Input and output analysis of complex conveyor networks

Material transfer networks are at the heart of critical infrastructure in many modern service and manufacturing industries. This research identified key performance measures, while deriving generalised analysis methodologies, for simulation models. The technology was validated for international airports, and used to determine operational capacity constraints under varied demand conditions.

Geometric and material constraints in parametric modelling : the design to fabrication process

Parametric modelling, commonly used in the automotive and aerospace industries, has recently been adopted in the architecture and construction fields. The ability to design small repeatable components and apply them to a larger governing surface geometry is one area of parametric modelling that has great design potential. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. This paper reports on the design to fabrication process using repeatable components over a governing or carrier surface. The paper reports on our study of the requirements and possible solutions for successfully controlling a repeatable element, known as a Representative Volumetric Element (RVE), using geometric parameters of a larger governing surface geometry and material properties. This modelling process, coupled with Rapid
Manufacturing (RM) and Computer Numerically Controlled (CNC) machines has the potential to significantly reduce the interface between design and fabrication.

Complexity and learning behaviours in product innovation

Successful product innovation and the ability of companies to continuously improve their innovation processes are rapidly becoming essential requirements for competitive advantage and long-term growth in both manufacturing and service industries. It is now recognized that companies must develop innovation capabilities across all stages of the product development, manufacture, and distribution cycle. These Continuous Product Innovation (CPI) capabilities are closely associated with a company’s knowledge management systems and processes. Companies must develop mechanisms to continuously improve these capabilities over time.  Using results of an international survey on CPI practices, sets of companies are identified by similarities in specific contingencies related to their complexity of product, process, technological, and customer interface. Differences between the learning behaviors found present in the company groups and in the levers used to develop and support these behaviors are identified and discussed. This paper also discusses appropriate mechanisms for firms with similar complexities, and some approaches they can use to improve their organizational learning and product innovation.

A factor-augmented VAR approach : the effect of a rise in the US personal income tax rate on the US and Canada

In this paper a factor-augmented vector autoregressive (FAVAR) model is estimated to characterize the dynamic effects of shocks in the personal income tax rate in the United States on United States and Canadian economies. The representation and the estimate of the FAVAR model is based on Stock and Watson (2005) and the shocks are recovered applying the identification scheme proposed by Bernanke et al. (2005); this method allows impulse response functions to be generated for all the variables in the dataset and provides a description of the domestic and international transmission mechanisms of United States movements in the personal income tax rate. A distinguishing feature of our model is the disaggregation of traded goods sector where imports and exports are disaggregated into 12 and 13 industries, respectively. This provides extra information on the domestic and international transmission mechanism across the two countries. The results show that the FAVAR approach generates a reasonable characterisation of the effects of United States movements in the US personal income tax rate on the United States economy and its transmission to the Canadian economy.

Staying healthy : the case of cotton and cane growers in Australia

Farmers and fishers have always been exposed to the vagaries of climate and global economic forces. However, in recent years there has been an accumulation of factors which are having a particularly severe impact upon rural Australia. The global financial crisis has negatively affected commodity prices and the viability of some rural communities is under threat. There is evidence to suggest that climate change is already impacting adversely on many primary producers and their ability to farm using traditional methods. Furthermore, many parts of rural Australia are still experiencing the effects of long-term drought and associated problems. Together, these circumstances can rightly be conceived of as 'difficult times'. Key areas recently identified in a decline in mental health among farmers include: increasing isolation, ongoing drought, increased government regulations, and a widening of the schism between urban and rural Australians. While there is a body of literature on behaviour around illness in the context of the stress of ' difficult times', there is little on preventative behaviours in these circumstances. This chapter reports preliminary findings from an exploratory research projects that investigates the process by which farmers and fishers achieve and maintain good physical and mental health in the context of 'difficult times'. The research takes a multiple case study approach, with five Australian sites, each with a different industry base, representing communities undergoing 'difficult times'. This chapter focuses on two of the sites and data obtained from interviews with farmers in the cotton and sugar industries. It discusses the behavioural choices that they make to maintain good physical health and mental wellbeing. These include choices about nutrition, physical activity, social connections such as participation in community, social or farm-related groups, opportunities for relaxation and regular medical check-ups.

Machinability assessment and surface integrity characteristics of Austempered Ductile Iron (ADI) using ultra-hard cutting tools

The application of austempered ductile iron (ADI) is gaining an ever greater share of the worldwide ferrous product market, specifically centering on the aerospace, automotive and shipping industries. ADI is a heat treated cast iron, which exhibits remarkable mechanical properties and provides an attractive material for designers and engineers to displace conventional materials. Previous attempts, however, to machine ADI using carbide or ceramic cutting tools produced poor tool life characteristics due to the relatively poor machinability of the workpiece. This paper presents a research study that has applied the advanced technology of modern ultrahard cutting tools, in an attempt to achieve enhanced machinability performance. This performance was evaluated through the analysis of cutting forces, tool wear, surface finish and roundness.

Hindi cinema and its other

 Wider understandings of popular, commercial Hindi (Indian) cinema centre on discourses surrounding the ‘Bollywood’ machine. In these discussions, a critical exploration of Adivasi (Indigenous) representation in Hindi cinema is often left unexplored. Popular Hindi cinema as a World Cinema exerts tremendous influence in India, and indeed South Asia. However, it continues to provide essentialist representations of Adivasi communities in India. This paper discusses some of these representations in commercial Hindi cinema, by looking at examples of film texts with Adivasi characters. It also examines the difficulties involved in cinematic representations which are blind to multiple identities within the nation-state, in this case, how Adivasis are constructed within popular Hindi cinema as the ‘Other’, to an already existing ‘Other’ subaltern (Indian) mass.
This paper additionally explores some examples of how, rather than be ‘swamped’ by Hindi film’s cultural dominance, local audiences, particularly in Adivasi communities, are negotiating with it to their advantage. It is in these peripheral and under-represented communities, that local media traditions are blending with popular Hindi cinema to produce creative results. How such results are re-invigorating the Adivasi film and music industries is examined.

Raat Ki Rani : nightclubs, vamps and urban transgressive spaces in Hindi cinema

This paper considers how city spaces in Hindi cinema have repeatedly been viewed as sites of transgressive sexual experience, particularly via representations of female sexuality in nightclubs and the flagrant performances of the women or ‘vamps’ that inhabit them. Emerging in Hindi cinema in the 1950s, and becoming a staple in films of the 1960s and 1970s, the ‘vamp’ became synonymous with unrestrained sexuality and the immorality of the city. The dichotomy between the idealised, bucolic, timeless village and the city as an icon of degenerate modernity was repeatedly seen in Hindi cinema, and the strongest signifier of this urban immorality was the ‘vamp’ who was seen as an outsider, and connoted urban vice, excess and desire. By and large the actresses that played ‘vamps’ (such as the blonde haired and blue eyed Helen) were of ‘Western’ appearance. The cabaret and nightclub were thus seen as being ‘Western’ in origin. This paper discusses how this was perhaps a response to colonial and Orientalist stereotyping, where the ‘Indian’ woman and the ‘Western’ woman operated as binary oppositional structures. Such oppositions were clearly present in nightclub dance performances, which were full of meaning to the cinematic audience, who would be able to ‘read’ the seductive, gyrating and explicit movements. This paper decodes examples of the movements in these ‘decadent’ performances, as it was through these movements and performances that the ‘westernised vamp’ became firmly located in urban transgressive spaces, closely tied with national anxiety about the depravity of city spaces.

Integrating agriculture and food policy to achieve sustainable peri-urban fruit and vegetable production in Victoria, Australia

Efforts to increase fruit and vegetable consump­tion are a significant aspect of national approaches to preventive health. However, policy frameworks for increasing fruit and vegetable consumption rarely take an integrated food-systems approach that includes a focus on production. In this policy analysis and commentary we examine fruit and vegetable production in peri-urban areas of Melbourne in Victoria, Australia, and highlight the significance of emerging environmental and eco­nomic pressures on fruit and vegetable production. This examination will be of interest to other locations around the world also experiencing pressure on their peri-urban agriculture. These pressures suggest that the availability and afforda­bility of fruit and vegetable supplies cannot be taken for granted, and that future initiatives to increase fruit and vegetable consumption should include a focus on sustainable production. Threats to production that include environmental pressures, together with the loss and cost of peri-urban agri­cultural land and a cost-price squeeze due to rising input costs and low farm-gate prices, act in combi­nation to threaten the viability of the Victorian fruit and vegetable industries. We pro­pose that policy initiatives to increase fruit and vegetable consumption should include measures to address the pressures facing production, and that the most effective policy responses are likely to be integrated approaches that aim to increase fruit and vegetable availability and affordability through innovative solutions to problems of production and distribu­tion. Some brief examples of potential integrated policy solutions are identified to illu­strate the possibilities and stimulate discussion.

On the edge of the desert : design and planning for Roxby Downs

The design and planning of settlements in arid Australia has long been wrought with difficulties because they are positioned in the extremes of environmental and social contexts. Historically many mining-related settlements in Western Australia (WA), South Australia (SA), Northern Territory (NT) and Queensland have struggled or failed in realising a quality design and plan, but also to sustain a robust and vibrant community who do not wish to escape to mainstream suburbia or simply operate as a fly-in fly-out employer commuter from this suburbia. Places like Mt Isa, Theodore, Moranbah, Broken Hill, Radium Hill, Leigh Creek, Roxby Downs, Paraburdoo, Shay Gap, Karratha are typical of these circumstances.

This paper reviews the design and planning origins of the villages at Olympic Dam, and critiques the future designs embedded in the Olympic Dam Expansion Environmental Impact Statement [EIS] (2009). These villages consist of Olympic dam village ( a fly-in fly-out dong-go containerised community accommodating some 500 workers) and Roxby Downs (a mixed Adelaide-template suburb with temporary village and caravan park insertions accommodation some 4,500 ‘permanent’ residents and some 200 fly-in fly-out ‘workers’). The scenario presented in the EIS is to demolish the former and establish a new village for some 10,000 workers, and expand Roxby Downs from 4,500 to near 20,000 although whether this later figure will occur is unclear but certainly the infrastructure and facilities have to be increased as well as increasing residential accommodation units).

Learning from arid planning and design history and practice : from Woomera to creating the new Roxby Downs communities

The principles and knowledge about arid planning and design have much applicability to contemporary Australian planning discourses because of climate change evidence and policy shifts that sketch a hotter and more unreliable future climate with an emphasis upon a semi-arid environment for Australia. Despite this merit and intent, we appear to have learnt little from the past and are failing to draw upon the pioneering planning and design knowledge that underpinned community development and scaffolding in numerous Australian arid and semi-arid communities, and to bring this knowledge into our future planning processes and strategies.

This paper considers the essential attributes and variables of three Australian arid planning and design, drawing upon historical practice and research that have been explored in the planning of semi-arid and arid places including Port Pirie, Whyalla, Monarto, Broken Hill, Port Augusta, Leigh Creek, Andamooka, Olympic Dam Village and Roxby Downs. It specifically reviews Woomera Village (1940s) Shay Gap (1970s) and the proposed extensions to Roxby Downs (2010s) as models of how to better plan and design communities in arid environments. Instrumental in these innovations is the use of landscape-responsive urban design strategies, water harvesting and irregular rainfall capture, arid horticulture, building design, colour and materiality, orientation and shading strategies, and social community construction under difficult isolationist circumstances. The paper points to key strategies that need to be incorporated in future climate change responsive community developments and policy making.

Australian cultural and innovation policies: never the twain shall meet?

 In recent years, Australian cultural policy-makers have begun to pay more attention to innovation policy. Several of the Australian states specifically address issues of innovation in their formal cultural policies, and the Australia Council for the Arts has published an Innovation Strategy which purports to constitute 'a coordinated approach to supporting creativity as one of Australia's most valuable assets' (Australia Council 2006).

However, despite this prima facie policy commitment to supporting and fostering innovation in the arts and cultural industries, there remains a disconnect between cultural and innovation policies in Australia. On the one hand, cultural policies in Australia are confused and incoherent in their approach to cultural innovation, and many policy settings as they apply to cultural industries are antithetical to the aims of fostering innovation and R&D. Meanwhile, innovation policies continue to pay only marginal attention to the creative arts and cultural industries. This disconnect will be briefly examined in three fields of cultural policy: arts and cultural funding; copyright and intellectual property policy; and broadcast media policy.

It is argued that rather than promoting innovation, existing policy frameworks in all three areas, when not specifically framed around the protection of vested interests, are often contradictory and inimical to the disruptive influence of innovative artists, technologies and firms. Possible reasons for the disconnect include pragmatic matters of busy ministers and low policy priorities, and conceptual confusion over the status and value of culture.