The design and implementation of a traffic accident analysis system

We designed and implemented a traffic accident analysis system (TAAS) in the paper. TAAS is the system faced traffic accident analysis, which uses the traffic rules (law) as knowledge sources to judge if the driver is responsible for a traffic accident. TAAS has characteristics of separating knowledge base and inference engine, using production rule and backward chaining. Besides, TAAS used predefined text and tracing program to realize explanation mechanism.

Girls challenging patriarchy through multimodal design and participation in online communities of practice.

This paper examines adolescent girls' multimodal design that challenges/resists patriarchy. Acts of uploading and multimodal design are discussed in terms of Bulter's theorisation of discursive performativity. The author suggests the girls employ a form of 'linguistic agency' or 'discursive agency' that allows them to make use of a wide range of multimodal design practices often unavailable in print dominated middle years classrooms. The girls in the study were involved in a set of relationships over time, both inside and outside of school in virtual and real time communities of practice. As a result, they engaged with particular areas of curricular knowledge differently than boys. The findings suggest that within online communities of practice, new contexts emerge where adolescent girls can contest the discourses of patriarchal power.

Role of multi-tenure reserve networks in improving reserve design and connectivity

Multi-tenure reserve networks aim to connect areas managed for biodiversity conservation across public and private land. This paper seeks to determine to what extent multi-tenure reserve networks improve the reserve design and connectivity of the public protected area estate, using three networks in southeastern Australia as case studies. Network configuration varied considerably and those networks with generally larger parcels tended to be better connected. On average, public land components were larger than private land components in all networks. Two networks had 18 components physically adjoining other network components while another had only 6 components adjoining. Importantly for two of the networks, the average distance between the nearest neighbouring component was significantly less than average distances between public protected areas in the subregion. Thus these multi-tenure reserve networks acted to enhance the existing public protected area estate by increasing the potential linkages in the landscape and therefore the viability of individual public protected areas.

Design and analysis of hull configurations for a low-cost, autonomous underwater robot as an enabling technology for system of system applications

The objective of this research is to model and analyze candidate hull configurations for a low-cost, modular, autonomous underwater robot. As the computational power and speed of microprocessors continue to progress, we are seeing a growth in the research, development, and the utilization of underwater robots. The number of applications is broadening in the R&D and science communities, especially in the area of multiple, collaborative robots. These underwater collaborative robots represent an instantiation of a System of Systems (SoS). While each new researcher explores a unique application, control method, etc. a new underwater robot vehicle is designed, developed, and deployed. This sometimes leads to one-off designs that are costly. One limit to the wide-scale utilization of underwater robotics is the cost of development. Another limit is the ability to modify the configuration for new applications and evolving requirements. Consequently, we are exploring autonomous underwater vehicle (AUV) hull designs towards the goal of modularity, vehicle dexterity, and minimizing the cost. In our analysis, we have employed 3D solid modeling tools and finite element methods. In this paper we present our initial results and discuss ongoing work.

Design and simulation of an interdigital-chaotic advection micromixer for lab-on-a-chip applications

This paper presents the design and simulation of a novel passive micromixer. The micromixer consists of two inlet tanks, one mixing channel and two outlet channels. In order to maximise the mixing efficiency, the following considerations are made: (i) The inlet tanks are followed by a series of microchannels, in which the flow is split. The microchannels are arranged in an interdigital manner to maximise the contact area between the two flows. (ii) The microchannels attached to the lower inlet tank have an upward slope while those attached to the upper tank have a downward slope. The higher-density flow is fed to the lower inlet tank and gets an upward velocity before entering the mixing channel. (iii) Two triangular barriers are placed within the mixing channel to impose chaotic advection and perturb the less-mixed flow along the top and bottom surfaces of the channel. (iv) Finally, two outlet channels are incorporated to discard the less-mixed flow. Three-dimensional simulations are carried out to evaluate the performance of the micromixer. Simulations are performed in the absence and presence of the gravitational force to analyse the influence of gravity on the micromixer. Mixing efficiencies of greater than 92% are achieved using water and a 1011'density biological solvent as the mixing fluids.

Critical evaluation of cashmere nutrition experiments and suggestions for the design and conduct of successful experiments

Cashmere fibre production is an order of magnitude less than fibre production of Merino sheep or Angora goats and is more difficult to measure. Based on a comparison between cashmere experiments reporting responses to nutrition and those reporting no response, 13 design and management characteristics were identified that are related to the ability of experiments to discriminate among treatments. Methods must be adopted to reduce the variance in cashmere production within treatments, by using sufficient. animals per treatment, having enough replication to provide plenty of degrees of freedom to reduce error terms in analysis, and using pre-experimental cashmere production attributes as co-variants in analysis. It is preferable to use more productive and older goats, and goats that are used to handling, and to the conditions and feed to be used. Nutrition treatments need to produce different live weight growth curves and an appropriate control is needed such as live weight maintenance. As the raw cashmere fleece is composed primarily of hair and other contaminants, careful attention is required to measure, sample and test cashmere. Cashmere growth experiments should start by midsummer and last for at least four and preferably six months. These requirements make it more difficult for many university students to plan, undertake and complete long-term cashmere nutrition experiments without considerable management support.

Method design and validation for the determination of uranium levels in human urine using high-resolution alpha spectrometry

Quantification of uranium in human urine is a valuable technique for assessing occupational and public exposure to uranium. A reliable method has been developed and validated in the ARPANSA Radiochemistry Laboratory by means of standard radiochemical separation and purification techniques and measurement using high-resolution alpha spectrometry. This method can be used to evaluate the levels of naturally occurring ²³⁴U, ²³⁵U and ²³⁸U in urine. Method design and validation is the process of defining an analytical requirement, and then confirming that the method under consideration has performance capabilities consistent with what the application requires. The method was designed to measure levels down to 2 mBq/day of total uranium, corresponding to approximately 1/100th of the annual committed effective dose of 20 mSv. Validation tests were developed to assess selectivity, accuracy, recovery and quantification of uncertainty. The radiochemical recovery of this method was measured using ²³²U tracer. The typical minimum detectable concentration for total uranium for 24-h urine samples is approximately 0.6 mBq/day or 0.019 μg/day.

Design and simulation of an interdigital-chaotic advection micromixer for lab-on-a-chip applications

The paper presents the design and simulation of a novel passive micromixer. The micromixer consists of two inlet tanks, one mixing channel and two outlet channels. In order to maximise the mixing efficiency, the following considerations are made : (i) The inlet tanks are followed by a series of microchannels, in which the flow is split. The microchannels are arranged in an interdigital manner to  maximise the contact area between the two flows. (ii) The microchannels attached to the lower inlet tank have an upward slope while those attached to the upper tank have a downward slope. The higher-density flow is fed to the lower inlet tank and gets an upward velocity before entering the mixing channel. (iii) Two triangular barriers are placed within the mixing channel to impose chaotic advection and perturb the less-mixed flow along the top and bottom surfaces of the channel. (iv) Finally, two outlet channels are incorporated to discard the less-mixed flow. Three-dimensional simulations are carried out to evaluate the performance of the micromixer. Simulations are performed in the absence and presence of the gravitational force to analyse the influence of gravity on the micromixer. Mixing efficiencies of greater than 92 % are achieved using water and a low-density biological solvent as the mixing fluids.

The design and implementation of a biomimetic robot fish

In this paper, a novel design of a biomimetic robot fish is presented. Based on the propulsion and maneuvering mechanisms of real fishes, a tail mechanical structure with cams and connecting rods for fitting carangiform fish body wave is designed, which provides the main propulsion. Two pectoral fins are mounted, and each pectoral fin can flap separately and rotate freely. Coordinating the movements of the tail and pectoral fins, the robot fish can simulate the movements of fishes in water. In order to obtain the necessary environmental information, several kinds of sensors (video, infrared, temperature, pressure and PH value sensors) were mounted. Finally, the realization of the robot fish is presented.

Optimization of alloy design and hot rolling conditions for shape memory in Fe–Mn–Si-based alloys

The effect of composition and hot rolling conditions on the shape memory effect (SME) in the Fe–Mn–Si-based system has been studied to obtain improved shape memory without the need to rely on “training”. It has been found that the texture is not markedly affected by rolling conditions, and texture is therefore not a major factor in explaining variations in SME with processing conditions. Decreasing the pre-deformation temperature to below the Ms was found to have a beneficial effect on shape memory. It was found that the best SME was achieved in an alloy that had Ms just above room temperature, and had been processed by hot rolling followed by recovery annealing. Alloys of different compositions exhibited different optimum rolling temperatures for maximum shape memory performance.