Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications

Hydroxyapatite/titania (HA/TiO₂) double layers were coated onto Ti scaffolds throughout for orthopaedic applications by sol-gel method. Differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and X-ray diffractometry (XRD) were used for the characterisation of the phase transformations of the dried gels and coated surface structures. Scanning electron microscope (SEM) equipped with energy dispersive spectrometry (EDS) was used for the observation and evaluation of the morphology and phases of the surface layers and for the assessment of the in vitro tests. The in vitro assessments were performed by soaking the HA/TiO₂ double coated samples into the simulated body fluid (SBF) for various periods. The TiO₂ layer was coated by a dipping-coating method at a speed of 12 cm/min, followed by a heat treatment at 600 °C for 20 min. The HA layer was subsequently dipping-coated on the outer surface at the same speed and then heat-treated at difference temperatures. The results indicat that the HA phase begins to crystallize after a heat treatment at 560 °C. The crystallinity increases obviously at 760 °C. SEM observations find no delamination or crack at the interfaces of HA/TiO₂ and TiO₂/Ti. The HA/TiO₂ coated Ti scaffolds displays excellent bone-like apatite forming ability when it is soaked into SBF. Ti scaffolds after HA/TiO₂ double coatings can be anticipated as promising implant materials for orthopaedic applications

Sol-gel derived hydroxyapatite/titania biocoatings on titanium substrate

A simple sol–gel method was successfully developed for a hydroxyapatite (HA)/TiO₂ double layer deposition on a pure titanium substrate. Phase formation, surface morphology, and interfacial microstructure were investigated by differential scanning calorimetry analysis (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The TiO₂ layer was coated by a spin coating method at a speed of 1500 rpm for 15 s, followed by a heat treatment at 560 °C for 20 min. The HA film was subsequently spin coated on the outer surface at the same speed and then heat-treated at difference temperatures. Results indicated that the HA phase began to crystallize after a heat treatment at 580 °C; and the crystallinity increased obviously at a temperature of 780 °C. The HA film showed a porous structure and a thickness of 5–7 μm after the heat treatment at 780 °C. SEM observations revealed no delamination and crack at the interfaces of HA/TiO₂ and TiO₂/Ti. The HA film with a porous structure is expected to be more susceptible to the natural remodeling processes when it is implanted in a living body.

Relationship between platelet phospholipid FA and mean platelet volume in healthy men

Increased mean platelet volume (MPV) has been suggested as an independent risk factor for acute myocardial infarction and the increased reactivity of large platelets. The aim of this study was to investigate the correlation between platelet phospholipid (PL) PUFA composition and MPV in 139 free-living healthy men ages 20-55 yr (vegans, n = 18; ovolacto vegetarians, n = 43; moderate meat-eaters, n = 60; and high meateaters, n = 18). Each subject completed a semiquantitative Food Frequency Questionnaire and gave a blood sample. Platelet PL FA composition and MPV were determined by standard methods. MPV was significantly greater in the vegans than in the ovolacto vegetarian, moderate, or high meat-eater groups (P < 0.01). Both vegan and ovolacto vegetarian groups had significantly higher platelet PL 18:2n-6 and 22:4n-6, and lower 20:5n-3 and 22:6n-3 compared with the moderate and high meat-eater groups. The vegans demonstrated a significant reduction in 20:4n-6 and 22:5n-3 compared with the ovolacto vegetarian, high meat-eater, and moderate meat-eater groups. Bivariate analysis results showed that MPV was significantly positively correlated with platelet PL 18:2n-6 (P = 0.048) and negatively correlated with 20:3n-6 (P = 0.02), 20:5n-3 (P = 0.005), and 22:5n-3 (P< 0.0001), respectively. In a multiple linear regression analysis, after controlling for potential confounding factors such as dietary group, age, exercise, body mass index, and dietary polyunsaturated and saturated fat, cholesterol, carbohydrate, and fiber intake, the MPV was still strongly negatively correlated with platelet PL 20:3n-6 (P = 0.003) and 22:5n-3 (P = 0.001). The present data suggest that 22:5n-3 and 20:3n-6 may play a role in the structural function of the platelet membrane.

Lipids and FA analysis of canine prostate tissue

It is widely reported that an association exists between dietary fat intake and the incidence of prostate cancer in humans. To study this association, there is a need for an animal model where prostate carcinogenesis occurs spontaneously. The canine prostate is considered a suitable experimental model for prostate cancer in humans since it is morphologically similar to the human prostate and both humans and dogs have a predisposition to benign and malignant prostate disease. In this study, the FA and lipids profiles of the normal canine prostate tissue from nine dogs were examined. The total lipid content of the canine prostate tissue was 1.7±0.5% (wet weight). The lipid composition analysis using TLC-FID showed that the two major lipid classes were phospholipids and TAG. Total FA, phospholipid, and TAG FA analysis showed that the major FA were palmitic acid (16∶0), stearic acid (18∶0), oleic acid (18∶1), linoleic acid (18∶2n−6), and arachidonic acid (20∶4n−6), The n−3 FA were present at <3% of total FA and included α-linolenic acid (18∶3n−3) (in total and TAG tissue FA), EPA (20∶5n−3) (not in TAG), and DHA (22∶6n−3) (not in TAG). The n−3/n−6 ratio was 1∶11, 1∶13, and 1∶8 in total, phospholipid, and TAG FA, respectively. This study shows the canine prostate has a low level of n−3 FA and a low n−3/n−6 ratio. This is perhaps due to low n−3 content of the diet of the dogs. FA analysis of dogfoods available in Australia showed that the n−3 content in both supermarket and premium bran dogfoods was <3% (wet weight), and the n−3/n−6 ratio was low.

Lipid, FA, and sterol composition of New Zealand green lipped mussel (Perna canaliculus) and Tasmanian blue mussel (Mytilus edulis)

The lipid, FA, and sterol composition of the New Zealand green lipped mussel (NZGLM, Perna canaliculus) and of the Tasmanian blue mussel (TBM, Mytilus edulis) were compared using TLC-FID and GC-MS. The respective mussel species were obtained from three different sites in both New Zealand (NZ) and Tasmania. Lipid class distribution of both mussel species was characterized by a high proportion of phospholipid (PL, 57–79%) and TG (10–25%), FFA (7–12%), and sterols (ST, 12–18%). The NZGLM had higher proportions of TG, FFA, and ST (P<0.01), whereas the TBM had a higher proportion of PL (P<0.01). There were higher proportions of total PUFA, saturated FA, n−3 FA, and hydroxy and nonmethyleneinterrupted FA (P<0.05) in the TBM compared with the NZGLM. The major FA in the NZGLM were 16∶0 (15–17%), 20∶5n-3 (14–20%), and 22∶6n-3 (11–17%). The same FA dominated lipids in the TBM, although there were significantly higher proportions of 16∶0 (P=0.000) and 22∶6 n−3 (P=0.003) and lower proportions of 20∶5n-3 (P=0.0072) in the TBM. A novel PUFA, 28∶8n-3, was detected in both mussels with higher amounts in the TBM, which probably reflects a greater dietary contribution of dinoflagellates for this species. Cholesterol was the dominant sterol in both mussels. Other major sterols included brassicasterol, 22-methylcholesterol, trans-22-dehydrocholesterol, and desmosterol. There were significant differences (P<0.05) between the NZGLM and TBM for 12 of the 20 sterols measured. Six sterols showed significant site differences for the NZGLM, and 10 for the TBM. The differences in the FA and sterol composition between the two species may be due to the diet of the NZGLM being more diatom-derived and the diet of the TBM having a greater dinoflagellate component.

Photo-catalysis of red wine stains using titanium dioxide sol-gel coatings on wool fabrics

This paper investigated the use of titanium dioxide sol-gel coatings to photo-catalyse red wine stains on wool fabrics. Coatings were produced by the hydrolysis and condensation of titanium butoxide (Ti(OC4H9)4) on the surface of wool fabrics after pad application. Coatings were partially converted to the anatase form of titanium dioxide by prolonged immersion in boiling water. The coating presence was confirmed using scanning electron microscopy, UVspectrophotometry and atomic force microscopy. Coated samples were measured for photo-catalytic activity by degrading red wine stains from the surface of the coated fabric. The level of photocatalysis was determined for each of the coating systems after 168 hours. Red wine stains were photo-catalysed and level of staining was reduced from the UV exposed surface of the coated wool fabric.

Bioactivating the surfaces of titanium by sol-gel process

In the present study, titanium (Ti) samples were surface-modified by titania (TiO₂), silica (SiO₂) and hydroxyapatite (HA) coatings using a sol-gel process. The bioactivity of the film-coated Ti samples was investigated by cell attachment and morphology study using human osteoblast-like SaOS-2 cells. Results of the cell attachment indicated that the densities of cell attachment on the surfaces of Ti samples were significantly increased by film coatings; the density of cell attachment on HA film-coated surface was higher than those on TiO₂ and SiO₂ film-coated surfaces. Cell morphology study showed that the cells attached, spread and grew well on the three kinds of film-coated surfaces. It can be concluded that the three kinds of film coatings can bioactivate the surfaces of Ti samples effectively. Overall, Ti sample with HA film-coated surface exhibited the best bioactivity.

Bioactive hydroxyapatite coating on titanium-niobium alloy through a sol-gel process

Hydroxyapatite (HA) was coated on the surface of a titanium-niobium (Ti-Nb) alloy by a sol-gel process. Triethyl phosphite and calcium nitrate were used as the phosphorus (P) and calcium (Ca) precursors respectively to prepare a Ca/P sol solution. The Ti-Nb alloy was dip-coated in the sol and heated at 600°C for 30 minutes. X-ray diffraction (XRD) analysis indicated the major phase constituent of the coating after heat treatment was HA. Scanning electron microscopy (SEM) observation showed that a few cracks were distributed on the HA coating. The in-vitro bioactivity of the HA coated Ti-Nb alloy was assessed using a cell culture of SaOS-2 osteoblast-like cells. The density of cell attachment was determined by MTT assay; the cell morphology was observed by SEM. Results indicated that the density of cell attachment on the surface of the Ti-Nb alloy was significantly increased by HA coating. Cell morphology observation showed that cells attached, spread and grew well on the HA coated surface. It can be concluded that the HA coating improved the in-vitro bioactivity of Ti-Nb alloy effectively.

Photochromic wool fabric by sol-gel coating

This thesis investigates the possibility of producing photochromic wool fabrics using a silica sol-gel coating method. Silicas made from sol-gel methods are uniquely suited to host photochromic dyes for developing colour-changing wool. The achieved photochromic effects have opened a new product area for fashion effects on wool textiles.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

Photochromic wool fabric by sol-gel coating and photochromism

The application of photochromism in textiles has potential to create new opportunities to develop fancy colour-changing effects in fashionable textiles, as well as smart garments capable of protecting wearers from the effects of UV irradiation and responding to environmental changes. This book presents a coating method for achieving quick and obvious photochromic effects on wool fabrics using conventional photochromic dyes and hybrid silicas. It covers details about fabricating different types of photochromic dye-silica coatings, measuring their optical performance, assessing some physical characterisations of the coatings, and measuring the effects of the coatings on fabric performance.