Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques

Functionalization of multi-walled carbon nanotubes (MWCNTs) plays an important role in eliminating nanotube aggregation for reinforcing polymeric materials. We prepared a new class of natural rubber (NR)/MWCNT composites by using latex compounding and self-assembly technique. The MWCNTs were functionalized with mixed acids (H2SO₄/HNO₃ = 3:1, volume ratio) and then assembled with poly (diallyldimethylammonium chloride) and latex particles. The Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy were used to investigate the assembling mechanism between latex particles and MWCNTs. It is found that MWCNTs are homogenously dispersed in the natural rubber (NR) latex as individual nanotubes since strong self-aggregation of MWCNTs has been greatly depressed with their surface functionalization. The well-dispersed MWCNTs produce a remarkable increase in the tensile strength of NR even when the amount of MWCNTs is only 1 wt.%. Dynamic mechanical analysis shows that the glass transition temperature of composites is higher and the inner-thermogenesis and thermal stability of NR/MWCNT composites are better, when compared to those of the pure NR. The marked improvement in these properties is largely due to the strong interfacial adhesion between the NR phase and MWCNTs. Functionalization of MWCNTs represents a potentially powerful technology for significant reinforcement of natural rubber materials.

Self-assembled diblock copolymer complexes via competitive hydrogen bonding

This thesis investigates self-assembly and microphase separation induced by competitive hydrogen bonding in A-b-BC diblock copolymer/homopolymer systems. A series of ordered and disordered morphologies including lamellae, hexagonal cylinders, wormlike microdomains and hierarchical structures were observed. The morphological transitions are correlated with hydrogen bonding interactions in terms of the association constants.

Characterisation of gold electrodes modified with self-assembled monolayers of l-cysteine for the adsorptive stripping analysis of copper

Electrochemical sensors for copper ions in environmental samples were prepared by modifying gold electrodes with l-cysteine by self-assembly. The adsorption of l-cysteine on gold electrodes was studied by electrochemical reductive desorption in 0.5 M KOH, and the interaction of l-cysteine with copper ions was investigated by cyclic voltammetry, chronoamperometry and X-ray photoelectron spectroscopy. At low concentrations the ratio of l-cysteine to bound Cu(II) is 2:1. At higher concentrations (0.1 M) copper reacts with adsorbed cysteine forming copper sulfide on the electrode surface. On a modified l-cysteine gold electrode, Osteryoung square wave voltammetric determination of Cu(II) with a detection limit below 5 ppb has been demonstrated.

Self-assembled monolayers into the 21st century : recent advances and applications

The modification of an interface on a molecular level with more than one molecular ‘building block' is essentially an example of the ‘bottom–up' fabrication principle of nanotechnology. The fabrication of such integrated molecular systems in electrochemistry has seen rapid progress in recent years via the development of sensing interfaces fabricated using self-assembled monolayers (SAMs). This review outlines recent advances and applications of self-assembled monolayers for modifying electrodes with an emphasis on the development of integrated molecular systems. First, some basic issues regarding fabricating integrated molecular systems, such as the role of the surface topography of the electrode and patterning surfaces, are discussed. Subsequently an overview of recent developments in pH, inorganic and bio sensing involving the use of SAMs is given. Finally emerging trends in using molecular building blocks in the fabrication of integrated molecular systems, such as nanotubes, dendrimers and nanoparticles, are reviewed.

Atom probe microscopy of self-assembled monolayers : preliminary results

We have achieved three-dimensional imaging of decanethiol self-assembled monolayers (SAMs) on metal surfaces by atom probe tomography (APT). The present Letter provides preliminary results on Ni [001] and Au [111], shows the analytical potential of APT analysis of SAMs, and details developments in specimen preparation and in data-treatment methodologies. Importantly, the investigation of the mass spectra from analysis of the SAMs revealed no combination of sulfur and hydrogen at the interface between the metal substrates and the organic materials, potentially providing insight about the bonding of the thiols on the substrate.

Engineering molecular self-assembled fibrillar networks by ultrasound

The architecture of self-organized three-dimensionally interconnected nanocrystal fibrillar networks has been achieved by ultrasound from a solution consisting of separate spherulites. The ultrasound stimulated structural transformation is correlated to the striking ultrasonic effects on turning nongelled solutions or weak gels into strong gels instantly, with enhancement of the storage modulus up to 3 magnitudes and up to 4 times more gelling capability. The basic principle involved in the ultrasound-induced structural transformation is established on the basis of the nucleation-and-growth model of a fiber network formation, and the mechanism of seeding multiplication, aggregation suppressing, and fiber distribution and growth promotion is proposed. This novel technique enables us to produce self-supporting gel functional materials possessing significantly modified macroscopic properties, from materials previously thus far considered to be “useless”, without the use of chemical stimuli. Moreover, it provides a general strategy for the engineering of self-organized fiber network architectures, and we are consequently able to achieve the supramolecular functional materials with controllable macroscopic properties.

Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites

Natural rubber (NR)/multi-walled carbon nanotube (MWCNTs) composites were prepared bycombining self-assembly and latex compounding techniques. The acid-treated MWCNTs (H2SO4: HNO3=3:1,volume ratio) were self-assembled with poly (diallyldimethylammonium chloride) (PDDA) through electrostaticadhesion. In the second assembling, NR/MWCNTs composites were developed by mixing MWCNTs/PDDAsolution with NR latex. The results show that MWCNTs are homogenously distributed throughout the NRmatrix as single tube and present a great interfacial adhesion with NR phase when MWCNTs contents areless than 3 wt%. Moreover, the addition of the MWCNTs brings about the remarkable enhancement in tensilestrength and crosslink density compared with the NR host, and the data peak at 2 wt% MWCNTs loadings.When more MWCNTs are loaded, aggregations of MWCNTs are gradually generated, and the tensile strengthand crosslink both decrease to a certain extent.

Diatoms : self assembled silica nanostructures, and templates for bio/chemical sensors and biomimetic membranes

In this review we highlight recent advances in the understanding of biosilica production, biomodification of diatom frustules and their subsequent applications in bio/chemical sensors, and as a model membrane for filtration and separation.

Self-assembled monolayers on mercury probed with a modified surface force apparatus

Self-assembled monolayers (SAMs) of three thiol compounds formed on mercury are investigated by a combination of cyclic voltammetry, electrocapillary curves, and a novel method of measuring electrical doublelayer properties. The last method involves a modified surface force apparatus in which a flat mica surface is pressed down toward a fixed mercury drop held beneath it, while both are immersed in aqueous electrolyte solution. Optical interference measurements are made of the mica-mercury separation as a function of electrical potential applied to the mercury, which yields information on the double-layer interaction between the two surfaces. Mercury is decorated by SAMs of 11-mercapto-1-undecanoic acid, which is shown to bring negative charge to the mercury/aqueous interface due to dissociation of the carboxylic acid groups; 11-mercapto-1- undecanol, which although it is uncharged changes the dipole potential of the interface; and 1-undecanethiol, which likewise changes the dipole potential, but by a different amount. The difference between the changes in dipole potential (90 mV) can be related to the different terminal groups of these two SAMs, -CH3 compared to -OH, that are in contact with the aqueous phase.

Self assembled nanostructured complexes and blends via hydrogen bonding interactions

Small angle X-ray scattering (SAXS) is useful to explain the formation of microstructures and the mechanism of microphase separation in self-assembled blends and complexes. In our study, we have used SAXA to examine the ordered and disordered nanostructures as well as morphological transitions in block copolymer/homopolymer blends and complexes [1,2].

Self-assembled peptides : characterisation and in vivo response

The fabrication of tissue engineering scaffolds is a well-established field that has gained recent prominence for the in vivo repair of a variety of tissue types. Recently, increasing levels of sophistication have been engineered into adjuvant scaffolds facilitating the concomitant presentation of a variety of stimuli (both physical and biochemical) to create a range of favourable cellular microenvironments. It is here that self-assembling peptide scaffolds have shown considerable promise as functional biomaterials, as they are not only formed from peptides that are physiologically relevant, but through molecular recognition can offer synergy between the presentation of biochemical and physio-chemical cues. This is achieved through the utilisation of a unique, highly ordered, nano- to microscale 3-D morphology to deliver mechanical and topographical properties to improve, augment or replace physiological function. Here, we will review the structures and forces underpinning the formation of self-assembling scaffolds, and their application in vivo for a variety of tissue types.

Organic Solvent-Based Graphene Oxide Liquid Crystals: A Facile Route toward the Next Generation of Self-Assembled Layer-by-Layer Multifunctional 3D Architectures

We introduce soft self-assembly of ultralarge liquid crystalline (LC) graphene oxide (GO) sheets in a wide range of organic solvents overcoming the practical limitations imposed on LC GO processing in water. This expands the number of known solvents which can support amphiphilic self-assembly to ethanol, acetone, tetrahydrofuran, N-dimethylformamide, N-cyclohexyl-2-pyrrolidone, and a number of other organic solvents, many of which were not known to afford solvophobic self-assembly prior to this report. The LC behavior of the as-prepared GO sheets in organic solvents has enabled us to disperse and organize substantial amounts of aggregate-free single-walled carbon nanotubes (SWNTs, up to 10 wt %) without compromise in LC properties. The as-prepared LC GO-SWNT dispersions were employed to achieve self-assembled layer-by-layer multifunctional 3D hybrid architectures comprising SWNTs and GO with unrivalled superior mechanical properties (Young’s modulus in excess of 50 GPa and tensile strength of more than 500 MPa).

Synthesis and application of self-assembled amphiphiles towards novel drug delivery

A library of novel amphiphiles were designed and synthesised, towards self-assembly based drug delivery for the treatment of breast cancer. The amphiphiles were formulated into liposomes of varying size and shape, and showed promising potential for drug delivery. Active targeting of breast cancer tumours was also explored with promising results.