Rationale for the use of DC microgrids: feasibility, efficiency and protection analysis

Electrical power systems are undergoing highly significant changes in their structures. The emergence of renewable energy units in the power generation sector, the use of high-voltage DC in the power transmission sector, and the prevalence of islanded or integrated microgrids in the distribution sector are the strongest evidence supporting this claim. These changes are mostly the consequences of the increasing energy demand rate, climate change, and environmental challenges, as well as the high investment and maintenance cost of the previous structures. Considering these new conditions and according to the recent development in DC/DC conversion topologies and control techniques, different studies have been conducted on how and why DC microgrids outperform AC microgrids. This study discusses the feasibility of the DC microgrid system according to recent developments in power systems. The efficiency and power loss reduction in DC distribution systems are then analyzed, some of the common strategies and devices for protection systems in such networks are reviewed, and the possible and existing challenges in developing the DC microgrids are highlighted. The mathematical calculations and theories for this evaluation are presented to determine the reliable justification for selecting the appropriate microgrid systems.

Impact analysis study in a typical solar PV microgrid power system

Microgrid (MG) power system with Distributed Generation (DG) plays an important role to provide reliable, secure, and low carbon emission energy supply for communities, in case of any failure or disturbance of energy supply from the main grid. At the same time, DG also contributes to several technical issues in the MG distribution network. Power quality (PQ) issues are one of the main technical challenges when integrating Renewable Energy (RE) sources in MG network. In this paper, the PQ issues like; power variation, voltage deviation, and Total Harmonic Distortion (THD) have been addressed by an impact analysis study on a typical solar PV MG power system in both on-grid and off-grid mode of operation. Analysis results from the study will be helpful in developing an independent MG power system with improved PQ conditions.

Power quality impacts in a typical microgrid

Microgrid (MG) power system plays an important role to fulfill reliable and secure energy supply to critical loads of communities as well as for communities in remote area. Distributed Generation (DG) sources integrated in a MG provides numerous benefits, at the same time leads to power quality issues in the MG power distribution network. Power Quality (PQ) issue arises due to the integration of an intermittent nature of Renewable Energy (RE) sources with advanced Power Electronics (PE) converter technology. Also, presence of non-linear and unbalancing loads in MG seems to affect PQ of the energy supply in power distribution network. In this paper, PQ impacts like; power variation, voltage variation, Total Harmonic Distortion (THD), and Unbalance voltage level have been analysed in Low Voltage (LV) distribution network of typical MG power system model. In this study, development of MG model and PQ impact analysis through simulation has been done in PSS-Sincal software environment. Analysis results from the study can be used as a guideline for developing a real and independent MG power system with improved PQ conditions.

Power quality analysis in microgrid: an experimental approach

Microgrid (MG) integrated with Distributed Generation (DG) provides several benefits like reliable, secure, and high efficient of energy supply, while minimizing power loss, deferring expansion of power distribution infrastructures, and reduced carbon emission of energy supply etc. to the communities. Despite of the several benefits, there are several challenges existing due to the integration of different characteristics and technology of DG sources in MG network. Power Quality (PQ) issue is one of the main technical challenges in MG power system. In order to provide improved PQ of energy supply, it is necessary to analyse and quantify the PQ level in MG network. This paper investigates the detail of PQ impacts in a real MG network carried out through an experimental analysis. Voltage and frequency variations/deviations are analysed in both on-grid and off-grid mode of MG operation at varying generation and varying load conditions. Similarly un-balance voltage and current level in neutral are estimated at unbalanced PV generation and uneven load distribution in MG network. Also current and voltage THD are estimated at different PV power level. Finally the results obtained from the analysis are compared to that of Australian network standard level.

Determining the size of PHEV charging stations powered by commercial grid-integrated PV systems considering reactive power support

Due to low electricity rates at nighttime, home charging for electric vehicles (EVs) is conventionally favored. However, the recent tendency in support of daytime workplace charging that absorbs energy produced by solar photovoltaic (PV) panels appears to be the most promising solution to facilitating higher PV and EV penetration in the power grid. This paper studies optimal sizing of workplace charging stations considering probabilistic reactive power support for plug-in hybrid electric vehicles (PHEVs), which are powered by PV units in medium voltage (MV) commercial networks. In this study, analytical expressions are first presented to estimate the size of charging stations integrated with PV units with an objective of minimizing energy losses. These stations are capable of providing reactive power support to the main grid in addition to charging PHEVs while considering the probability of PV generation. The study is further extended to investigate the impact of time-varying voltage-dependent charging load models on PV penetration. The simulation results obtained on an 18-bus test distribution system show that various charging load models can produce dissimilar levels of PHEV and PV penetration. Particularly, the maximum energy loss and peak load reductions are achieved at 70.17% and 42.95% respectively for the mixed charging load model, where the system accommodates respective PHEV and PV penetration levels of 9.51% and 50%. The results of probabilistic voltage distributions are also thoroughly reported in the paper.

Object oriented finite element analysis: a distributed approach to mesh generation

The object-oriented finite element method (OOFEM) has attracted the attention of many researchers. Compared with the traditional finite element method, OOFEM software has the advantages of maintenance and reuse. Moreover, it is easier to expand the architecture to a distributed one. In this paper, we introduce a distributed architecture of a object-oriented finite element preprocessor. A comparison between the distributed system and the centralised system shows that the former, presented in the paper, greatly improves the performance of mesh generation. Other finite element analysis modules could be expanded according to this architecture.

Building the second generation of parallel/distributed virtual reality systems

We present the RhoVeR (Rhodes Virtual Reality) system and classify it as a second generation parallel/distributed virtual reality (DVR) system. We discuss the components of the system and thereby demonstrate its support for virtual reality application development, its configurable, parallel and distributed nature, and its synthesis of first generation DVR techniques.

An effective VAR planning to improve dynamic voltage profile of distribution networks with distributed wind generation

This paper proposes an effective VAR planning based on reactive power margin for the enhancement of dynamic voltage stability in distribution networks with distributed wind generation. The analysis is carried over a distribution test system representative of the Kumamoto area in Japan. The detailed mathematical modeling of the system is also presented. Firstly, this paper provides simulation results showing the effects of composite load on voltage dynamics in the distribution network through an accurate time-domain analysis. Then, a cost-effective combination of shunt capacitor bank and distribution static synchronous compensator (D-STATCOM) is selected to ensure fast voltage recovery after a sudden disturbance. The analysis shows that the proposed approach can reduce the size of compensating devices, which in turn, reduces the cost. It also reduces power loss of the system.

Voltage profile improvement for distributed wind generation using D-STATCOM

This paper presents the application of FACTS devices for the enhancement of dynamic voltage stability in distribution networks with distributed wind generation. The analysis is carried over a test distribution system representative of the Kumamoto area in Japan. The detailed mathematical modelling of the system is also presented. Firstly, this paper provides simulation results showing the effects of higher and lower penetration of distributed wind generation on the voltage dynamics in a faulted system. Then, a distribution static synchronous compensator (D-STATCOM) is used to improve the voltage profile of the system. This analysis shows that D-STATCOM has significant performance to improve the voltage dynamics of distribution system compared to shunt capacitor.

Automatic generation of meta classifiers with large levels for distributed computing and networking

This paper is devoted to a case study of a new construction of classifiers. These classifiers are called automatically generated multi-level meta classifiers, AGMLMC. The construction combines diverse meta classifiers in a new way to create a unified system. This original construction can be generated automatically producing classifiers with large levels. Different meta classifiers are incorporated as low-level integral parts of another meta classifier at the top level. It is intended for the distributed computing and networking. The AGMLMC classifiers are unified classifiers with many parts that can operate in parallel. This make it easy to adopt them in distributed applications. This paper introduces new construction of classifiers and undertakes an experimental study of their performance. We look at a case study of their effectiveness in the special case of the detection and filtering of phishing emails. This is a possible important application area for such large and distributed classification systems. Our experiments investigate the effectiveness of combining diverse meta classifiers into one AGMLMC classifier in the case study of detection and filtering of phishing emails. The results show that new classifiers with large levels achieved better performance compared to the base classifiers and simple meta classifiers classifiers. This demonstrates that the new technique can be applied to increase the performance if diverse meta classifiers are included in the system.

“The hope – the one hope – is that your generation will prove wiser and more responsible than mine.” Constructions of guilt in a selection of disaster texts for young adults

This paper explores a range of definitions of guilt, and argues that fiction for young adults which is set after a major disaster that has been caused by humans has surprisingly little emphasis on guilt. Focusing on Brother in the Land by Robert Swindells, Nuclear War Diary by James E. Sanford (Jr), The Last Children by Gudrun Pausewang, The Carbon Diaries 2015 by Saci Lloyd and its sequel, The Carbon Diaries 2017, and Days Like This by Alison Stewart, the paper argues that in post-nuclear texts for young adults the emphasis tends to be on the perceived responsibility of the young adult reader's generation to work towards preventing the disaster from becoming reality, rather than on the guilt of the adult generation that caused the disaster. However, in texts dealing with environmental disaster, the young adult reader's generation can be seen to have some measure of culpability, and so the issues of guilt and responsibility become more complex

A novel distributed algorithm for power loss minimizing in Smart Grid

Because power generation of renewable resources are unstable and demands of the customers are time-varying, the supply power and demands of the customers are always unequal. To meet the demands of the customers, power is transmitted from primary power generation to secondary power generation. It will cause high power loss. To solve this problem, a distributed algorithm is proposed in this paper. By using the algorithm, the micro-grids are able to exchange power with their neighbors so as to minimize the total power losses of the smart grid. Moreover, communication overhead (bandwidth) is reduced, comparing with centralized algorithm. Through computer simulations, we demonstrate that the proposed algorithm can lead to near-optimal result for alleviating the average power loss per micro-grid and reduce the communication overhead significantly in contrast with the centralized approach.