Measurement of the deformation and adhesion of solids in contact

Two curved surfaces of molecularly smooth mica are brought into contact under a controlled load, and their deformed shape is measured using optical interference fringes of equal chromatic order. This technique allows exceptionally accurate measurements of surface profiles at separations down to a molecular scale. Contact between the surfaces can be made either adhesive or nonadhesive by suitable choice of the medium between them. Results have been obtained in both cases and compared with the theories of Hertz (nonadhesive contact) and Johnson, Kendall, and Roberts (adhesive contact).

Contact electrification and adhesion between dissimilar materials

Simultaneous measurements of surface force and surface charge demonstrate strong attraction due to the spontaneous transfer of electrical charge from one smooth insulator (mica) to another (silica) as a result of simple, nonsliding contact in dry nitrogen. The measured surface charge densities are 5 to 20 millicoulombs per square meter after contact. The work required to separate the charged surfaces is typically 6 to 9 joules per square meter, comparable to the fracture energies of ionic-covalent materials. Observation of partial gas discharges when the surfaces are approximately 1 micrometer apart gives valuable insight into the charge separation processes underlying static electrical phenomena in general.

Measuring the adhesion force on natural fibre surface using scanning probe microscopy

This work has focused on measuring the adhesion forces on both untreated and atmospheric helium plasma treated single jute fibre surfaces using scanning probe microscopy (SPM). The measurements were conducted on three differently aged surfaces for one week, three weeks and six weeks using a standard silicon nitride tip in force-volume (f-v) mode. Up to 256 adhesion data points were collected from various locations on the surface of the studied fibres using in-house developed software and the resulting data were statistically analysed by the histogram method. Results obtained from this analysis method were found to be very consistent with a small statistical variation. The work of adhesion, Wa, was calculated from measured adhesion force using the Johnson–Kendall–Roberts (JKR) and Derjaguin–Muller–Toporov (DMT) models. Increases in both adhesion force and work of adhesion were observed on jute fibre with certain levels of atmospheric plasma treatment and ageing time.

Target-specific delivery of doxorubicin to retinoblastoma using epithelial cell adhesion molecule aptamer

PURPOSE: To study target-specific delivery of doxorubicin (Dox) using an RNA aptamer against epithelial cell adhesion molecule (EpCAM) in retinoblastoma (RB) cells. METHODS: The binding affinity of the EpCAM aptamer to RB primary tumor cells, Y79 and WERI-Rb1 cells, and Müller glial cell lines were evaluated with flow cytometry. Formation of physical conjugates of aptamer and Dox was monitored with spectrofluorimetry. Cellular uptake of aptamer-Dox conjugates was monitored through fluorescent microscopy. Drug efficacy was monitored with cell proliferation assay. RESULTS: The EpCAM aptamer (EpDT3) but not the scrambled aptamer (Scr-EpDT3) bound to RB tumor cells, the Y79 and WERI-Rb1 cells. However, the EpCAM aptamer and the scrambled aptamer did not bind to the noncancerous Müller glial cells. The chimeric EpCAM aptamer Dox conjugate (EpDT3-Dox) and the scrambled aptamer Dox conjugate (Scr-EpDT3-Dox) were synthesized and tested on the Y79, WERI-Rb1, and Müller glial cells. The targeted uptake of the EpDT3-Dox aptamer caused cytotoxicity in the Y79 and WERI-Rb1 cells but not in the Müller glial cells. There was no significant binding or consequent cytotoxicity by the Scr-EpDT3-Dox in either cell line. The EpCAM aptamer alone did not cause cytotoxicity in either cell line. CONCLUSIONS: The results show that the EpCAM aptamer-Dox conjugate can selectively deliver the drug to the RB cells there by inhibiting cellular proliferation and not to the noncancerous Müller glial cells. As EpCAM is a cancer stem cell marker, this aptamer-based targeted drug delivery will prevent the undesired effects of non-specific drug activity and will kill cancer stem cells precisely in RB.

Study of radio frequency plasma treatment of PVDF film using Ar, O2 and Ar + O2 gases for improved polypyrrole adhesion

Improvement of the binding of polypyrrole with PVDF (polyvinylidene fluoride) thin film using low pressure plasma was studied. The effects of various plasma gases i.e., Ar, O2 and Ar + O2 gases on surface roughness, surface chemistry and hydrophilicity were noted. The topographical change of the PVDF film was observed by means of scanning electron microscopy and chemical changes by X-ray photoelectron spectroscopy, with adhesion of polypyrrole (PPy) by abrasion tests and sheet resistance measurements. Results showed that the increase in roughness and surface functionalization by oxygen functional groups contributed to improved adhesion and Ar + O2 plasma gave better adhesion.

Selection of DNA aptamers against epithelial cell adhesion molecule for cancer cell imaging and circulating tumor cell capture

Epithelial cell adhesion molecule (EpCAM) is overexpressed in most solid cancers and is an ideal antigen for clinical applications in cancer diagnosis, prognosis, imaging, and therapy. Currently, most of the EpCAM-based diagnostic, prognostic, and therapeutic strategies rely on the anti-EpCAM antibody. However, the use of EpCAM antibody is restricted due to its large size and instability. In this study, we have successfully identified DNA aptamers that selectively bind human recombinant EpCAM protein. The aptamers can specifically recognize a number of live human cancer cells derived from breast, colorectal, and gastric cancers that express EpCAM but not bind to EpCAM-negative cells. Among the aptamer sequences identified, a hairpin-structured sequence SYL3 was optimized in length, resulting in aptamer sequence SYL3C. The Kd values of the SYL3C aptamer against breast cancer cell line MDA-MB-231 and gastric cancer cell line Kato III were found to be 38±9 and 67±8 nM, respectively, which are better than that of the full-length SYL3 aptamer. Flow cytometry analysis results indicated that the SYL3C aptamer was able to recognize target cancer cells from mixed cells in cell media. When used to capture cancer cells, up to 63% cancer cell capture efficiency was achieved with about 80% purity. With the advantages of small size, easy synthesis, good stability, high binding affinity, and selectivity, the DNA aptamers reported here against cancer biomarker EpCAM will facilitate the development of novel targeted cancer therapy, cancer cell imaging, and circulating tumor cell detection.

Improvement of polypyrrole coating adhesion by radio frequency plasma

Tariq worked in the area of electronic textiles. He coated polyester fabric and PVDF films with polypyrrole. Plasma treatment was used to improve binding of coatings over the surface. He investigated in detail, the factors responsible for adhesion improvement using XPS, AFM, SEM, contact angle, abrasion tests and conductivity measurements. Different plasma gases, plasma power and plasma modes were investigated to get optimum bonding data. His investigations pointed towards improved surface oxygen functionalization and suitable surface morphology for improved bonding.

Molding micropatterns of elasticity on PEG-based hydrogels to control cell adhesion and migration

We present an innovative and simple, soft UV lithographic method “FIll-Molding In Capillaries” (FIMIC) that combines soft lithography with capillary force driven filling of micro-channels to create smooth hydrogel substrates with a 2D micro-pattern on the surface. The lithographic procedure involves the molding of a polymer; in our case a bulk PEG-based hydrogel, via UV-curing from a microfabricated silicon master. The grooves of the created regular line pattern are consequently filled with a second hydrogel by capillary action. As a result, a smooth surface is obtained with a well-defined pattern design of the two different polymers on its surface. The FIMIC method is very versatile; the only prerequisite is that the second material is liquid before curing in order to enable the filling process. In this specific case we present the proof of principle of this method by applying two hydrogels which differ in their crosslinking density and therefore in their elasticity. Preliminary cell culture studies on the fabricated elasticity patterned hydrogels indicate the preferred adhesion of the cells to the stiffer regions of the substrates, which implies that the novel substrates are a very useful platform for systematic cell migration studies, e.g. more fundamental investigation of the concept of “durotaxis”