Photochromic coloration of wool fabric

A method has been developed for producing photochromic wool fabric by applying a layer of hybrid silica containing a photochromic dye onto wool fibres. A number of different hybrid silicas were prepared by the sol-gel technique involving co-hydrolysis and co-condensation of alkyltrialkoxysilanes together with 3-glycidoxypropyltrimethoxysilane. With the dye Photorome II, it was possible to obtain a photo chromic coating which showed fast optical response. The coating had only a slight effect on the fabric handle. The durability of the coating appeared to be acceptable, at least for fashion wear.

Characterization of the moisture absorption and thermal ageing behaviour of polymeric composite systems using Raman spectroscopy

Advanced polymeric materials and their respective composites are fast becoming one of the world's most frequently used engineering materials. They find application in the manufacture of e.g. boat hulls, high performance motor vehicles, aircraft components and sports goods. Their high specific strength and specific stiffness give them the edge in applications where weight savings are critical, but their long-term durability is often questioned. These materials are susceptible to environmental conditions such as temperature and humidity. There is also a lack of relevant data, due to the long time-scales required for testing. In this study, the Raman technique has been used to monitor the degradation of two composite systems, namely: a rubber toughened vinylester material used in the marine industry and a high temperature bismaleimide/carbon fibre aerospace composite. Preliminary Raman studies show that the toughening rubber particles dispersed in the cured vinylester resin are leached out during hygrothermal ageing. The weight gain during ageing suggests that this leaching process occurs concurrently with the absorption of water molecules. An increase in the degree of cross-linking is observed when bismaleimide/carbon fibre composite is aged at high temperature. This cross- linking tendency decreases with increasing depth within the carbon fibre bundle.

Characterization and application of conducting polymer coated textiles

This paper reports on some physical properties of a conducting polymer, polypyrrole, coated textiles. Polypyrrole was coated on textiles chemically through in-situ solution or vapor polymerisation to produce conducting textiles. The effects of the conductive coating on the physical and mechanical properties of the fibrous materials are presented. The coating durability and conductivity of the textiles have also been examined.

Novel conducting polymer films and coated textiles

This research developed non-hazardous methods for coating wool with conductive polymers for thermal and anti-static clothing. Conductive polymers are black in colour, thus the synthesis of new conductive polymers was required to produce coloured or fluorescent conductive textile. Cross-linked conductive polymers were also synthesised to increase their durability.

HIV-1 vaccine development : tackling virus diversity with a multi-envelope cocktail

A major obstacle to the design of a global HIV-1 vaccine is viral diversity. At present, data suggest that a vaccine comprising a single antigen will fail to generate broadly reactive B-cell and T-cell responses able to confer protection against the diverse isolates of HIV-1. While some B-cell and T-cell epitopes lie within the more conserved regions of HIV-1 proteins, many are localized to variable regions and differ from one virus to the next. Neutralizing B-cell responses may vary toward viruses with different i) antibody contact residues and/or ii) protein conformations while T-cell responses may vary toward viruses with different (i) T-cell receptor contact residues and/or (ii) amino acid sequences pertinent to antigen processing. Here we review previous and current strategies for HIV-1 vaccine development. We focus on studies at St. Jude Children's Research Hospital (SJCRH) dedicated to the development of an HIV-1 vaccine cocktail strategy. The SJCRH multi-vectored, multi-envelope vaccine has now been shown to elicit HIV-1-specific B- and T-cell functions with a diversity and durability that may be required to prevent HIV-1 infections in humans.

Long lived multi-isotype anti-HIV antibody responses following a prime-double boost immunization strategy

Despite decades of work, an effective HIV vaccine remains elusive. In an effort to elicit protective immunity, investigators have sought to define vaccines able to elicit durable HIV-specific B-cell and T-cell activities. Additionally, vaccines are sought which can induce antibodies of a variety of isotypes, as each isotype possesses unique attributes in terms of opsonization, Fc receptor binding capacity, complement fixation and location. One prominent new vaccine strategy, applied to numerous distinct antigenic systems is the prime boost-regimen, with DNA, vaccinia virus (VV), and/or purified recombinant protein. To examine the durability, location and isotype distribution of responses induced by prime-boost regimens, we tested successive immunizations with DNA, VV and protein (D-V-P), comparing three forms of protein inoculations: (i) purified protein administered intramuscularly with complete Freunds adjuvant, (ii) purified protein administered intranasally, and (iii) purified protein conjugated to oxidized mannan, administered intranasally. We found that all three protocols elicited serum antibodies of multiple isotypes, with serum IgA being most prominent among mice immunized with mannan-conjugated protein. All D-V-P protocols, regardless of protein form or route, also elicited antibody responses at mucosal surfaces. In bronchoalveolar lavage, a tendency toward IgA production was again most prominent in mice boosted with the protein–mannan conjugate. Both B-cell and T-cell responses were sustained for more than 1 year post-immunization following each form of vaccination. Contemporaneous with long-lasting serum and mucosal antibodies were antibody forming cells in the bone marrow of primed animals. Results highlight the D-V-P vaccination strategy as a promising approach for attaining durable, multi-isotype B-cell and T-cell activities toward HIV.

A potential novel rapid screening NMR approach to boundary film formation at solid interfaces in contact with ionic liquids

The boundary films generated on a series of inorganic compounds, typical of native films on metal and ceramic surfaces, when exposed to various ionic liquids (ILs) based on the trihexyl(tetradecyl)phosphonium cation have been characterized using multinuclear solid-state NMR. The NMR results indicate that SiO₂ and Mg(OH)₂ interact strongly with the anion and cation of each IL through a mechanism of adsorption of the anion and subsequent close proximity of the cation in a surface double layer (as observed through ¹H−²⁹Si cross polarization experiments). In contrast, Al₂O₃, MgO, ZnO, and ZrO₂ appear less active, strongly suggesting the necessity of hydroxylated surface groups in order to enhance the generation of these interfacial films. Using solid-state NMR to characterize such interfaces not only has the potential to elucidate mechanisms of wear resistance and corrosion protection via ILs, but is also likely to allow their rapid screening for such durability applications.

Magnet-induced temporary superhydrophobic coatings from one-pot synthesized hydrophobic magnetic nanoparticles.

In this paper, we report on the production of superhydrophobic coatings on various substrates (e.g., glass slide, silicon wafer, aluminum foil, plastic film, nanofiber mat, textile fabrics) using hydrophobic magnetic nanoparticles and a magnet-assembly technique. Fe3O4 magnetic nanoparticles functionalized with a thin layer of fluoroalkyl silica on the surface were synthesized by one-step coprecipitation of Fe2+/Fe3+ under an alkaline condition in the presence of a fluorinated alkyl silane. Under a magnetic field, the magnetic nanoparticles can be easily deposited on any solid substrate to form a thin superhydrophobic coating with water contact angle as high as 172°, and the surface superhydrophobicity showed very little dependence on the substrate type. The particulate coating showed reasonable durability because of strong aggregation effect of nanoparticles, but the coating layer can be removed (e.g., by ultrasonication) to restore the original surface feature of the substrates. By comparison, the thin particle layer deposited under no magnetic field showed much lower hydrophobicity. The main reason for magnet-induced superhydrophobic surfaces is theformation of nano- and microstructured surface features. Such a magnet-induced temporary superhydrophobic coating may have wide applications in electronic, biomedical, and defense-related areas.

A study on the photostability of photochromic fabrics from hybrid organosilica coatings

Photochromic fabrics were prepared using a coating solution containing photochromic dyes and silica sol-gel. The photochromic effect was rapid. The effect of three different post treatments on the optical and durability of the photochromic fabrics was evaluated. These included incorporating a UV stabilizer, increasing the surface hydrophobicity by fluorinating the pores, and blockading the dye-containing pores with additional silica coating. All the treatments improved photostability, without significantly affecting response/fading speeds.

Antibacterial activity of capsaicin-coated wool fabric

Fabrics made from natural fibers, such as wool and cotton, are susceptible to attacks from micro-organisms, which may damage the fabrics and harm the human body. Antimicrobial finishing of natural textile products may involve harmful and non-environmentally friendly chemicals. In this study, a natural antibacterial agent, capsaicin, was coated on the surface of wool fabrics by a sol-gel process. The antibacterial properties of coated fabrics were evaluated against test bacteria Escherichia coli according to the American Association of Textile Chemists and Colorists (AATCC) method and standard American Society for Testing and Materials (ASTM) E2149-01. Compared with the control group (sol-gel coated fabric without capsaicin), the capsaicin-coated fabric inhibited bacterial growth markedly after 24 hours incubation at 37°C. The antibacterial efficiency after laundry washes was also investigated. Good durability to washing of capsaicin on fabric was achieved by the sol-gel coating technique.

Comparison of advanced waste heat recovery systems with a novel oil heating system

Latest trends in waste heat recovery include systems like Thermo Electric Generation (TEG), Rankine cycle, and active warm up systems. The advantages and disadvantages of different approaches are critically discussed and compared with a novel and effective oil heating system that can deliver between 7% and 12% reductions of CO2 emissions and fuel consumption. The comparison includes the expected CO2 and fuel saving potential related to the legal drive cycle as well as real world driving, effects on regulated exhaust emissions, utilisation of resources, maintenance and service, vehicle performance, comfort, noise, and durability.

Utilizing polypropylene fibers to improve physical and mechanical properties of concrete

The influence of polypropylene fibers has been studied in different proportioning and fiber aspect ratios to improve physical and mechanical properties of fiber-reinforced concretes. Fibers are used in two different lengths (12 mm and 19 mm) and proportions (0.1% and 0.3%) in concrete mixture design. Hardened concrete properties, such as 7- and 28-day compressive strength, splitting tensile strength, flexural strength, water and air absorption, and restrained shrinkage cracking were evaluated.

No statistically significant effects were observed for polypropylene fibers on the compressive strength of concrete, while toughness indexes, splitting tensile and flexural strength and durability parameters showed an increase in the presence of polypropylene fibers. Increased fiber availability (fiber aspect ratio) in the concrete matrix, in addition to the ability of longer polypropylene fibers to bridge on the micro cracks, are suggested as the reasons for the enhancement in mechanical properties. Finally, crack width in fiber-reinforced concrete is calculated analytically with fiber property variables (fiber type, length, diameter and proportion). Results are compared with experimental values and concluded that with an increase in fiber length and/or decrease in fiber diameter crack width, decrease significantly.

A resonance tunable and durable LSPR nano-particle sensor : AL2O3 capped silver nano-disks

Localized surface plasmon resonance (LSPR) biosensors are employed to detect target biomolecules which have particular resonance wavelengths. Accordingly, tunability of the LSPR wavelength is essential in designing LSPR devices. LSPR devices employing silver nano-particles present better efficiencies than those using other noble metals such as gold; however, silver nano-particles are easily oxidized when they come in contact with liquids, which is inevitable in biosensing applications. To attain both durability and tunabilty in a LSPR biosensor, this paper proposes alumina (AL₂O₃) capped silver nano-disks. It is shown that through controlling the thickness of the cap, the LSPR resonance frequency can be finely tuned over a wide range; and moreover, the cap protects silver nano-particles from oxidation and high temperature.

Manufacture of garment materials

Functionalizing a broad range of stretchable substrates, including synthetic and natural fabrics, fibers and non-woven materials, by coating the substrates with various materials while the substrate is held stretched so as to maintain the breathability of the materials. This provides durability to the coatings and prolonged resistance to degradation due to washing and cleaning. One or both sides of the substrate may be treated to have different functional properties. A process is also provided for materials functionalization which can be compatible with the existing equipment.