Genetic diversity of brown and rainbow trout in Australia

Australian rainbow and brown trout were analysed using molecular genetic techniques to determine the effect translocation has had on the existing gene pool. There was some indication of loss of diversity associated with their translocation however no differences in genetic diversity between Australian hatchery and wild populations were apparent.

Grouper aquaculture in three Asian countries : farming and economic aspects

The study focussed on three key suppliers of fingerlings and live fish in Asia. Grouper hatchery businesses are lucrative even at low survival rates. The findings indicate that farming practices across these countries are similar. Most farmers adopt traditional practices and lack incentives to reduce cost, but remain proce focussed.

Quantifying rubber degradation using NMR

Ageing can lead to the degradation of the tensile properties of natural rubber. The ageing process causes changes in the polymer segmental motion as well as the chemical structure, both of which can be monitored using nuclear magnetic resonance (NMR) spectroscopy. This work demonstrates that NMR can quantify rubber degradation due to ageing, and also that relatively simple NMR equipment can be used. This simpler equipment can be made portable and so could give a simple and fast indication of the condition of rubber in service. The 1H NMR transverse relaxation time, T2, and the 13C NMR spectrum using cross polarization and magic angle spinning (CP MAS) for samples taken at various levels of a degraded natural rubber liner were compared. These experiments showed that, as the level of degradation increased, the 1H NMR transverse relaxation time decreased. The 13C spectra showed considerable peak broadening, indicative of decreased mobility with increased level of degradation as well as the presence of degradation products. Further investigations using lower powered NMR equipment to measure the 1H NMR transverse relaxation times of two different series of natural rubbers were also performed. This work has shown that this simpler method is also sensitive to structural and mechanical property changes in the rubber. This method of monitoring rubber degradation could lead to the non-destructive use of NMR to determine the condition of a part in service.

Phosphonium ionic liquids as lubricants for aluminium-steel

The performance of a series of novel room temperature ionic liquids (ILs) based on the trihexyl(tetradecyl)phosphoniumcation (P66614 +) and a number of novel anions have been studied in pin-on-disk tests using a 100Cr6 steel ball on AA2024 aluminium disks.

The anions coupled to the (P66614 +) cation include diphenyl phosphate (DPP-), dibutyl phosphate (DBP-), bis (2,4,4-trimethyl pentyl) phosphinate (M3PPh-) and bis(2-ethyl hexyl) phosphate (BEH-).

More traditional anions such as bis(trifluoromethanesulfonyl) amide (NTf2 -) and bromide (Br-) were also investigated. Experiments were conducted at various loads to assess the IL film forming abilities.

The results suggest that the structure of the anion is important in forming a surface film that reduces the friction and wear of the aluminium disk. At 30N five of the six ILs tested showed a 30-90% reduction in wear, as determined from wear scar depth measurements, compared to fully formulated diesel oil.

The IL lubricant with a diphenyl phosphate anion achieved the lowest wear coefficient, showing a better performance than a typical fluorine-containing IL anion, NTf2.

To further investigate wear mechanisms and surface interactions the wear scars were analysed using a scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS).

Transition in wear performance for ionic liquid lubricants under increasing load

The effect of ionic liquid (IL) lubrication for aluminium/steel systems is highly dependant on the applied load and the IL structure. This study illustrates that a change in anion of an IL lubricant results in different physicochemical properties that will alter its performance at a given load. As the load is increased there is a shift in lubricant performance and mechanism of the IL. Up to a load of 30 N the lowest wear coefficient was achieved by a phosphonium diphenylphosphate IL, whilst above 30 N a phosphonium bis(trifluoromethanesulfonyl)amide IL was able to form a more tenacious tribolayer that resulted in the lowest wear.

Novel halogen-free chelated orthoborate-phosphonium ionic liquids : synthesis and tribophysical properties

We report on the synthesis, characterisation, and physical and tribological properties of halogen-free ionic liquids based on various chelated orthoborate anions with different phosphonium cations, both without halogen atoms in their structure. Important physical properties of the ILs including glass transition temperatures, density, viscosity and ionic conductivity were measured and are reported here. All of these new halogen-free orthoborate ionic liquids (hf-BILs) are hydrophobic and hydrolytically stable liquids at room temperature. As lubricants, these hf-BILs exhibit considerably better antiwear and friction reducing properties under boundary lubrication conditions for steel–aluminium contacts as compared with fully formulated (15W-50 grade) engine oil. Being halogen free these hf-BILs offer a more environmentally benign alternative to ILs being currently developed for lubricant applications.

Strong population genetic structure and its management implications in the mud carp Cirrhinus molitorella, an indigenous freshwater species subject to an aquaculture and culture-based fishery

This study investigated population genetic structure and diversity of mud carp Cirrhinus molitorella, a species widely used in aquaculture and culture-based fisheries in China and Mekong River riparian countries. Seven newly developed and one published microsatellite DNA markers were used to analyse samples from six wild locations, four hatchery broodstocks and one farmed site from the Mekong, Red and Pearl Rivers. Significant genetic structure was detected in C. molitorella, with isolation-by-distance being a strong force in the Mekong. Pair-wise F_ST, Fisher's exact tests for population differentiation, permutation tests and individual-based structure analysis all support the recognition of a sample originating from Toul Krasaing Lake (Cambodia) and one between Kratie and Stung Treng (Cambodia) as distinct from the remainder of the sampled range. Samples from the main upper Mekong and the Nam Khan River were significantly differentiated, but on a time scale inferred to be short (i.e. by genetic drift, not sufficient for evolution of new microsatellite alleles). The Mekong stock of C. molitorella was strongly differentiated from those from the Red and Pearl Rivers, inferred to be on an evolutionary time scale. Finer-scale sampling is warranted to further improve the understanding of genetic interactions among fish from the Mekong and its tributaries. Detailed studies on the ecology of C. molitorella (e.g. migration pathways and preferred spawning habitats) would provide useful information to explain the patterns of genetic structure detected here, and deepen insights about evolutionary distinctiveness of the population units.

Over-winter lipid depletion and mortality of age-0 rainbow trout (Oncorhynchus mykiss)

In this study we identify the size-dependent risk of winter starvation mortality as a strong selective pressure on age-0 rainbow trout (Oncorhynchus mykiss) that could promote the risk-taking behaviour and allocation of energy to lipids previously observed in young trout cohorts. Age-0 trout subjected to simulated winter starvation conditions gradually depleted lipid reserves to a critical minimum lipid content below which death occurred. Small fish with lower lipid content exhausted lipid reserves earlier, and experienced high mortality rates sooner, than larger fish with greater lipid content. Consequently, winter starvation endurance was dependent upon size-dependent lipid reserves and winter duration. To validate the laboratory findings in the field, we stocked several size classes of hatchery-raised trout with known lipid content at the start of winter into two experimental lakes, and estimated survival and lipid depletion at winter's end. Larger age-0 trout had greater initial lipid reserves than smaller trout. Individuals depleted most of their lipid reserves over the winter, and experienced mortality that ranged from just under 60% for the largest individuals to just over 90% of the smallest individuals. Many survivors had lipid contents near, but none were below, the minimum lipid content determined in the laboratory.

A comparison of phosphorus and fluorine containing IL lubricants for steel on aluminium

Ionic liquids have been shown to be highly effective lubricants for a steel on aluminium system. This work shows that the chemistry of the anion and cation are critical in achieving maximum wear protection. The performance of the ILs containing a diphenylphosphate (DPP) anion all showed low wear, as did some of the tris(pentafluoroethyl)trifluorophosphate (FAP) and bis(trifluoromethanesulfonyl)amide (NTf2) anion containing ILs. However, in the case of the FAP and NTf2 based systems, a cation dependence was observed, with relatively poor wear resistance obtained in the case of an imidazolium FAP and two pyrrolidinium NTf2 salts, probably due to tribocorrosion caused by the fluorine reaction with the aluminium substrate. The systems exhibiting poor performance generally had a lower viscosity, which also impacts on their tribological properties. Those ILs that exhibited low wear were shown to have formed protective tribofilms on the aluminium alloy surface.

Reproductive development, GnRHa-induced spawning and egg quality of wild meagre (Argyrosomus regius) acclimatised to captivity

The objective of the study was to acclimatise wild-caught meagre (Argyrosomus regius) to captivity to produce viable eggs for aquaculture production. Twelve meagre (3 males and 9 females, mean weight = 20 ± 7 kg) were caught and transported to a land-based facility on 26 October 2006. During, March to June 2007, all three males were spermiating and five of the nine females were in vitellogenesis with mean maximum oocyte diameter ≥550 μm. No spontaneous spawning was observed. Two hormone treatments, either a single injection of gonadotropin-releasing hormone agonist (GnRHa, 20 μg kg−1 for females and 10 μg kg−1 for males) or a slow-release implant loaded with the same GnRHa (50 μg kg−1 for females and 25 μg kg−1 for males), were used to induce spawning on three different dates on 26 March 2007, 4 May 2007 and 18 April 2008. From each spawning event, the following parameters were determined: fecundity, number of floating eggs, egg size, fertilisation and hatching success, unfed larval survival, and proximal composition and fatty acid profile of the eggs. In 2007, two females that were injected on 26 March and 4 May spawned a total of 5 times producing 9,019,300 floating eggs and a relative fecundity of 198,200 eggs kg−1 and two different females that were implanted on the same dates spawned 14 times producing 12,430,000 floating eggs and a relative fecundity of 276,200 eggs kg−1. In 2008, a pair that was implanted spawned five times producing a total of 10,211,900 floating eggs and a relative fecundity of 527,380 eggs kg−1. The latency period was 48–72 h. Parameters were compared between hormone treatments, date of hormone induction and parents determined by microsatellites. Percentage hatch and egg size were 70 ± 0.3% and 0.99 ± 0.02 mm, respectively, for GnRHa-implanted fish and were significantly higher (P < 0.05) compared to 30 ± 0.3% and 0.95 ± 0.03 mm, respectively, for injected fish. Few differences were observed in proximal composition and fatty acid profile and for all spawns mean (% dry weight) lipid content was 17.3 ± 3.0%, carbohydrate was 4.4 ± 1.9% and protein was 31.5 ± 6.4% and the essential fatty acids: Arachidonic acid (ARA, 20:4n-6) ranged between 0.9 and 1% (of total fatty acids), eicosapentaenoic acid (EPA 20:5n-3) 7.7–10.4% and docosahexaenoic acid (DHA 22:6n-3), 28.6–35.4%. All good quality spawns were obtained in the second and/or third spawn after GnRHa treatment, whereas all bad quality spawns were obtained either on the first spawn or after the fifth spawn. Both spawning protocols gave commercially viable (1,000,000+) numbers of good quality eggs that could form the basis of a hatchery production.