, in conjunction with the change in concentration of the quenchers over the applied potential range.

The influence of graphene on the electrical communication through organic layers on graphite and gold electrodes

The influence of graphene on the electrical communication through organic layers fabricated on graphite and gold electrodes is investigated. These layers were prepared by in situ reductive adsorption of 4-aminobenzoic acid in the presence of NaNO2 and HCl to have surface bound carboxylic acid functionalities, followed by covalent attachment of 1-aminopyrene via an amide coupling reaction to have surface bound pyrene groups for graphene immobilization via noncovalent π-π stacking interaction. The coverage of the layers created via reductive adsorption on graphite electrodes was found to be much higher than that on gold electrodes. It was revealed that graphene significantly enhances the electrical communication through the layers on graphite electrodes but on gold electrodes the enhancement effect through the layers was only minor. However, when gold electrodes were modified with a self-assembled monolayer (SAM) of propanethiol the subsequent immobilization of graphene resulted in a significant enhancement of the electrical communication. It is also found that immobilization of graphene could affect the electron transfer between the redox probe, pyrene and the underlying electrodes. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to characterize the graphene sheets. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS) were also used to characterize the stepwise modified electrodes. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Improvement of light harvesting and device performance of dye-sensitized solar cells using rod-like nanocrystal TiO2 overlay coating on TiO2 nanoparticle working electrode

Novel TiO2 single crystalline nanorods were synthesized by electrospinning and hydrothermal treatment. The role of the TiO2 nanorods on TiO2 nanoparticle electrode in improvement of light harvesting and photovoltaic properties of dye-sensitized solar cells (DSSCs) was examined. Although the TiO2 nanorods had lower dye loading than TiO2 nanoparticle, they showed higher light utilization behaviour. Electron transfer in TiO2 nanorods received less resistance than that in TiO2 nanoparticle aggregation. By just applying a thin layer of TiO2 nanorods on TiO2 nanoparticle working electrode, the DSSC device light harvesting ability and energy conversion efficiency were improved significantly. The thickness of the nanorod layer in the working electrode played an important role in determining the photovoltaic property of DSSCs. An energy conversion efficiency as high as 6.6% was found on a DSSC device with the working electrode consisting of a 12 μm think TiO2 nanoparticle layer covered with 3 μm thick TiO2 nanorods. The results obtained from this study may benefit further design of highly efficient DSSCs.

Inquisition of Microcystis aeruginosa and Synechocystis nanowires: characterization and modelling

Identification of extracellular conductive pilus-like structures (PLS) i.e. microbial nanowires has spurred great interest among scientists due to their potential applications in the fields of biogeochemistry, bioelectronics, bioremediation etc. Using conductive atomic force microscopy, we identified microbial nanowires in Microcystis aeruginosa PCC 7806 which is an aerobic, photosynthetic microorganism. We also confirmed the earlier finding that Synechocystis sp. PCC 6803 produces microbial nanowires. In contrast to the use of highly instrumented continuous flow reactors for Synechocystis reported earlier, we identified simple and optimum culture conditions which allow increased production of nanowires in both test cyanobacteria. Production of these nanowires in Synechocystis and Microcystis were found to be sensitive to the availability of carbon source and light intensity. These structures seem to be proteinaceous in nature and their diameter was found to be 4.5-7 and 8.5-11 nm in Synechocystis and M. aeruginosa, respectively. Characterization of Synechocystis nanowires by transmission electron microscopy and biochemical techniques confirmed that they are type IV pili (TFP) while nanowires in M. aeruginosa were found to be similar to an unnamed protein (GenBank : CAO90693.1). Modelling studies of the Synechocystis TFP subunit i.e. PilA1 indicated that strategically placed aromatic amino acids may be involved in electron transfer through these nanowires. This study identifies PLS from Microcystis which can act as nanowires and supports the earlier hypothesis that microbial nanowires are widespread in nature and play diverse roles.

Luminescent probes for the bioimaging of small anionic species in vitro and in vivo

The ability to spatiotemporally identify the formation of specific anionic species, or track changes in their concentration inside living systems, is of critical importance in deciphering their exact biological roles and effects. The development of probes (also called bioimaging agents and intracellular sensors) to achieve this goal has become a rapidly growing branch of supramolecular chemistry. In this critical review the challenges specific to the task are identified and for a select range of small anions of environmental and biological relevance (fluoride, chloride, iodide, cyanide, pyrophosphate, bicarbonate, hydrosulphide, peroxynitrite, hypochlorite and hypobromite) a comprehensive overview of the currently available in vitro and in vivo probes is provided.

Rapid domino [3+2] cycloaddition, [4+2] cycloreversion, ring-opening and aromatisation of a fused oxanorbornane substrate

Heating a dioxa-bridged diene with a cyclobutane epoxide for 10 min under microwave conditions (150 °C) gave an unexpected aryloxanorbornane product (20%). This adduct is proposed to occur via a [3+2] dipolar cycloaddition, retro-Diels-Alder reaction, ring-opening and subsequent aromatisation.

The reduction of oxygen on iron(II) oxide/poly(3,4-ethylenedioxythiophene) composite thin film electrodes

© 2014 Elsevier Ltd. All rights reserved. Conducting polymers (CPs) are currently being investigated for use in many applications owing to their abilities to catalyze a wide range of electrochemical reactions and act as an effective electrode support for various inorganic and organic electrocatalyst materials. Here, we have found that the deposition of poly(3,4-ethylenedioxythiophene) (PEDOT) through the use of an established base-inhibited chemical vapor-phase polymerization (VPP) procedure using an iron(III) tosylate oxidant results in the co-deposition of electrocatalytic iron(II) oxide species within the film. The presence of these species accounts for the 2-electron reduction of hydrogen peroxide that occurs on these electrodes during the series 4-electron oxygen reduction reaction. Furthermore, this realization leads to the possibility of fabricating thin film inorganic/CP composites of various compositions through careful choice of oxidant in a facile, one-step process. A combination of in situ Raman (487.77 nm laser) and in situ UV-Vis spectroscopy was used to probe the oxidation state of PEDOT in the thin film composite electrodes while reducing oxygen in alkaline conditions. These measurements show that the 2-electron electroreduction of hydrogen peroxide (or HO2 -) occurs only on the iron(II) oxide species in a reaction that is facilitated by an effective electron transfer from the delocalized electron orbitals of the PEDOT matrix. This approach could potentially be used in situ to monitor the electrocatalyst/electrode interface quality of conducting polymer-supported electrocatalysts.

Progress in nanostructured photoanodes for dye-sensitized solar cells

Solar cells represent a principal energy technology to convert light into electricity. Commercial solar cells are at present predominately produced by single- or multi-crystalline silicon wafers. The main drawback to silicon-based solar cells, however, is high material and manufacturing costs. Dye-sensitized solar cells (DSSCs) have attracted much attention during recent years because of the low production cost and other advantages. The photoanode (working electrode) plays a key role in determining the performance of DSSCs. In particular, nanostructured photoanodes with a large surface area, high electron transfer efficiency, and low electron recombination facilitate to prepare DSSCs with high energy conversion efficiency. In this review article, we summarize recent progress in the development of novel photoanodes for DSSCs. Effect of semiconductor material (e.g. TiO2, ZnO, SnO2, N2O5, and nano carbon), preparation, morphology and structure (e.g. nanoparticles, nanorods, nanofibers, nanotubes, fiber/particle composites, and hierarchical structure) on photovoltaic performance of DSSCs is described. The possibility of replacing silicon-based solar cells with DSSCs is discussed.

Microbial nanowires : an electrifying tale

Electromicrobiology has gained momentum in the last ten years with advances in microbial fuel cells and the discovery of microbial nanowires (MNWs). The list of MNWs producing microorganisms is growing and providing intriguing insights into the presence of such microorganisms in diverse environments and the potential roles MNWs can perform. This review discusses the MNWs produced by different microorganisms, including their structure, composition and role in electron transfer through MNWs. Two hypotheses, metallic-like conductivity and an electron hopping model, have been proposed for electron transfer and we present a current understanding of both these hypotheses. MNWs are not only poised to change the way we see microorganisms but may also impact the fields of bioenergy, biogeochemistry and bioremediation, hence their potential applications in these fields are highlighted here.