Synthesis, characterization and analytical modelling of mechanical behavior of a conducting polymer actuator

Electrochemical synthesis of a tri-layer polypyrrole based actuator optimized for performance was reported. The 0.05 M pyrrole and 0.05 M tetrabutylammonium hexaflurophosphate in propylene carbonate (PC) yielded the optimum performance and stability. The force produced ranged from 0.2 to 0.4mN. Cyclic deflection tests on PC based actuators for 3 hours indicated that the displacement decreased by 60%. PC based actuator had a longer operating time, exceeding 3 hours, compared to acetonitrile based actuators. A triple-layer model of the polymer actuator was developed based on the classic bending beam theory by considering strain electrode material. A tri-layer actuator was fabricated [4, 6], by initially sputter coating a PVDF film with approximately 100nm of gold layer, resulting in a conductive film with a surface resistance of 8-10Ω. The PVDF film was about ~145µm thick had an approximate pore size of 45μm. A solution containing 0.05M distilled pyrrole monomer, 0.05M (TBAPF6) and 1% (w/w) distilled water in PC (propylene carbonate) solution was purged with nitrogen for 15 minutes. The continuity between PPy and PVDF. Results predicted by the model were in good agreement with the experimental data.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Use of ionic liquids for π-conjugated polymer electrochemical devices

π-Conjugated polymers that are electrochemically cycled in ionic liquids have enhanced lifetimes without failure (up to 1 million cycles) and fast cycle switching speeds (100 ms). We report results for electrochemical mechanical actuators, electrochromic windows, and numeric displays made from three types of π-conjugated polymers: polyaniline, polypyrrole, and polythiophene. Experiments were performed under ambient conditions, yet the polymers showed negligible loss in electroactivity. These performance advantages were obtained by using environmentally stable, room-temperature ionic liquids composed of 1-butyl-3-methyl imidazolium cations together with anions such as tetrafluoroborate or hexafluorophosphate.

Optimal actuator fault tolerance for static nonlinear systems based on minimum output velocity jump

Fault tolerance for a class of non linear systems is addressed based on the velocity of their output variables. This paper presents a mapping to minimize the possible jump of the velocity of the output, due to the actuator failure. The failure of the actuator is assumed as actuator lock. The mapping is derived and it provides the proper input commands for the healthy actuators of the system to tolerate the effect of the faulty actuator on the output of the system. The introduced mapping works as an optimal input reconfiguration for fault recovery, which provides a minimum velocity jump suitable for static nonlinear systems. The proposed mapping is validated through different case studies and a complementary simulation. In the case studies and the simulation, the mapping provides the commands to compensate the effect of different faults within the joints of a robotic manipulator. The new commands and the compare between the velocity of the output variables for the health and faulty system are presented.

Method and apparatus for haptic control

The present invention provides remote interfacing utilising haptic technology. In a first aspect there is provided a haptic grasping interface comprising a plurality of finger interaction points, with actuators connected at one end to an actuator control mechanism. The mechanism is mounted remotely from the grasping interface, inverse to the finger interaction points, for manipulation of these points. The grasping points comprise pulleys which route the actuators through a cable tension and transmission system. A second aspect provides haptic augmentation to an operator, which indicates to the operator the state of a control input to a controlled device. A third aspect provides a means of simulating motion where haptic feedback is provided to a user in correspondence with the movement of the user within a pod environment.

Debond detection in RC structures using piezoelectric materials

This paper presents a technique to detect the delamination between the steel bars and concrete in the reinforced concrete structures. The piezoelectric components are mounted on reinforcing bars that are embedded in RC structures as sensors and actuators to generate and record the signal, which is sensitive to the delamination between the steel bars and concrete. The experimental study is carried out on a concrete slab with different debonds between the rebars and concrete. The test results show that the delamination between the rebars and concrete can be detected with the embedded piezoelectric sensors and actuators.

A family of planar parallel manipulators

A family of planar parallel manipulators is investigated and some novel members are proposed. The common feature of the studied manipulators is that the rotation axes of the actuated arms coincide. This feature makes it possible to rotate the whole arm system an infinite number of revolutions around the center of the manipulator. The result is a large workspace in relation to the footprint. Both 2- and 3-DOF variants are presented and the suitability of this family of manipulators for kinematic analysis is demonstrated. Thus, different methods to find optimal manipulability with respect to platform positioning and rotation have been analyzed.

Active surface shaping for artificial skins

Artificial skins exhibit different mechanical properties in compare to natural skins. This drawback makes physical interaction with artificial skins to be different from natural skin. Increasing the performance of the artificial skins for robotic hands and medical applications is addressed in the present paper. The idea is to add active controls within artificial skins in order to improve their dynamic or static behaviors. This directly results into more interactivity of the artificial skins. To achieve this goal, a piece-wise linear anisotropic model for artificial skins is derived. Then a model of matrix of capacitive MEMS actuators for the control purpose is coupled with the model of artificial skin. Next an active surface shaping control is applied through the control of the capacitive MEMS actuators which shapes the skin with zero error and in a desired time. A simulation study is presented to validate the idea of using MEMS actuator for active artificial skins. In the simulation, we actively control 128 capacitive micro actuators for an artificial fingertip. The fingertip provides the required shape in a required time which means the dynamics of the skin is improved.

Multiple actuator fault tolerance for static nonlinear systems based on minimum velocity jump

Static nonlinear systems are common when the model of the kinematics of mechanical or civil structures is analyzed for instance kinematics of robotic manipulators. This paper addresses the maximum effort toward fault tolerance for any number of the locked actuators failures in static nonlinear systems. It optimally reconfigures the inputs via a mapping that maximally accommodates the failures. The mapping maps the failures to an extra action of healthy actuators that results to a minimum jump for the velocity of the output variables. Then from this mapping, the minimum jump of the velocity of the output is calculated. The conditions for a zero velocity jump of the output variables are discussed. This shows that, when the conditions of fault tolerance are maintained, the proposed framework is capable of fault recovery not only at fault instances but also at the whole output trajectory. The proposed mapping is validated by three case studies.

A new way to nanostructure hydrogels : electrospun thermo-responsive islands-in-the-sea nanofibres

Islands-in-the-sea nanofibres are a very interesting system: one polymer (islands) is distributed in fibrillar domains within a second polymer (sea). This fibre geometry is often used in microfiber technologies to obtain very fine fibers, by removing the “sea” polymer. This geometry also allows to combine two polymers with very different properties. In this work this geometry is introduced applied to electrospun hydrogel nanofibers, in a novel fashion, and as a way to improve and stabilize the hydrogel nanofibers. Thermo-responsive islands-in-the-sea nanofibers are here produced by electrospinning solutions of a hydrogel-forming thermo-responsive polymer (crosslinked poly(N-isopropylacrylamide), PNIPAM) and a reinforcing polymer (polyetherketone cardo, PEK-c). The two polymers are thermodynamically incompatible in solution and phase separation takes place, which allows the instant formation of islands-in-the-sea nanofibers upon electrospinning. PNIPAM was then crosslinked post-spinning using an oligomeric silsesquioxane. The formed nanocomposite nanofibers showed intrinsic nanostructure, where the fibril-like PNIPAM domains are intimately adjacent to the strong PEK-c domains. Upon contacting with water, the hydrogel domains became instantly highly swollen, while the PEK-c domains did not. As a result, very wrinkly, swollen fibers were obtained, with increased capillary action, as demonstrated through confocal microscopy. The composite nanofibers in water showed excellent swelling ratios and very fast responses to temperature variations (of the order of 1 second) with morphological and optical effects: variations in fiber-diameter were accompanied by optical transitions: transparent-opaque. The produced hydrogel nanofibers also presented improved mechanical properties (even with small amounts of PEK-c), when compared to their crosslinked-PNIPAM-only nanofibers. It will be also shown how these materials can be used as optical actuators and smart hydrogel platforms with tuneable contact angle and morphology. In brief, this work aims to demonstrate a new platform technology which can be applied to several hydrogel systems, to achieve hydrogel-based composites with new and improved properties, while retaining (and improving) the main properties of the hydrogel. Here this was demonstrated by showing that the composite materials showed thermo-responsiveness, and enhanced transition kinetics.

Editorial : Q & A John A. Endler

John A. Endler is a Professor of Sensory Ecology and Evolution at Deakin University and an Adjunct professor of Zoology at James Cook University, both in Australia. He regards himself as a 19th century natural historian who uses 21st century techniques to answer questions generated originally from field observations. His research is in the area of overlap among Evolutionary Biology, Sensory Ecology, Behavioural Ecology, Animal Behaviour, Neuroethology and Biophysics. He enjoys combining field work, field experiments, lab work, and theoretical methods as well as constructing electromechanical-optical equipment and software for himself and students.

Parallel manipulators with a rotation-symmetric arm system

Parallel manipulators with a rotation-symmetric arm system possess all the typical advantages of parallel robots, such as high acceleration and high-accuracy positioning. Contrary to the majority of proposed parallel manipulators, the rotation-symmetric arm system leads to a large workspace in relation to the footprint of the manipulator. This paper focuses on a subclass of these manipulators with additional favorable qualities, including low inertia and high eigenfrequencies. These qualities are achieved using only 5-DOF lower arm links and by mounting all actuators on the nonmoving base column of the manipulator. The common feature of all previously proposed manipulators in this subclass is identified and several novel 3-DOF and 4-DOF members are introduced.