Does dynamic vulcanization induce phase separation?

Immiscible and miscible blends of poly(vinylidene fluoride) (PVDF) and acrylic rubber (ACM) were subjected to dynamic vulcanization to investigate the effect of crosslinking on phase separation. As a result of different processability, mixing torque behavior of miscible and immiscible blends was significantly different from one another. Scanning electron microscopy (SEM) was used to investigate the morphology of the system. After dynamic vulcanization, submicron ACM droplets were observed in the samples near the binodal curve of the system under mixing conditions. Small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) analysis were used to investigate the effect of dynamic vulcanization on the lamellar structure of the system. It was shown that for samples near the boundary of phase separation, increasing the crosslink density led to a decrease in the lamellar long period (L) as a sign of increment of crosslink density induced phase decomposition. Effects of shear rate on the final morphology of the system were investigated by changing the mixing temperature and by comparing the results of dynamic vulcanization at one phase and two phase regions.

Optimisation of the microencapsulation of tuna oil in gelatin-sodium hexametaphosphate using complex coacervation.

The microencapsulation of tuna oil in gelatin-sodium hexametaphosphate (SHMP) using complex coacervation was optimised for the stabilisation of omega-3 oils, for use as a functional food ingredient. Firstly, oil stability was optimised by comparing the accelerated stability of tuna oil in the presence of various commercial antioxidants, using a Rancimat™. Then zeta-potential (mV), turbidity and coacervate yield (%) were measured and optimised for complex coacervation. The highest yield of complex coacervate was obtained at pH 4.7 and at a gelatin to SHMP ratio of 15:1. Multi-core microcapsules were formed when the mixed microencapsulation system was cooled to 5 °C at a rate of 12 °C/h. Crosslinking with transglutaminase followed by freeze drying resulted in a dried powder with an encapsulation efficiency of 99.82% and a payload of 52.56%. Some 98.56% of the oil was successfully microencapsulated and accelerated stability using a Rancimat™ showed stability more than double that of non-encapsulated oil.

Quick and low cost immobilization of proteinases on polyesters: comparison of lactobacilli cell-envelope proteinase and trypsin for protein degradation

Cell-envelope proteinases (CEPs) are a class of proteolytic enzymes produced by lactic acid bacteria and have several industrially relevant applications. However, soluble CEPs are economically unfavorable for such applications due to their poor stability and lack of reusability. In a quest to prepare stable biocatalysts with improved performance, CEP from Lactobacillus delbrueckii subsp. lactis 313 and trypsin (as a model enzyme) were immobilized onto nonwoven polyester fabrics in a three-step protocol including ethylenediamine activation and glutaraldehyde crosslinking. Immobilization gave protein loading yields of 21.9% (CEP) and 67.7% (trypsin) while residual activity yields were 85.6% (CEP) and 4.1% (trypsin). The activity of the immobilized enzymes was dependent on pH, but was retained at elevated temperatures (40-70°C). An increase in Km values was observed for both enzymes after immobilization. After 70 days of storage, the immobilized CEP retained ca. 62% and 96% of initial activity when the samples were stored in a lyophilized form at -20°C or in a buffer at 4°C, respectively. Both immobilized CEP and trypsin were able to hydrolyze proteins such as casein, skimmed milk proteins and bovine serum albumin. This immobilization protocol can be used to prepare immobilized biocatalyst for various protein degradation processes.

Development of drug-loaded chitosan-vanillin nanoparticles and its cytotoxicity against HT-29 cells

Chitosan as a natural polysaccharide derived from chitin of arthropods like shrimp and crab, attracts much interest due to its inherent properties, especially for application in biomedical materials. Presently, biodegradable and biocompatible chitosan nanoparticles are attractive for drug delivery. However, some physicochemical characteristics of chitosan nanoparticles still need to be further improved in practice. In this work, chitosan nanoparticles were produced by crosslinking chitosan with 3-methoxy-4-hydroxybenzaldehyde (vanillin) through a Schiff reaction. Chitosan nanoparticles were 200-250 nm in diameter with smooth surface and were negatively charged with a zeta potential of - 17.4 mV in neutral solution. Efficient drug loading and drug encapsulation were achieved using 5-fluorouracil as a model of hydrophilic drug. Drug release from the nanoparticles was constant and controllable. The in vitro cytotoxicity against HT-29 cells and cellular uptake of the chitosan nanoparticles were evaluated by methyl thiazolyl tetrazolium method, confocal laser scanning microscope and flow cytometer, respectively. The results indicate that the chitosan nanoparticles crosslinked with vanillin are a promising vehicle for the delivery of anticancer drugs.

Electrical conductivity of single walled and multiwalled carbon nanotube containing wool fibers

The main purpose of this study was producing conductive wool fabric applying carbon nanotubes. Raw and oxidized wool samples were treated with carbon nanotubes in the impregnating bath in the presence of citric acid as a crosslinking agent and sodium hypophosphite as a catalyst while sonicating them in the ultrasonic bath. Electrical resistance, washing durability, and color variation of treated samples were assessed. Through SEM images, the surface morphology of treated samples was studied confirming the surface coating through carbon nanotubes. According to the results, the electrical resistance of treated wool with carbon nanotubes reduced substantially. However, the single-walled carbon nanotubes are more useful to increase the conductivity. In addition, the wool color changed into gray after the treatment.

Preparation and characterization of chia seed protein isolate-chia seed gum complex coacervates

Chia seed protein isolate (CPI) and chia seed gum (CSG) were extracted and complex coacervation between these two was studied. The pH and the CPI-to-CSG ratio were optimized to obtain the highest yield of complex coacervates underpinned by zeta potential and turbidity values. CPI-CSG complex coacervates were found to form primarily due to electrostatic interaction and remained stable within a pH range of 2.1-2.9 at ambient temperature. The optimum pH and CPI-to-CSG ratio for complex coacervation was found to be 2.7 and 6:1, respectively. Spray dried complex coacervate particles possessed smoother surface morphology compared to the freeze dried ones. CPI-CSG complex coacervates demonstrated better thermal stability as compared to that of individual CPI and CSG. The crosslinking of these complex coacervates by transglutaminase further improved their thermal stability. Therefore, the crosslinked CPI-CSG complex coacervates will be able to better protect the oxygen and heat sensitive food and pharmaceutical ingredients.

Microencapsulation of flaxseed oil in flaxseed protein and flaxseed gum complex coacervates

Flaxseed oil, a rich source of omega-3 fatty acids, was microencapsulated in a novel matrix formed by complex coacervation between flaxseed protein isolate (FPI) and flaxseed gum (FG). This matrix was crosslinking with glutaraldehyde. Liquid microcapsules with three core (oil)-to-wall ratios (1:2, 1:3 and 1:4) were prepared and spray-dried or freeze-dried to produce powders. The microencapsulation efficiency, surface oil, morphology and oxidative stability of these microcapsules were determined. The spray-dried solid microcapsules had higher oil microencapsulation efficiency, lower surface oil content, smoother surface morphology and higher oxidation stability than the freeze-dried microcapsules. The highest microencapsulation efficiency obtained in spray-dried microcapsules was 87% with a surface oil of 2.78% at core-to-wall ratio 1:4 and oil load 20%. The oxidation stability obtained from spray-dried microcapsules at core-to-wall ratio of 1:4 was nearly double that of the unencapsulated flaxseed oil.