Effect of sintering temperature on electrochemical performance of LiFe0·4Mn0·6PO4/C cathode materials

Carbon coated LiFe0·4Mn0·6PO4 (LiFe0·4Mn0·6PO4/C) was synthesised using high energy ball milling and annealing processes. The starting materials of Li2C2O4, FeC2O4.2H2O, MnC2O4.2H2O, NH4H2PO4 were firstly milled for 40 h, and followed by further milling for 5 h after adding glucose solution. The milled sample was heated at different temperatures (550, 600, 650 and 700°C) for 10 h to produce LiFe0·4Mn0·6PO4/C composites. The structure and morphology of the samples were investigated using X-ray diffraction, field emission scanning electron microscopy, and high resolution electron microscopy. The phase of samples annealed at 550 and 600°C mainly consists of olivine type LiFePO4, but a small amount of Fe2P impurity phase is formed in the samples annealed at 650 and 700°C. Electrochemical analysis results show that LiFe0·4Mn0·6PO4/C synthesised at 600°C exhibits the best performance with the initial discharge capacity of 128 mAh g-1 at 0·1 C, and 109 mAh g-1 at 1 C after 500 cycles. The LiFe0·4Mn0·6PO4/C exhibits excellent electrochemical properties for high energy density lithium ion batteries.

Facile fabrication of polyester filament fabric with highly and durable hydrophilic surface by microwave-assisted glycolysis

Poly(ethylene terephthalate) (PET) fabric with highly and durable hydrophilic surface was fabricated using microwave-assisted glycolysis. Sodium hydroxide (NaOH) as a catalyst was proven to be suitable for PET glycolysis under assistance of microwave. The modified PET fabric (0.5% NaOH, irradiation 120 s) showed high surface hydrophilicity with a contact angle of 17.4 ° and a wicking length of 19.36 mm. The exposure of the carboxyl- and hydroxyl-end groups on the surface of PET and the introduction of etches were confirmed by Methylene Blue staining and field emission scanning electron microscopy (FESEM), receptively. Although the strength of PET fabric decreased after modification, it was still high enough for textile applications. The thermal properties of the modified PET fabrics were well maintained. The high hydrophilicity and its original properties of PET could be controlled by changing the irradiation time from 60 s to 120 s and adjusting the content of sodium hydroxide from 0.2% to 0.5%. These results suggest microwave-assisted glycolysis with sodium hydroxide is an effective method for PET hydrophilic finishing.

Surface analysis of aluminium by glow-discharge optical emission spectrometry

Surface engineering in solids has become an important field in materials science. Glow-discharge optical emission spectrometry (GD-OES) has proven to be a powerful tool for the rapid analysis of elements in the surface of solids. One may employ GD-OES to determine quantitatively the bulk concentration of elements in a sample, and elemental concentrations as a function of depth. Presented here is an overview of GD-OES analysis and an application to aluminium.