Relationship between membrane fatty acids and cognitive symptoms and information processing in individuals at ultra-high risk for psychosis

Cognitive symptoms and impairment are central to schizophrenia and often an early sign of this condition. The present study investigated biological correlates of cognitive symptoms and performance in individuals at ultra-high risk (UHR) for psychosis. The study sample comprised 80 neuroleptic-naïve UHR individuals aged 13-25 years. Associations among erythrocyte membrane fatty acid levels, measured by gas chromatography, and cognitive functioning were investigated in UHR patients. Subjects were divided into terciles based on their scores on the cognitive factor of the Positive and Negative Syndrome Scale. The Zahlen-Verbindungs Test (ZVT) (the number-combination test) was also used as a measure of information-processing speed. Exploratory analysis was conducted to investigate the relationship between membrane fatty acid levels with the size of the intracranial area (ICA), a neurodevelopmental measure relevant to schizophrenia, in half of subjects (n=40) using magnetic resonance imaging. The adjusted analysis revealed that omega-9 eicosenoic and erucic acid levels were significantly higher, but omega-3 docosahexaenoic acid levels were significantly lower, in the cognitively impaired than in the cognitively intact group. We found a significant negative association of eicosenoic, erucic, and gamma-linoleic acids with ZVT scores. A negative association between ICA and membrane levels of eicosenoic acid was also found. This is the first study to demonstrate the relationship between membrane fatty acids and cognitive function in neuroleptic-naïve subjects at UHR for psychosis. The study findings indicate that abnormalities in membrane fatty acids may be associated with the neurodevelopmental disruption associated with the cognitive impairments of individuals at UHR for psychosis.

Predictors of treatment response in young people at ultra-high risk for psychosis who received long-chain omega-3 fatty acids.

Previous efforts in the prospective evaluation of individuals who experience attenuated psychotic symptoms have attempted to isolate mechanisms underlying the onset of full-threshold psychotic illness. In contrast, there has been little research investigating specific predictors of positive outcomes. In this study, we sought to determine biological and clinical factors associated with treatment response, here indexed by functional improvement in a pre-post examination of a 12-week randomized controlled intervention in individuals at ultra-high risk (UHR) for psychosis. Participants received either long-chain omega-3 (ω-3) polyunsaturated fatty acids (PUFAs) or placebo. To allow the determination of factors specifically relevant to each intervention, and to be able to contrast them, both treatment groups were investigated in parallel. Univariate linear regression analysis indicated that higher levels of erythrocyte membrane α-linolenic acid (ALA; the parent fatty acid of the ω-3 family) and more severe negative symptoms at baseline predicted subsequent functional improvement in the treatment group, whereas less severe positive symptoms and lower functioning at baseline were predictive in the placebo group. A multivariate machine learning analysis, known as Gaussian Process Classification (GPC), confirmed that baseline fatty acids predicted response to treatment in the ω-3 PUFA group with high levels of sensitivity, specificity and accuracy. In addition, GPC revealed that baseline fatty acids were predictive in the placebo group. In conclusion, our investigation indicates that UHR patients with higher levels of ALA may specifically benefit from ω-3 PUFA supplementation. In addition, multivariate machine learning analysis suggests that fatty acids could potentially be used to inform prognostic evaluations and treatment decisions at the level of the individual. Notably, multiple statistical analyses were conducted in a relatively small sample, limiting the conclusions that can be drawn from what we believe to be a first-of-its-kind study. Additional studies with larger samples are therefore needed to evaluate the generalizability of these findings.

Compressibility of a Ti-based alloy with varying amounts of surfactant prepared by high-energy ball milling

The combined effects of varying amounts of surfactant (ethylene bis-stearamide; EBS) and milling time on the compressibility of ball-milled Ti-10Nb-3Mo (wt.%) alloy were investigated. Ball milling process was performed on the elemental powders with different amounts of EBS (0-3. wt.%) for 5 and 10. h, and the ball-milled powders were consolidated by a uniaxial cold pressing in the range of 500-1100. MPa. Results indicated that the addition of surfactant in ball milling process lead to significant changes in particle packing density. The relative density was higher for powders ball milled with larger amounts of EBS and for the shorter milling time. The compressibility of powders was examined by the compaction equation developed by Panelli and Ambrosio Filho. The densification parameter (A) increased with the increasing amount of EBS, and decreased with increasing milling time.

Synthesis of LiFePO4@carbon nanotube core-shell nanowires with a high-energy efficient method for superior lithium ion battery cathodes

A high-energy efficient method is developed for the synthesis of LiFePO4@CNT core-shell nanowire structures. The method consists of two steps: liquid deposition approach to prepare FePO4@CNT core-shell nanowires and solvothermal lithiation to obtain the LiFePO4@CNT core-shell nanowires at a low temperature. The solution phase method can be easily scaled up for commercial application. The performance of the materials produced by this method is evaluated in Li ion batteries. The one-dimensional LiFePO4@CNT nanowires offer a stable and efficient backbone for electron transport. The LiFePO4@CNT core-shell nanowires exhibit a high capacity of 132.8 mAh g^-1 at a rate of 0.2C, as well as high rate capability (64.4 mAh g^-1 at 20C) for Li ion storage.

Effects of omega-3 PUFA on the vitamin E and glutathione antioxidant defense system in individuals at ultra-high risk of psychosis

BACKGROUND: Oxidative stress and impaired antioxidant defenses are reported in schizophrenia and are associated with disturbed neurodevelopment, brain structural alterations, glutamatergic imbalance, increased negative symptoms, and cognitive impairment. There is evidence that oxidative stress predates the onset of acute psychotic illness. Here, we investigate the effects of omega-3 PUFA on the vitamin E and glutathione antioxidant defense system (AODS). METHOD: In 64 help-seeking UHR-individuals (13-25 years of age), vitamin E levels and glutathione were investigated before and after 12 weeks of treatment with either 1.2g/d omega-3 (PUFA-E) or saturated fatty acids (SFA-E), with each condition also containing 30.4mg/d alpha-tocopherol to ensure absorption without additional oxidative risk. RESULTS: In multivariate tests, the effects on the AODS (alpha-tocopherol, total glutathione) were not significantly different (p=0.13, p=0.11, respectively) between treatment conditions. According to univariate findings, only PUFA-E caused a significant alpha-tocopherol increase, while PUFA-E and SFA-E caused a significant gamma- and delta-tocopherol decrease. Total glutathione (GSHt) was decreased by PUFA-E supplementation. CONCLUSION: Effects of the PUFA-E condition on the vitamin E and glutathione AODS could be mechanisms underlying its clinical effectiveness. In terms of the vitamin E protection system, PUFA-E seems to directly support the antioxidative defense at membrane level. The effect of PUFA-E on GSHt is not yet fully understood, but could reflect antioxidative effects, resulting in decreased demand for glutathione. It is still necessary to further clarify which type of PUFA/antioxidant combination, and in which dose, is effective at each stage of psychotic illness.

Wave exposure as a predictor of benthic habitat distribution on high energy temperate reefs

The new found ability to measure physical attributes of the marine environment at high resolution across broad spatial scales has driven the rapid evolution of benthic habitat mapping as a field in its own right. Improvement of the resolution and ecological validity of seafloor habitat distribution models has, for the most part, paralleled developments in new generations of acoustic survey tools such as multibeam echosounders. While sonar methods have been well demonstrated to provide useful proxies of the relatively static geophysical patterns that reflect distribution of benthic species and assemblages, the spatially and temporally variable influence of hydrodynamic energy on habitat distribution have been less well studied. Here we investigate the role of wave exposure on patterns of distribution of near-shore benthic habitats. A high resolution spectral wave model was developed for a 624 km2 site along Cape Otway, a major coastal feature of western Victoria, Australia. Comparison of habitat classifications implemented using the Random Forests algorithm established that significantly more accurate estimations of habitat distribution were obtained by including a fine-scale numerical wave model, extended to the seabed using linear wave theory, than by using depth and seafloor morphology information alone. Variable importance measures and map interpretation indicated that the spatial variation in wave-induced bottom orbital velocity was most influential in discriminating habitat classes containing the canopy forming kelp Ecklonia radiata, a foundation kelp species that affects biodiversity and ecological functioning on shallow reefs across temperate Australasia. We demonstrate that hydrodynamic models reflecting key environmental drivers on wave-exposed coastlines are important in accurately defining distributions of benthic habitats. This study highlights the suitability of exposure measures for predictive habitat modeling on wave-exposed coastlines and provides a basis for continuing work relating patterns of biological distribution to remotely-sensed patterns of the physical environment.

Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al-Cr alloys produced via high-energy ball milling

This paper presents a hypothesis and its experimental validation that simultaneous improvement in the hardness and corrosion resistance of aluminium can be achieved by the combination of suitable processing route and alloying additions. More specifically, the corrosion resistance and hardness of Al- xCr (x= 0-10 wt.%) alloys as produced via high-energy ball milling were significantly higher than pure Al and AA7075-T651. The improved properties of the Al- xCr alloys were attributed to the Cr addition and high-energy ball milling, which caused nanocrystalline structure, extended solubility of Cr in Al, and uniformly distributed fine intermetallic phases in the Al-Cr matrix.

Niacin skin sensitivity is increased in adolescents at ultra-high risk for psychosis

BACKGROUND: Most studies provide evidence that the skin flush response to nicotinic acid (niacin) stimulation is impaired in schizophrenia. However, only little is known about niacin sensitivity in the ultra-high risk (UHR) phase of psychotic disorders.

METHODS: We compared visual ratings of niacin sensitivity between adolescents at UHR for psychosis according to the one year transition outcome (UHR-T n = 11; UHR-NT n = 55) with healthy controls (HC n = 25) and first episode schizophrenia patients (FEP n = 25) treated with atypical antipsychotics.

RESULTS: Contrary to our hypothesis niacin sensitivity of the entire UHR group was not attenuated, but significantly increased compared to the HC group, whereas no difference could be found between the UHR-T and UHR-NT groups. As expected, niacin sensitivity of FEP was attenuated compared to HC group. In UHR individuals niacin sensitivity was inversely correlated with omega-6 and -9 fatty acids (FA), but positively correlated with phospholipase A2 (inPLA2) activity, a marker of membrane lipid repair/remodelling.

CONCLUSIONS: Increased niacin sensitivity in UHR states likely indicates an impaired balance of eicosanoids and omega-6/-9 FA at a membrane level. Our findings suggest that the emergence of psychosis is associated with an increased mobilisation of eicosanoids prior to the transition to psychosis possibly reflecting a "pro-inflammatory state", whereas thereafter eicosanoid mobilisation seems to be attenuated. Potential treatment implications for the UHR state should be further investigated.

Extending light-weighting and mass-production of ultra high strength steels via condition-based maintenance

The use of ultra high strength steels (UHSS) in the automotive industry presents a significant opportunity for continued vehicle light-weighting, due to possible strength-to-weight improvements of three to four times that of conventional sheet steel grades. This performance benefit is achievable whist maintaining most of the advantages of low-cost mass-production associated with the cold stamping of sheet steel for automotive body components. However, the introduction of UHSS can result in significantly increased wear of the stamping tools, which is difficult to predict at the design stage and can lead to unexpected process failure during mass-production. Therefore, there is a need to be able to monitor and predict the onset of severe wear, such that the best course of condition-based maintenance can be scheduled and unscheduled stoppages due to tool wear eradicated. This paper describes a novel active monitoring system that is being developed by researchers at Deakin University, The Australian National University and Ford Motor Company, Asia Pacific and Africa. The aim of the active monitoring system is to detect the initial onset of a change of state, such as wear, through the measurement of variables such as punch force and audio signals. A semi-industrial stamping process, using a progressive die setup and high strength steel sheet with hardened tool steel tooling, is the experimental basis for the initial model and system development.

Directional water transport fabrics with durable ultra-high one-way transport capacity

Fabrics with automatic one-way water transport ability are highly desirable for applications in daily life, industry, health, and defense. However, most of the studies on one-way water transport fabrics only report the qualitative water transport results. The lack of quantitative measure makes it hard to assess the directional transport quality. Here, it is proved that a hydrophilic fabric after being electrosprayed with a thin layer of hydrophobic coating on one side shows one-way water transport ability. By using moisture management tester, the water transport property is qualitatively characterized and the effect of hydrophobic fabric layer thickness on one-way water transport feature is examined. The hydrophobic fabric layer thickness is found to play a key role in deciding the one-way transport ability. When a plain woven fabric with an overall thickness of 420 μm and average pore size of 33 μm is used as fabric substrate, a hydrophobic fabric layer thickness between 22 and 62 μm allows the treated fabric to show a one-way droplet transport feature. A one-way transport index as high as 861 can be attained. The one-way water transport is durable enough to withstand repeated washing. This novel fabric may be useful for development of “smart” textiles for various applications.

Vanadium microalloying for ultra-high strength steel sheet treated by hot-dip metallising

Ultra-high strength steel sheets have been subjected to heat treatments that simulate the thermal cycles in hot-dip galvanising and galvannealing processes and evaluated with respect to their resulting mechanical properties and microstructures. The steels contained suitable contents of carbon (∼0.2%), manganese (1.2%) and chromium (0.4%) to ensure that they could be fully transformed to martensite after austenitisation followed by rapid cooling in a continuous annealing line, prior to galvanising. Different contents of vanadium (0–0.1%) and nitrogen (0.002–0.012%) were used to investigate the possible role of these microalloying elements on the strength of the tempered martensite. Vanadium, especially when in combination with a raised nitrogen content, helps to resist the effect of tempering so that a larger proportion of the initial strengthening is preserved after the galvanising cycle, giving tensile strength levels exceeding 1000 MPa. Different deoxidation practices using aluminium or silicon have also been included. These showed similar strength levels at corresponding carbon contents but the bendability of the Si-killed steel sheet was considerably superior. Microstructural examinations have been made on the annealed steels but the reason for the beneficial effect of vanadium is still not fully explained. It is concluded that microalloying with vanadium is a very promising approach in the development of corrosion-resistant ultra-high strength steel sheet products.

Aging effects on the metabolic and cognitive energy cost of interlimb coordination

Many everyday motor tasks have high metabolic energy demands, and some require extended practice to learn the required coordination between limbs. Eight older (73.1 6 4.4 years) and 8 younger (23.3 6 5.9) men practiced a  high-energy two-hand coordination task with both 1808 and 908 target  relative phase. The older group showed greater performance error in both conditions, and performance at 908 was strongly attracted to antiphase coordination (1808). In a retention test one week following the acquisition trials, the older group had learned the 1808 condition but did not learn the 908 condition. Metabolic energy cost was not different between groups, but the older men showed higher heart rate and both conditions imposed  greater cognitive demands as revealed in auditory probe reaction time. Older adults’ motor learning may be inhibited by elevated heart rate at the same  oxygen cost, increased cognitive cost, and an attraction toward more  established low-energy in-phase or antiphase coordination.

Recent studies on yarn tension and energy consumption in ring spinning

High energy consumption remains a key challenge for the widely used ring spinning system. Tackling this challenge requires a full understanding of the various factors that contribute to yarn tension and energy consumption during ring spinning. In this paper, we report our recent experimental and theoretical research on air drag, yarn tension and energy consumption in ring spinning. A specially constructed rig was used to simulate the ring spinning process; and yarn tension at the guide-eye was measured for different yarns under different conditions. The effect of yarn hairiness on the air drag acting on a rotating yarn package and on a ballooning yarn was examined. Models of the power requirements for overcoming the air drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn) and overcoming the yarn wind-on tension were developed. The ratio of energy-consumption to yarn-production over a full yarn package was discussed. A program to simulate yarn winding in ring spinning was implemented, which can generate the balloon shape and predict yarn tension under a given spinning condition. The simulation results were verified with experimental results obtained from spinning cotton and wool yarns.

Mice lacking angiotensin-converting enzyme have increased energy expenditure, with reduced fat mass and improved glucose clearance

In addition to its role in the storage of fat, adipose tissue acts as an endocrine organ, and it contains a functional renin-angiotensin system (RAS). Angiotensin-converting enzyme (ACE) plays a key role in the RAS by converting angiotensin I to the bioactive peptide angiotensin II (Ang II). In the present study, the effect of targeting the RAS in body energy homeostasis and glucose tolerance was determined in homozygous mice in which the gene for ACE had been deleted (ACE^-/-) and compared with wild-type littermates. Compared with wild-type littermates, ACE^-/- mice had lower body weight and a lower proportion of body fat, especially in the abdomen. ACE^-/- mice had greater fed-state total energy expenditure (TEE) and resting energy expenditure (REE) than wild-type littermates. There were pronounced increases in gene expression of enzymes related to lipolysis and fatty acid oxidation (lipoprotein lipase, carnitine palmitoyl transferase, long-chain acetyl CoA dehydrogenase) in the liver of ACE^-/- mice and also lower plasma leptin. In contrast, no differences were detected in daily food intake, activity, fed-state plasma lipids, or proportion of fat excrete in fecal matter. In conclusion, the reduction in ACE activity is associated with a decreased accumulation of body fat, especially in abdominal fat depots. The decreased body fat in ACE^-/- mice is independent of food intake and appears to be due to a high energy expenditure related to increased metabolism of fatty acids in the liver, with the additional effect of increased glucose tolerance.

The 'caffeine-sweetness' effect; potential reduction of energy in caffeinated sugar-sweetened soft drinks

Background – Excessive consumption of sugar sweetened beverages (SSB) is a contributing factor in the occurrence of overweight and obesity. The high energy intake, low satiation, high glycemic index, and intense marketing are all thought to contribute to their over consumption. In addition, the role of the mildly-addictive chemical caffeine in SSB has been questioned (Griffiths and Vernotica, 2000, Keast and Riddell, 2007). We have previously shown that low concentrations of caffeine may decrease sweetness of sugars and thereby result in excess energy in SSB formulations (Ebbeling et al., 2006).
Objective – Without noticeably affecting flavour, to determine potential energy reduction when decreasing sucrose concentration from caffeinated and de-caffeinated SSB.
Design – Human psychophysical taste evaluations in water, sucrose and model SSB. Triangle forced-choice ascending method of limits was used to determine caffeine taste threshold in water and sucrose (n= 62). Directional paired comparison tests to determine 1/ the influence of caffeine on sweetness of sucrose (n= 23), and 2/ the nonperceivable difference when decreasing the sucrose and caffeine concentrations in a model SSB (n= 30).
Outcomes – Caffeine, at sub-threshold concentrations in common SSB (0.67mM) can be perceived in sucrose solutions because it significantly inhibits sweetness (p<0.001), the ‘caffeine sweetness effect’. Presumably coremoval of caffeine and sucrose could be achieved without affecting the sweetness of the SSB. Removing caffeine from the model SSB allowed an energy reduction of 137.4 KJ per 500 ml serving (12.6% sucrose reduction) without noticeably affecting flavour for 80% of the population. The energy reduction possible without co-removal of caffeine was a more modest 32 KJ per 500 ml serving (3.5% sucrose reduction).
Conclusion – Sub-threshold concentrations of caffeine suppress sweetness resulting in higher concentrations of sugars in SSB. Excessive consumption of SSB is linked to the obesity epidemic, and we suggest the removal of caffeine and subsequent removal of 137.4 KJ energy will have long term public health benefits.