Agent-based smart grid protection and security

The vision of a smart grid is to provide a modern, resilient, and secure electric power grid as it boasts up with a highly reliable and efficient environment through effective use of its information and communication technology (ICT). Generally, the control and operation of a smart grid which integrate the distributed energy resources (DERs) such as, wind power, solar power, energy storage, etc., largely depends on a complex network of computers, softwares, and communication infrastructure superimposed on its physical grid architecture facilitated with the deployment of intelligent decision support system applications. In recent years, multi-agent system (MAS) has been well investigated for wide area power system applications and specially gained a significant attention in smart grid protection and security due to its distributed characteristics. In this chapter, a MAS framework for smart grid protection relay coordination is proposed, which consists of a number of intelligent autonomous agents each of which are embedded with the protection relays. Each agent has its own thread of control that provides it with a capability to operate the circuit breakers (CBs) using the critical clearing time (CCT) information as well as communicate with each other through high speed communication network. Besides physical failure, since smart grid highly depends on communication infrastructure, it is vulnerable to several cyber threats on its information and communication channel. An attacker who has knowledge about a certain smart grid communication framework can easily compromise its appliances and components by corrupting the information which may destabilize a system results a widespread blackout. To mitigate such risk of cyber attacks, a few innovative counter measuring techniques are discussed in this chapter.

Sound the alarm: health and safety risks associated with alarm response for salaried and retained metropolitan firefighters

Responding to an emergency alarm poses a significant risk to firefighters' health and safety, particularly to cardiovascular health, physical and psychological stress, and fatigue. These risks have been largely categorised for salaried firefighters working 'on station'. Less is known about the factors that contribute to these risks for the vast number of non-salaried personnel who serve in retained roles, often deploying from home. The present study investigated the alarm response procedure for Australian metropolitan fire fighters, identifying common and divergent sources of risk for salaried and retained staff. There were significant differences in procedure between the two workgroups and this resulted in differences in risk profile between groups. Sleep and fatigue, actual response to the alarm stimulus, work-life balance and trauma emerged as sources of risk experienced differently by salaried and retained firefighters. Key findings included reports of fatigue in both groups, but particularly in the case of retained firefighters who manage primary employment as well as their retained position. This also translated into a poor sense of work-life balance. Both groups reported light sleep, insufficient sleep or fragmented sleep as a result of alarm response. In the case of salaried firefighters, this was associated with being woken on station when other appliances are called. There were risks from physical and psychological responses to the alarm stimulus, and reports of sleep inertia when driving soon after waking. The findings of this study highlight the common and divergent risks for these workgroups, and could be used in the ongoing management of firefighters' health and safety.

Acoustic and device feature fusion for load recognition

Appliance-specific Load Monitoring (LM) provides a possible solution to the problem of energy conservation which is becoming increasingly challenging, due to growing energy demands within offices and residential spaces. It is essential to perform automatic appliance recognition and monitoring for optimal resource utilization. In this paper, we study the use of non-intrusive LM methods that rely on steady-state appliance signatures for classifying most commonly used office appliances, while demonstrating their limitation in terms of accurately discerning the low-power devices due to overlapping load signatures. We propose a multi-layer decision architecture that makes use of audio features derived from device sounds and fuse it with load signatures acquired from energy meter. For the recognition of device sounds, we perform feature set selection by evaluating the combination of time-domain and FFT-based audio features on the state of the art machine learning algorithms. Further, we demonstrate that our proposed feature set which is a concatenation of device audio feature and load signature significantly improves the device recognition accuracy in comparison to the use of steady-state load signatures only.

The impact of occupant behaviour on residential greenhouse gas emissions reduction

In 2011-12, greenhouse gas emissions from the Australian residential sector were 101.6 Mt and are expected to grow by 38% by 2050. In order to reduce these emissions, much emphasis has been placed on increasing the energy efficiency of buildings and appliances. Occupant behaviour, however, is probably the single most significant factor which determines energy use and emissions. This paper describes research undertaken to rank the most common occupant behaviours, based upon their impact on greenhouse gas emissions associated with residential energy use, in an architect-designed house in Australia. The occupant behaviours investigated were changing: the heating and cooling temperature set points, window openings, external blind use and lighting use. Simulations were carried out using Primero and EnergyPlus software. Based on the simulation results of greenhouse gas emissions, the following ranking of overall influence (from most influential to the least) has been determined: external blind use was one of the most effective measures to reduce emissions. Cooling set point temperature was similarly important with the magnitude of impact depending on the set point e.g. a 2°C increase had an impact comparable to the use of external blinds. The impact of the heating set point temperature was also dependent on the set point and overall slightly lower compared to the cooling set point temperature. Lighting use was the least influential parameter in the context of this study.

"When I saw walking I just kind of took it as wheeling": interpretations of mobility-related items in generic, preference-based health state instruments in the context of spinal cord injury

Background : In health economic analyses, health states are typically valued using instruments with few items per dimension. Due to the generic (and often reductionist) nature of such instruments, certain groups of respondents may experience challenges in describing their health state. This study is concerned with generic, preference-based health state instruments that provide information for decisions about the allocation of resources in health care. Unlike physical measurement instruments, preference-based health state instruments provide health state values that are dependent on how respondents interpret the items. This study investigates how individuals with spinal cord injury (SCI) interpret mobility-related items contained within six preference-based health state instruments.

Methods : Secondary analysis of focus group transcripts originally collected in Vancouver, Canada, explored individuals’ perceptions and interpretations of mobility-related items contained within the 15D, Assessment of Quality of Life 8-dimension (AQoL-8D), EQ-5D-5L, Health Utilities Index (HUI), Quality of Well-Being Scale Self-Administered (QWB-SA), and the 36-item Short Form health survey version 2 (SF-36v2). Ritchie and Spencer’s ‘Framework Approach’ was used to perform thematic analysis that focused on participants’ comments concerning the mobility-related items only.

Results : Fifteen individuals participated in three focus groups (five per focus group). Four themes emerged: wording of mobility (e.g., ‘getting around’ vs ‘walking’), reference to aids and appliances, lack of suitable response options, and reframing of items (e.g., replacing ‘walking’ with ‘wheeling’). These themes reflected item features that respondents perceived as relevant in enabling them to describe their mobility, and response strategies that respondents could use when faced with inaccessible items.

Conclusion : Investigating perceptions to mobility-related items within the context of SCI highlights substantial variation in item interpretation across six preference-based health state instruments. Studying respondents’ interpretations of items can help to understand discrepancies in the health state descriptions and values obtained from different instruments. This line of research warrants closer attention in the health economics and quality of life literature.