Economic models of preventive dentistry for Australian children and adolescents

Purpose:
To identify economic evaluation models and parameters that could be replicated or adapted to construct a generic model to assess cost-effectiveness of and prioritise a wide range of community-based oral disease prevention programmes in an Australian context.
Methods:
The literature search was conducted using MEDLINE, ERIC, PsycINFO, CINHAL (EBSCOhost), EMBASE (Ovid), CRD, DARE, NHSEED, HTA, all databases in the Cochrane library, Scopus and ScienceDirect databases from their inception to November 2012.
Results:
Thirty-three articles met the criteria for inclusion in this review (7 were Australian studies, 26 articles were international). Existing models focused primarily on dental caries. Periodontal disease, another common oral health problem, was lacking. Among caries prevention studies, there was an absence of clear evidence showing continuous benefits from primary through to permanent dentition and the long-term effects of oral health promotion.
Conclusion:
No generic model was identified from previous studies that could be immediately adopted or adapted for our purposes of simulating and prioritising a diverse range of oral health interventions for Australian children and adolescents. Nevertheless, data sources specified in the existing Australian-based models will be useful for developing a generic model for such purposes.

A preventative approach to oral health for children in a regional/rural community in south-west Victoria Australia

Abstract Dental caries is a major health problem in most industrialised countries. Childhood dental disease can cause acute pain, difficulty eating resulting in reduced self-esteem and sleep deprivation. The treatment of oral disease using traditional methods is costly and in industrialized countries currently rates the fourth most expensive disease to treat. Dental professionals are currently facing an unfathomable task of how to manage the large burden of consequences associated with caries progression across the world. The Barwon South-West Region of Victoria, Australia is a diverse regional/rural area. Some communities are quite remote. Barwon Health and Colac Area Health Oral Health Services developed an outreach program to improve access to dental services for children. A Minimal Intervention Dentistry approach was incorporated and includes early diagnosis, risk assessment, early detection of mineral loss, non-surgical treatment and preservation of the tooth structure. Kindergartens throughout the region and children in the first year of Primary School are visited by Oral Health Therapists. Teeth are scored according to the International Caries Detection Assessment System and any early 'white spot' lesions identified have fluoride varnish applied. Children receive up to three dental check-ups during the year and given a toothbrush and toothpaste at each visit. Parent engagement sessions are conducted during Visit 2. Examinations and fluoride application take only 3 - 6 minutes for each child, compared with the usual 30 minute appointments in dental clinics. Two virtual chairs have been created as two dental teams visit Kindergartens throughout the Barwon Region, significantly easing pressure at Community dental clinics. The Kinder Wide Smiles program successfully intervened in the oral health of 5,305 children in the region. Most importantly, one of the barriers for children not presenting to static dental clinics for screening has been eliminated.

Audit of gross decay treatment in young children under general anaesthetic

Abstract In Australia, dental caries is one of the most prevalent diseases effecting children. For more severe cases a dental general anaesthetic (GA) is required. A retrospective analysis of clinical records for all patients aged up to 10 years who attended Barwon Health (Geelong, Victoria, Australia) for a dental GA from 2010-2012 was performed. There were 236 separate events in 234 children, with 223 new cases and 11 that had already received a dental GA prior to the study period. The average age of patients at their dental GA procedure was 6.3 ± 2.0 years. Prior to the GA, the average dmft/ DMFT was 8 (6-12) (median, interquartile range). The length of time from referral to GA increased significantly from 166.4 days (SD 108.1), 164.3 days (SD 98.9) to225.4 days (SD 129.5) in 2010, 2011 and 2012, respectively. Follow up review appointments after GA appointment was attended by 10.8%, 37.3% and 36.0% of patients, respectively across the same years. Following the findings of long waiting times for GA procedures for children with severe dental caries, and the low rate of attendance for post-GA reviews, a change in dental process is urgently needed.

An exploration of the views of Australian mothers on promoting child oral health

Background: An important role for parents and caregivers in the prevention of dental caries in children is the early establishment of health promoting behaviours. This study aimed to examine mothers' views on barriers and facilitators to promoting child and family oral health. Methods: Semi-structured interviews were undertaken with a purposive sample of mothers (n = 32) of young children. Inductive thematic analysis was conducted. Results: Parental knowledge and beliefs, past experiences and child behaviour emerged as major influences on children's oral health. Child temperament and parental time pressures were identified as barriers to good oral health with various strategies reported for dealing with uncooperative children at toothbrushing time. Parental oral health knowledge and beliefs emerged as positive influences on child oral health; however, while most mothers were aware of the common causes of dental caries, very few knew of other risk factors such as bedtime feeding. Parents' own oral health experiences were also seen to positively influence child oral health, regardless of whether these were positive or negative experiences. Conclusions: Understanding parental oral health beliefs is essential to overcoming barriers and promoting enablers for good child oral health. Improving child oral health also requires consideration of child behaviour, family influences, and increasing awareness of lesser-known influencing factors.

Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications

Various types of titanium alloys with high strength and low elastic modulus and, at the same time, vanadium and aluminium free have been developed as surgical biomaterials in recent years. Moreover, porous metals are promising hard tissue implants in orthopaedic and dentistry, where they mimic the porous structure and the low elastic modulus of natural bone. In the present study, new biocompatible Ti-based alloy foams with approximate relative densities of 0.4, in which Sn and Nb were added as alloying metals, were synthesised through powder metallurgy method.
The new alloys were prepared by mechanical alloying and subsequently sintered at high temperature using a vacuum furnace. The characteristics and the processability of the ball milled powders and the new porous titanium-based alloys were characterised by X-ray diffraction, optical
microscopy and scanning electron microscopy .The mechanical properties of the new titanium alloys were examined by Vickers microhardness measurements and compression testing.

Computer aided analysis of dental radiographic images

This paper is a result of a fruitful cooperation between the computer science and the dental diagnosis experiences. The study presents a new approach of applying computer algorithms to radiographic images of dental implantation used for bone regeneration. We focus here only on the contribution of the computer assistance to the clinical research as the periodontal therapy is beyond the scope of this paper. The proposed system is based on a pattern recognition approach, directed to recognize density changes in the intra-bony affected areas of patients. It comprises different modules with new algorithms specially designed to treat the patients’ radiographic images more accurately. The system includes digitizing, detecting the complicated region of interest (ROI), defining reference area to correct any projection discrepancy of the follow up images, and finally to extract the distinguishing features of the ROI as a basis for determining the rate of new bone density accumulation. This study is applied to two typical dental cases for a patient who received two different operations. The results are very encouraging and more accurate than traditional techniques reported before.

Wait no more : the use of private dental services by welfare recipients in Australia

Dental services in Australia are available both privately and publicly. However, access to public dental services, like access to public hospital services for non-urgent treatment, is subject to a considerable waiting period. Moreover, access to public dental services is restricted to certain categories of welfare beneficiaries who qualify for a health care card. Because of the waiting time for public treatment, there is a frequent call for more public dental resources. This paper addresses the issue of what the waiting time for public dental services represents. One view largely confirmed by our research is that state governments are using the waiting time as a way of trying to push more and more people into the private sector. We find that more and more health care card holders are using the
private sector for dental services.

Theory of planned behaviour and implementation intentions in dental attendance

The thesis used a model of health behaviour to examine the predictors of dental attendance. Older respondents who had strong intentions, low perceived vulnerability, stable plans to attend, and were influenced by significant others were more likely to have attended the dentist for preventive care in the last 12 months. The portfolio concludes that attachment theory is a useful conceptual framework for enhancing our understanding of the antecedents and consequences of childhood sexual abuse.

Biomimetic porous titanium scaffolds for orthopaedic and dental applications

The development of artificial organs and implants for replacement of injured and diseased hard tissues such as bones, teeth and joints is highly desired in orthopedic surgery. Orthopedic prostheses have shown an enormous success in restoring the function and offering high quality of life to millions of individuals each year. Therefore, it is pertinent for an engineer to set out new approaches to restore the normal function of impaired hard tissues.

Over the last few decades, a large number of metals and applied materials have been developed with significant improvement in various properties in a wide range of medical applications. However, the traditional metallic bone implants are dense and often suffer from the problems of adverse reaction, biomechanical mismatch and lack of adequate space for new bone tissue to grow into the implant. Scientific advancements have been made to fabricate porous scaffolds that mimic the architecture and mechanical properties of natural bone. The porous structure provides necessary framework for the bone cells to grow into the pores and integrate with host tissue, known as osteointegration. The appropriate mechanical properties, in particular, the low elastic modulus mimicking that of bone may minimize or eliminate the stress-shielding problem. Another important approach is to develop biocompatible and corrosion resistant metallic materials to diminish or avoid adverse body reaction. Although numerous types of materials can be involved in this fast developing field, some of them are more widely used in medical applications. Amongst them, titanium and some of its alloys provide many advantages such as excellent biocompatibility, high strength-to-weight ratio, lower elastic modulus, and superior corrosion resistance, required for dental and orthopedic implants. Alloying elements, i.e. Zr, Nb, Ta, Sn, Mo and Si, would lead to superior improvement in properties of titanium for biomedical applications.

New processes have recently been developed to synthesize biomimetic porous titanium scaffolds for bone replacement through powder metallurgy. In particular, the space holder sintering method is capable of adjusting the pore shape, the porosity, and the pore size distribution, notably within the range of 200 to 500 m as required for osteoconductive applications. The present chapter provides a review on the characteristics of porous metal scaffolds used as bone replacement as well as fabrication processes of porous titanium (Ti) scaffolds through a space holder sintering method. Finally, surface modification of the resultant porous Ti scaffolds through a biomimetic chemical technique is reviewed, in order to ensure that the surfaces of the scaffolds fulfill the requirements for biomedical applications.

Enhancing audio-haptic enabled novel dental training platform performance

Existing haptic and non-haptic dental simulators do not eliminate the problem of hand instability while using the haptic devices for training purpose. This paper reports an audio-haptic dental training platform, which uses a Hand Stability System to reduce the effect of nervousness and hand instability for trainee dental students. Maintaining the ease of implementation, application customizability and the cost factor, the proposed platform increases the training efficiency by enhancing the immersive haptic experience with hand stability. This haptic platform includes multiple angle viewing techniques, audio feedback and session recording for after action review. Trials using this preliminary platform reduced the effect of human nervousness and hand instability due to the customized design.

Private Health Insurance Status and Utilisation of Dental Services in Australia

This article focuses on the relationship between private insurance status and dental service utilisation in Australia using data between 1995 and 2001. This article employs joint maximum likelihood to estimate models of time since last dental visit treating private ancillary health insurance (PAHI) as endogenous. The sensitivity of results to the choice between two different but related types of instrumental variables is examined. We find robust evidence in both 1995 and 2001 that individuals with a PAHI policy make significantly more frequent dental consultations relative to those without such coverage. A comparison of the 1995 and 2001 results, however, suggests that there has been an increasing role of PAHI in terms of the frequency of dental consultations over time. This seems intuitive given the trends in the price of unsubsidised private dental consultations. In terms of policy, our results suggest that while government measures to increase private health insurance coverage in Australia have been successful to a significant degree, that success may have come at some cost in terms of socio-economic inequality as the privately insured are provided much better access to care and financial protection.

Marginalisation of dental students in a shared medical and dental education programme

OBJECTIVES: Internationally, there are a number of universities at which medical and dental education programmes share common elements. There are no studies about the experiences of medical and dental students enrolled in different programmes who share significant amounts of learning and teaching. METHODS: Semi-structured interviews and focus groups were conducted with 36 students and staff in a learning programme shared between separate medical and dental faculties. They were transcribed and an iterative process of interpretation and analysis within the theoretical framework of the contact hypothesis and social identity theory was used to group data into themes and sub-themes. RESULTS: Dental students felt 'marginalised' and felt they were treated as 'second-class citizens' by medical students and medical staff in the shared aspects of their programmes. Contextual factors such as the geographical location of the two schools, a medical : dental student ratio of almost 3 : 1, along with organisational factors such as curriculum overload, propagated negative attitudes towards and professional stereotyping of the dental students. Lack of understanding by medical students and faculty of dental professional roles contributed further. CONCLUSIONS: Recommendations for reducing the marginalisation of dental students in this setting include improving communication between faculties and facilitating experiential contact. This might be achieved through initiating a common orientation session, stronger social networks and integrated learning activities, such as interprofessional problem-based learning and shared clinical experiences.