Synthesis and characterization of silver nanoparticles and titanium oxide nanofibers : toward multifibrous nanocomposites

A new method was investigated to produce new multiscale fibrous nanocomposites comprised of titanium oxide (TiO₂) nanofibers and silver (Ag) nanoparticles (NPs). The process involved electrospinning TiO₂ precursor solution containing colloidal solution of Ag NPs, and organic solvent (dimethyl-n′n-formamide) to fabricate a porous, nonwoven, free-standing nanofiber mesh. Postprocess heating of the electrospun nanofibers entailed calcination in air environment at 500°C for 3 h. Microemulsion processing was used to generate NPs of Ag in a monodispersed distribution throughout the colloidal solution. X-ray diffraction data were consistent with the anatase phase of TiO2, while transmission electron microscopy and hydrogen desorption measurements revealed a very porous microstructure. It was demonstrated that NP colloidal stability is solvent dependent. It is anticipated that incorporation of metal particles in nanofibers will lead to enhanced photocurrent generation, when used in functional devices.

Extraction of silver(i) from aqueous solutions in the absence and presence of copper(ii) with a methimazole-based ionic liquid

The ionic liquid (IL) 2-butylthiolonium bis(trifluoromethanesulfonyl)amide, [mimSBu][NTf₂], facilitates the efficient extraction of silver(i) from aqueous media via interaction with both the cation and anion components of the IL. Studies with a conventional aqueous-IL two phase system as well as microextraction of silver(i) by a thick IL film adhered to an electrode monitored in situ by cyclic voltammetry, established that [mimSBu][NTf₂] can extract electroactive silver(i) ions from an aqueous solution. The pH of the aqueous phase decreases upon addition of [mimSBu]⁺, which is attributed to partial release of the hydrogen attached to the N(3) nitrogen atom of the imidazolium ring. The presence of silver(i) further increase the acidity of the aqueous phase as a consequence of coordination with the IL cation component. Voltammetric and ¹H and ¹³C NMR techniques have been used to establish the nature of the silver(i) complexes extracted, and show that the form of interaction with the IL differs from that outlined previously for the extraction of copper(ii). Insights on the competition established when silver(i) is extracted in the presence of copper(ii) are provided. Finally, it is noted that metallic silver can be directly electrodeposited at the electrode surface after extraction of silver(i) into [mimSBu][NTf₂] and that back extraction of silver(i) into aqueous media is achieved by addition of an acidic aqueous solution.

Optical phase change at the interface between mica and thin silver film

We describe a simple experiment which allows unequivocal determination of optical phase change upon reflection of light at the mica-silver interface. While the physical origin of such a phase change at the dielectric-metal interface is well understood to lie in absorption of electromagnetic energy by the metal, inconsistency and ambiguity has persisted as to what its sign and magnitude should be in the field of thin film optics. Most commonly, it has been assigned to be negative for mathematical convenience or just arbitrarily. Our finding shows that with the convention exp(-iωt) for time dependence of the electromagnetic wave, the phase change at the interface between mica and the thin silver film is necessarily positive and its magnitude falls between π and 3π/2 for silver thicknesses down to nanometres. This gives a physically reasonable correspondence to an increased equivalent thickness of the dielectric material, and it clarifies the assignment of interference orders in the harmonic series in a spectrum.

Kinetic effects of halide ions on the morphological evolution of silver nanoplates

Time-resolved extinction spectroscopy is employed to study the reaction kinetics in the shape-conversion reaction involving halide ions (including Cl-, Br- and I-) etching (sculpturing) silver nanoplates. A series of time-resolved extinction spectra are obtained during the in situ etching process and the evolution of surface plasmon resonance (SPR) of the silver nanoparticles is analyzed. Spectral analysis indicates that the conversion of nanoprisms starts simultaneously with the emergence of nanodisks when the halide ions are added. The etching rate of different halide ions is evaluated through the in-plane dipole resonance peak intensity of silver nanoplates vs. the reaction time (dI/dt). The relationship between the etching rate and the halide ion concentration shows that the halide ion etching reaction can be considered as a pseudo-first-order reaction. The effect of different halide ions on the shape-conversion of silver nanoplates is compared in detail. The activation energy of the etching reaction is calculated, which indicates that the etching ability of different halide ions is on the order of Cl - < I- < Br-.

Photochemical formation of silver nanodecahedra : structural selection by the excitation wavelength

Silver decahedra have been successfully synthesized with high yield via a photochemical reaction using blue light-emitting diodes (LEDs) as the exciting light source. The decahedra display distinct properties with respect to the ability of light scattering. The photochemical growth process of silver decahedra was monitored by both extinction and scattering spectral evolution. A suggested formation mechanism of silver decahedron is discussed.

Photoinduced shape conversion and reconstruction of silver nanoprisms

A series of shapes of silver nanoplates were achieved by adjusting the concentration of citrate in the colloid in the photoinduced process. The local surface plasmon resonance (LSPR) of the silver nanoplates could be tuned gradually in a range from 740 to 440 nm. In contrast, the LSPR band can be photomediated again to the long wavelength region within 620-690 nm only by adding more citrate to the colloidal system. The initial silver nanoprisms converted to the discal shape under the light effect. In this conversion, the coupling effect of the plasmon resonance and the light source speeds up the photothermal reaction. Subsequently, the reconstruction of silver nanoprisms from the nanodisks took place in the presence of more citrate through the photoconversion.

The facet selectivity of inorganic ions on silver nanocrystals in etching reactions

The facet selectivity of the halide ions and chlorauric acid for several shaped silver nanocrystals is presented in this paper. Two inorganic ions show different representations when they are used for etching silver nanocrystals in the self-sacrificial template reaction. The morphological changes of the silver nanocrystals indicate that the halide ions prefer to etch the (110) facets of silver nanocrystals, while in the chlorauric acid etching reaction, gold first modifies the (110) facets and then lets chlorauric acid etch the (111) facets instead. The selective facet etching on individual nanoparticles in the solution phase has crucial significance in the control-synthesis of nanocrystals and the facet asymmetric reaction.

Real-time, in-situ, extinction spectroscopy studies on silver-nanoseed formation

In this paper, real-time extinction spectroscopy was employed to analyze in situ the fast formation process of silver seeds. The influencing factors for silver-seed formation, including the concentration of the reducer (NaBH 4), the amount of stabilizer (citrate), and the addition procedure of NaBH4, were evaluated. The configuration of the surface plasmon resonance (SPR) spectra of silver nanoparticles, which reflected the morphology of the produced silver seeds, was found to be distinctly affected by the NaBH4 concentration. Homogeneous silver nanoparticles were obtained when the added NaBH4 was lower in concentration than 2.00 mM. In contrast, higher concentrations of reducing agent (>3.00 mM NaBH4) resulted in uneven silver nanoparticles. Mie theory was applied to clarify the correlation of the SPR and the size of the silver seeds. Repeated additions of a small amount of the reducing agent could increase the monodispersity and isotropy of silver seeds. Real-time extinction spectroscopy is a convenient technique that achieves the in-situ and nondestructive measurement of intermediates in the formation process of silver nanoseeds.

Coloration of cotton fibers with anisotropic silver nanoparticles

Anisotropic silver nanoparticles were assembled on cotton fibers to realize the coloration of cotton. The assembly of silver nanoparticles on fibers was achieved by linking of poly(diallyldimethylammonium chloride) (PDDA) at room temperature. The silver nanoparticle treated cotton showed different colors because of localized surface plasmon resonance (LSPR) property of silver nanoparticles. The coloration was completed through electrostatic interaction between the PDDA treated cotton surface and the anisotropic silver nanoparticles in the reaction system. Scanning electron microscopy (SEM) characterization demonstrated that the morphologies of silver nanoparticles remained unchanged during the coloration process, so the treated cotton inherited the LSPR optical features of silver nanoparticles. Moreover, the cotton colorated with silver nanoparticles showed reasonably good color fastness to washing, which will facilitate the practical application of this coloration process.

A resonance tunable and durable LSPR nano-particle sensor : AL2O3 capped silver nano-disks

Localized surface plasmon resonance (LSPR) biosensors are employed to detect target biomolecules which have particular resonance wavelengths. Accordingly, tunability of the LSPR wavelength is essential in designing LSPR devices. LSPR devices employing silver nano-particles present better efficiencies than those using other noble metals such as gold; however, silver nano-particles are easily oxidized when they come in contact with liquids, which is inevitable in biosensing applications. To attain both durability and tunabilty in a LSPR biosensor, this paper proposes alumina (AL₂O₃) capped silver nano-disks. It is shown that through controlling the thickness of the cap, the LSPR resonance frequency can be finely tuned over a wide range; and moreover, the cap protects silver nano-particles from oxidation and high temperature.

The rise of the 'silver surfer' : online social networking and social inclusion for older adults

As the proportion of older adults continues to grow in many Western countries, there are increasing concerns about how to meet their needs. Ensuring social connectedness and inclusion is one way to support older adults’ wellbeing. Online social networking has become common place amongst younger age groups, suggesting its possible usefulness for older adults, in order to combat isolation and loneliness. Some quantitative studies have already explored the amount and degree of online social networking amongst older adults. To add further understanding of how older adults experience social inclusion via the internet, the current qualitative study aimed to explore older adults’ subjective experience of online social networking. Findings demonstrated a number of supports and barriers to social inclusion which reflect barriers to social inclusion of older adults in the non-virtual world. Recommendations to support social inclusion of isolated older adults via online social networking are suggested.