MSP119 miniproteins can serve as targets for invasion inhibitory antibodies in plasmodium falciparum provided they contain the correct domains for cell surface trafficking.

Antibodies from malaria-exposed individuals can agglutinate merozoites released from Plasmodium schizonts, thereby preventing them from invading new erythrocytes. Merozoite coat proteins attached to the plasma membrane are major targets for host antibodies and are therefore considered important malaria vaccine candidates. Prominent among these is the abundant glycosylphosphatidylinositol (GPI)-anchored merozoite surface protein 1 (MSP1) and particularly its C-terminal fragment (MSP1(19)) comprised of two epidermal growth factor (EGF)-like modules. In this paper, we revisit the role of agglutination and immunity using transgenic fluorescent marker proteins. We describe expression of heterologous MSP1(19)'miniproteins' on the surface of Plasmodium falciparum merozoites. To correctly express these proteins, we determined that GPI-anchoring and the presence of a signal sequence do not allow default export of proteins from the endoplasmic reticulum to merozoite surface and that extra sequence elements are required. The EGFs are insufficient for correct trafficking unless they are fused to additional residues that normally reside upstream of this fragment. Antibodies specifically targeting the surface-expressed miniprotein can inhibit erythrocyte invasion in vitro despite the presence of endogenous MSP1. Using a line expressing a green fluorescent protein-MSP1 fusion protein, we demonstrate that one mode of inhibition by antibodies targeting the MSP1(19) domain is the rapid agglutinating of merozoites prior to erythrocyte attachment.

Particle trapping using dielectrophoretically patterned carbon nanotubes

This study presents the dielectrophoretic (DEP) assembly of multi-walled carbon nanotubes (MWCNTs) between curved microelectrodes for the purpose of trapping polystyrene microparticles within a microfluidic system. Under normal conditions, polystyrene particles exhibit negative DEP behaviour and are repelled from microelectrodes. Interestingly, the addition of MWCNTs to the system alters this situation in two ways: first, they coat the surface of particles and change their dielectric properties to exhibit positive DEP behaviour; second, the assembled MWCNTs are highly conductive and after the deposition serve as extensions to the microelectrodes. They establish an array of nanoelectrodes that initiates from the edge of microelectrodes and grow along the electric field lines. These nanoelectrodes can effectively trap the MWCNT-coated particles, since they cover a large portion of the microchannel bottom surface and also create a much stronger electric field than the primary microelectrodes as confirmed by our numerical simulations. We will show that the presence of MWCNT significantly changes performance of the system, which is investigated by trapping sample polystyrene particles with plain, COOH and goat anti-mouse IgG surfaces.

The evolution of plumage colouration in parrots : a review

The plumages of parrots provide some of the most striking colouration in nature.We summarise the diversity of mechanisms producing colour in parrots and the current evidence for the adaptive significance of variation in the colour of parrot plumages. Only recently have detailed studies begun to unravel the mechanisms of their colour-production and colour vision systems. Parrots produce much of their plumage colouration through a unique suite of pigments (psittacofulvins), or through a feather tissue nanostructure that results in coherent scattering of light, or a combination of the two (producing green). Psittacofulvins are found nowhere else in nature, and may even generate fluorescence in many parrot species.Compared with other avian taxa, the adaptive significance of parrot plumage colouration remains poorly understood, although some studies suggest that plumage colouration may form important sexual signals and may be used in mate-choice by several species. There is evidence to suggest that parrot colouration can be subject to both environmental and genetic control. We emphasise that parrots offer a distinctive and useful colouration system for further study. Further research is required to unravel how the dramatic colour patterns of parrots evolved, and what roles colour signals may play in the life histories of parrots.

Dielectrophoretically patterned carbon nanotubes to sort microparticles

This article compares the operation of a dielectrophoretic (DEP) platform before and after pattering carbon nanotubes (CNTs) between its microelectrodes. The diverse performance of the DEP system is assessed by separating 1 and 5 μm polystyrene particles. In the absence of CNTs, both particles can only be trapped by operating the system at low medium conductivities, (<10^-3 S/m) and frequencies (<75 kHz). Alternatively, applying CNTs to the system, some CNTs coat the surface of particles and increase their overall conductivity and permittivity, whereas the rest of them are patterned between the microelectrodes and induce strong DEP forces at their free ends, which can effectively trap the coated particles. The first development extends the range of medium conductivities and frequencies at which the trapping of both particles is achievable, whereas the second development facilitates the selective deposition of particles along the surface of curved microelectrodes. Setting the medium conductivity to 2×10^-3 S/m and the frequency to 20 MHz, most of 5 μm particles are trapped at the entry region of the first microelectrode pair, whereas most of 1 μm particles are trapped at the tips, and this distinction facilitates their separation. The trapping of 1 μm particles can be improved by decreasing the frequency to 1.5 MHz. This study demonstrates how the integration of CNTs into microfluidic systems enables them to operate beyond their capabilities.

Novel sphene coatings on Ti–6Al–4V for orthopedic implants using sol–gel method

Hydroxyapatite (HAp) is commonly used to coat titanium alloys (Ti–6Al–4V) for orthopedic implants. However, their poor adhesion strength and insufficient long-term stability limit their application. Novel sphene (CaTiSiO₅) ceramics possess excellent chemical stability and cytocompatibility. The aim of this study is to use the novel sphene ceramics as coatings for Ti–6Al–4V. The sol–gel method was used to produce the coatings and the thermal properties, phase composition, microstructure, thickness, surface roughness and adhesion strength of sphene coatings were analyzed by differential thermal analysis–thermal gravity (DTA–TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), atom force microscopy (AFM) and scratch test, respectively. DTA analysis confirmed that the temperature of the sphene phase formation is 875 °C and XRD analysis indicated pure sphene coatings were obtained. A uniform structure of the sphene coating was found across the Ti–6Al–4V surface, with a thickness and surface roughness of the coating of about 0.5–1 μm and 0.38 μm, respectively. Sphene-coated Ti–6Al–4V possessed a significantly improved adhesion strength compared to that for HAp coating and their chemical stability was evaluated by testing the profile element distribution and the dissolution kinetics of calcium (Ca) ions after soaking the sphene-coated Ti–6Al–4V in Tris–HCl solution. Sphene coatings had a significantly improved chemical stability compared to the HAp coatings. A layer of apatite formed on the sphene-coated Ti–6Al–4V after they were soaked in simulated body fluids (SBF). Our results indicate that sol–gel coating of novel sphene onto Ti–6Al–4V possessed improved adhesion strength and chemical stability, compared to HAp-coated Ti–6Al–4V prepared under the same conditions, suggesting their potential application as coatings for orthopedic implants.

Small seed size increases the potential for dispersal of wetland plants by ducks

1. Long-distance dispersal (LDD) is important in plants of dynamic and ephemeral habitats. For plants of dynamic wetland habitats, waterfowl are generally considered to be important LDD vectors. However, in comparison to the internal (endozoochorous) dispersal of terrestrial plants by birds, endozoochorous dispersal of wetland plants by waterfowl has received little attention. We quantified the capacity for endozoochorous dispersal of wetland plants by waterfowl and identified the mechanisms underlying successful dispersal, by comparing the dispersal capacities of a large number of wetland plant species.

2. We selected 23 common plant species from dynamic wetland habitats and measured their seed characteristics. We fed seeds of all species to mallards (Anas platyrhynchos), a common and highly omnivorous duck species, and quantified seed gut survival, gut passage speed and subsequent germination. We then used a simple model to calculate seed dispersal distances.

3. In total 21 of the 23 species can be dispersed by mallards, with intact seed retrieval and subsequent successful germination of up to 32% of the ingested seeds. The species that pass fastest through the digestive tract of the mallards are retrieved in the greatest numbers (up to 54%) and germinate best (up to 87%). These are the species with the smallest seeds. Seed coat thickness plays only a minor role in determining intact passage through the mallard gut, but determines if ingestion enhances or reduces germination in comparison to control seeds.

4. Model calculations estimate that whereas the largest seeds can hardly be dispersed by mallards, most seeds can be dispersed up to 780 km, and the smallest seeds up to 3000 km, by mallards during migration.

5. Synthesis. This study demonstrates the mechanism underlying successful endozoochorous dispersal of wetland plant seeds by mallards: small seed size promotes rapid, and hence intact and viable, passage through the mallard gut. Mallards can disperse wetland plant seeds of all but the largest-seeded species successfully in relatively large numbers (up to 32% of ingested seeds) over long distances (up to thousands of kilometres) and are therefore important dispersal vectors.

Sunlight exposure caused yellowing and increased mineral content in wool

This study determines how levels of various trace metals in wool and the colour of the fibre change as a result of sunlight exposure and treatment with chelating compounds during wool growth. Twenty-four yearling Merino sheep were clipped on the shoulders and rumps and fitted with sheep coats modified with transparent patches. Patches over the shoulder wool (one per sheep) were either polyethylene (PE) that transmits ultraviolet light or polyvinyl chloride (PVC) that excludes ultraviolet light. The rump wool on each sheep was treated either with a copper chelator treatment (kojic acid or methyl gentisate in aqueous alcohol) or aqueous alcohol only. For 12 of the sheep the rumps were exposed to sunlight through PE patches while rump wool on the other sheep was covered by the sheep coat. Wool was harvested after 11 weeks’ growth with yellowness (Y-Z) and individual mineral contents measured using the same clean wool sample. Sunlight exposure through PE patches caused a mean increase in Y-Z to 9.1 (shoulder) or 9.5–10.1 (rump) from a base level of 7.1–7.2 (shoulder) or 7.0–7.6 (rump) in wool protected by the sheep coat. In contrast, there was no significant change in Y-Z for the PVC patch (shoulder). Therefore, it appears that ultraviolet light damage caused the increased Y-Z. Most of the trace metals analysed increased in the shoulder wool exposed to sunlight but the paired differences for PVC were lower than PE. It appears that changes in fibre caused by sunlight exposure (especially ultraviolet light) facilitate adsorption of minerals from the environment, including the animal’s own suint. Application of the chelating compounds to the rump wool caused pronounced yellowing of the wool with Y-Z increase being most pronounced for kojic acid. Copper levels in the wool were reduced by kojic acid and methyl gentisate while calcium levels were increased by kojic acid and reduced by methyl gentisate. It is not clear from these findings whether minerals and copper in particular contribute to yellowing of wool. However, the different effects of sunlight and chelation on mineral contents in wool shown may well relate to alternative mechanisms of discoloration (i.e. photoyellowing versus bacterial).

The interrelationship between the accumulation of lipids, protein and the level of acyl carrier protein during the development of Brassica napus L. pollen

Lipid accumulation during pollen and tapetal development was studied using cryostat sections of unfixed anthers from Brassica napus (rapeseed). Diamidino-2-henylindole (DAPI), a DNA fluorochrome, was used to stain the pollen nuclei in order to identify ten stages of pollen development in Brassica. Storage lipids (i.e. triacylglycerides) were stained using the fluorochrome Nile red. Pollen coat lipids are formed in tapetal plastids between the mid-vacuolate and early maturation pollen stages. The pollen coat components, including lipids and a proportion of the proteins, are derived from the remnants of the tapetum, after its rupture, during the second pollen mitosis. Quantitative microfluorometric analyses demonstrated four phases of lipid body accumulation or depletion in the developing pollen cytoplasm. The majority of storage lipids found in the cytoplasm of the mature pollen grain accumulated during the late vacuolate and early maturation stages when the pollen is bicellular. The level of acyl carrier protein, a protein integrally involved in lipid synthesis, was also found to be maximal in the developing pollen during the bicellular pollen stages of development. This coincided with the most active period of lipid accumulation. These data could indicate that the lipids of the pollen are synthesized in situ, by metabolic processes regulated by expression of genes in the haploid genome.

Inexplicable inefficiency of avian molt? Insights from an opportunistically breeding arid-zone species, Lichenostomus penicillatus

The majority of bird species studied to date have molt schedules that are not concurrent with other energy demanding life history stages, an outcome assumed to arise from energetic trade-offs. Empirical studies reveal that molt is one of the most energetically demanding and perplexingly inefficient growth processes measured. Furthermore, small birds, which have the highest mass-specific basal metabolic rates (BMR_m), have the highest costs of molt per gram of feathers produced. However, many small passerines, including white-plumed honeyeaters (WPHE; Lichenostomus penicillatus), breed in response to resource availability at any time of year, and do so without interrupting their annual molt. We examined the energetic cost of molt in WPHE by quantifying weekly changes in minimum resting metabolic rate (RMR_min) during a natural-molt period in 7 wild-caught birds. We also measured the energetic cost of feather replacement in a second group of WPHEs that we forced to replace an additional 25% of their plumage at the start of their natural molt period. Energy expenditure during natural molt revealed an energy conversion efficiency of just 6.9% (±0.57) close to values reported for similar-sized birds from more predictable north-temperate environments. Maximum increases in RMR_min during the molt of WPHE, at 82% (±5.59) above individual pre-molt levels, were some of the highest yet reported. Yet RMR_min maxima during molt were not coincident with the peak period of feather replacement in naturally molting or plucked birds. Given the tight relationship between molt efficiency and mass-specific metabolic rate in all species studied to date, regardless of life-history pattern (Efficiency (%) = 35.720•10^-0.494BMRm; r² = 0.944; p =<0.0001), there appears to be concomitant physiological costs entrained in the molt period that is not directly due to feather replacement. Despite these high total expenditures, the protracted molt period of WPHE significantly reduces these added costs on a daily basis.

Blood mineral, trace-element and vitamin concentrations in Huacaya alpacas and Merino sheep grazing the same pasture

We aimed to determine whether the concentration of minerals and trace constituents in blood of Merino sheep and Huacaya alpacas grazing the same pasture differed with species and time of sampling. Blood samples and pasture samples were collected at frequent intervals over a period of 2 years for mineral and trace-nutrient assay. The concentration of the minerals and trace nutrients in the grazed pasture usually met the dietary needs of sheep at maintenance, apart from potassium, sulfur, cobalt and Vitamin E in occasional samples. Restricted maximum likelihood mixed model analysis indicated a significant (P < 0.001) species by month by year interaction for all blood constituents assayed, a significant (P < 0.05) species by coat shade interaction for plasma Vitamin D, E and B12 and a significant (P < 0.001) species by month by Vitamin D interaction for plasma phosphorus concentrations. In general, plasma calcium concentrations were greater in sheep than in alpacas but plasma magnesium concentrations were greater in alpacas than in sheep. There was no consistent difference between the two species in plasma phosphorus concentrations although low values were recorded in individual sheep and alpacas. Plasma Vitamin D concentrations were more responsive to increasing hours of sunlight in alpacas than they were in sheep. Sheep had consistently higher concentrations of plasma copper, zinc and Vitamin B12 and higher concentrations of blood selenium but lower concentrations of plasma selenium and Vitamin A, than did alpacas. No consistent difference was observed between the two species in plasma Vitamin E concentrations.

Production, properties and processing of American bison (Bison bison) wool grown in southern Australia

American bison grow a thick coat of fibres which assists them to withstand severe climatic conditions. Bison fibre was traditionally used in textiles by native North Americans. This study aimed to quantify the production, fibre attributes and dehairing processing of bison fibre produced from bison grazed in north-eastern Victoria. Three age/sex classes were sampled (n = 16) at seven body positions in spring. The fibre growing area was measured. Fibre was tested for diameter distribution, clean washing yield, proportion of fine fibres <36µm and fine fibre length, and processed by cashmere dehairing. Bison were 12 years of age, liveweights 160450 kg and had mean fibre growing area of 1.4 m². They produced an average 1184 g (range 5301640 g) of fine fibre with mean fibre diameter 18.5µm, clean washing yield 76.5%, wax content 9.8%, suint content 14.5%, clean fine fibre yield 56.4%, fine fibre length 37 mm and fibre curvature was 93/mm. Mid-side fibre had a crimp frequency of 6.5/cm and mean resistance to compression of 6.6 kPa. Fibre had a tenacity of 8.7 cN/tex and an extension of 39.3%. Restricted maximum likelihood mixed model analysis showed age/sex class and sampling site significantly affected all fibre attributes. Finer and longer fibre was produced in anterior sites and in younger bison. Fibre curvature declined 5.3°/mm for each 1-µm increase in mean fibre diameter. Dehaired fibre had a mean fibre diameter of 17.8 µm and mid-length of 28 mm, suitable for woollen spinning. The production by bison of coats containing significant amounts of fibre indicates that careful harvesting of fibre could form an important source of income in bison enterprises.

Effects of task lighting on visual function in age-related macular degeneration

The purpose was to investigate the effects of the spectral power distribution (SPD) and illuminance of task lighting on visual function in age-related macular degeneration (ARMD) compared to normal healthy eyes. Twenty-eight subjects with ARMD and 18 age-matched normal subjects were studied. The effects on visual function were determined for four common task light sources: standard pearl coat incandescent (SP), daylight blue incandescent (DL), warm white fluorescent (WW) and cool white fluorescent (CW). Apart from a small, statistically significant improvement in contrast sensitivity with DL compared to SP lighting (0.5 dB, p = 0.01), there were no significant effects of SPD on other visual functions and no differences in the effects for subjects with ARMD and those with normal vision. Thus, for task lighting typically used in low vision rehabilitation, the SPD would seem to be of minimal clinical importance to visual function. However, increasing the task illuminance had a greater effect on visual function, in particular for subjects with ARMD (p < 0.01). For an increase in illuminance from 300 to 3000 lux, the mean increase in contrast sensitivity and near visual acuity was 1.5 dB and 0.13 log MAR, respectively. Although this effect is not large, we suggest that it is clinically relevant and supports the provision of additional task illuminance as an important part of low vision rehabilitation for patients with ARMD.

Objective surface evaluation of fiber reinforced polymer composites

The mechanical properties of advanced composites are essential for their structural performance, but the surface finish on exterior composite panels is of critical importance for customer satisfaction. This paper describes the application of wavelet texture analysis (WTA) to the task of automatically classifying the surface finish properties of two fiber reinforced polymer (FRP) composite construction types (clear resin and gel-coat) into three quality grades. Samples were imaged and wavelet multi-scale decomposition was used to create a visual texture representation of the sample, capturing image features at different scales and orientations. Principal components analysis was used to reduce the dimensionality of the texture feature vector, permitting successful classification of the samples using only the first principal component. This work extends and further validates the feasibility of this approach as the basis for automated non-contact classification of composite surface finish using image analysis.

Riviere

'Riviere' (2012) was created in response to the painting 'Man in a Green Coat' (1998) by Kylie Wren, held in the Deakin University Art Collection. This artistic response was produced for the Face to Face Exhibition held at Deakin University Art Gallery.

Transcriptome analysis of pigeon milk production - role of cornification and triglyceride synthesis genes

BACKGROUND : The pigeon crop is specially adapted to produce milk that is fed to newly hatched young. The process of pigeon milk production begins when the germinal cell layer of the crop rapidly proliferates in response to prolactin, which results in a mass of epithelial cells that are sloughed from the crop and regurgitated to the young. We proposed that the evolution of pigeon milk built upon the ability of avian keratinocytes to accumulate intracellular neutral lipids during the cornification of the epidermis. However, this cornification process in the pigeon crop has not been characterised. RESULTS: We identified the epidermal differentiation complex in the draft pigeon genome scaffold and found that, like the chicken, it contained beta-keratin genes. These beta-keratin genes can be classified, based on sequence similarity, into several clusters including feather, scale and claw keratins. The cornified cells of the pigeon crop express several cornification-associated genes including cornulin, S100-A9 and A16-like, transglutaminase 6-like and the pigeon 'lactating' crop-specific annexin cp35. Beta-keratins play an important role in 'lactating' crop, with several claw and scale keratins up-regulated. Additionally, transglutaminase 5 and differential splice variants of transglutaminase 4 are up-regulated along with S100-A10. CONCLUSIONS: This study of global gene expression in the crop has expanded our knowledge of pigeon milk production, in particular, the mechanism of cornification and lipid production. It is a highly specialised process that utilises the normal keratinocyte cellular processes to produce a targeted nutrient solution for the young at a very high turnover.