Enhancement of ion dynamics in PMMA-based gels with addition of TiO2 nano-particles

Solvent and ion dynamics in PMMA based gels have been investigated as a function of the loading of nanosized TiO₂ particles. The gels have a molar ratio of 46.5:19:4.5:30 of ethylene carbonate (EC), propylene carbonate (PC), lithium perchlorate and PMMA, respectively. A series of samples with 0, 4, 6 and 8 wt.% TiO₂ filler were investigated. The diffusion coefficients for the lithium ions and for the two solvents (EC and PC) were investigated by pfg-NMR. It was shown that the addition of filler to the gel electrolytes enhances the diffusion of the cations, while the diffusion of the solvents remains constant. Raman measurements show no significant changes in ion–ion interactions with the addition of fillers, while the ionic conductivity is seen to decrease. However, the sample with 8 wt.% TiO₂ had a conductivity close to that of the unfilled sample.

The 'filler-effect' in organic ionic plastic crystals : Enhanced conductivity by the addition of nano-sized TiO2

The addition of nano-sized ceramic particles to the plastic crystal ethyl-methyl pyrrolidinium bis(trifluoromethane sulfonyl)amide (P₁₂TFSA) has been investigated by means of DSC and conductivity. The thermal behaviour of the plastic crystal as a function of filler content suggests that the filler particles decrease the onset temperature of the melting slightly at high loadings, however they do not decrease the crystallinity of the material. Furthermore, the IV → III transition decreases in intensity, indicating that the addition of filler increases the possibility for the crystal to remain in metastable rotator phases also at lower temperatures. The conductivity shows a more than one order of magnitude increase with the addition of filler, with a filler concentration dependence that levels out above ~ 10 wt.% TiO₂.

The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers

Nano-particle oxide fillers including TiO₂, SiO₂ and Al₂O₃ have previously been shown to have a significant affect on the properties of both polymer and polymer gel electrolytes. In some cases, conductivity increases of one order of magnitude have been reported in crystalline PEO–base complexes. In this work, we report the effects of TiO₂ and SiO₂ on a poly(Li-AMPS)-based gel polyelectrolyte. Impedance spectroscopy and pfg-NMR spectroscopy indicates an increase in the number of available charge carriers with the addition of filler. An ideal amount of ceramic filler has been identified, with additional filler only saturating the system and reducing the conductivity below that of the pristine polyelectrolyte system. SEM micrographs suggest a model whereby the filler interacts readily with the sulfonate group; the surface area of the filler being an important factor.

Composition effects on ion transport in a polyelectrolyte gel with the addition of ion dissociators

The polymerization of lithium 2-acrylamido-2-methyl-1-propane sulphonic acid with N,N′-dimethylacrylamide has yielded polyelectrolyte gels which have the favourable property of being single ion conductors. The use of single ion conductors ensures that the transport number of lithium is close to unity. The mobility of the lithium ion is still quite low in these systems, resulting in low ionic conductivity. To increase ionic conductivity more charge carriers can be added however competing effects arise between increasing the number of charge carriers and decreasing the mobility of these charge carriers. In this paper the monomer ratio of the copolymer polyelectrolyte is varied to investigate the effect increasing the number of charge carriers has on the ionic conductivity and lithium ion and solvent diffusivity using pfg-NMR. Ion dissociators such as TiO₂ nano-particles and a zwitterionic compound based on 1-butylimidazolium-3-(N-butanesulfonate) have been added in an attempt to further increase the ionic conductivity of the system. It was found that the system with the highest ionic conductivity had the lowest solvent mobility in the presence of zwitterion. Without zwitterion the mobility of the solvent appears to determine the maximum ionic conductivity achievable.

Exploiting low levels of rare earth addition in Mg extrusion alloys

The present work examines the extrusion and mechanical properties of MExlOO alloys, which contain levels of rare earth alloying additions up to 0.4 wt%. It is shown that these alloys can display the high extrudability of alloy Ml with strengths nearing those of AZ31. Most importantly, the grades display high room temperature ductility; values of total tensile elongation as high as 30% have been observed. These benefits derive from a combination of grain refinement and texture weakening.

Small seed size increases the potential for dispersal of wetland plants by ducks

1. Long-distance dispersal (LDD) is important in plants of dynamic and ephemeral habitats. For plants of dynamic wetland habitats, waterfowl are generally considered to be important LDD vectors. However, in comparison to the internal (endozoochorous) dispersal of terrestrial plants by birds, endozoochorous dispersal of wetland plants by waterfowl has received little attention. We quantified the capacity for endozoochorous dispersal of wetland plants by waterfowl and identified the mechanisms underlying successful dispersal, by comparing the dispersal capacities of a large number of wetland plant species.

2. We selected 23 common plant species from dynamic wetland habitats and measured their seed characteristics. We fed seeds of all species to mallards (Anas platyrhynchos), a common and highly omnivorous duck species, and quantified seed gut survival, gut passage speed and subsequent germination. We then used a simple model to calculate seed dispersal distances.

3. In total 21 of the 23 species can be dispersed by mallards, with intact seed retrieval and subsequent successful germination of up to 32% of the ingested seeds. The species that pass fastest through the digestive tract of the mallards are retrieved in the greatest numbers (up to 54%) and germinate best (up to 87%). These are the species with the smallest seeds. Seed coat thickness plays only a minor role in determining intact passage through the mallard gut, but determines if ingestion enhances or reduces germination in comparison to control seeds.

4. Model calculations estimate that whereas the largest seeds can hardly be dispersed by mallards, most seeds can be dispersed up to 780 km, and the smallest seeds up to 3000 km, by mallards during migration.

5. Synthesis. This study demonstrates the mechanism underlying successful endozoochorous dispersal of wetland plant seeds by mallards: small seed size promotes rapid, and hence intact and viable, passage through the mallard gut. Mallards can disperse wetland plant seeds of all but the largest-seeded species successfully in relatively large numbers (up to 32% of ingested seeds) over long distances (up to thousands of kilometres) and are therefore important dispersal vectors.

Consequences of intraspecific seed-size variation in Sparganium emersum for dispersal by fish

1. The potential for seed dispersal by fish (ichthyochory) is likely to vary within aquatic plant species, depending on intraspecific variation in phenotypic seed traits.

2. We studied the effect of seed size variation within the unbranched burreed (Sparganium emersum) on the potential for internal dispersal by the common carp (Cyprinus carpio), by feeding them light (< 10 mg), medium (10–20 mg) and heavy ( > 20 mg) seeds, seed mass being positively related to seed size.

3. We hypothesized: (i) that ingestion, retention time, survival during gut passage and viability after gut passage of S. emersum seeds would be affected by seed size; and (ii) that this would translate into intraspecific variation in dispersal probability and dispersal distance among seed size categories.

4. Ingestion was negatively related to seed size, while survival during gut passage was positively related to seed size. Seed viability after gut passage was not affected by seed size. Since the negative effect of ingestion was counterbalanced by an equally strong but positive effect on seed survival, the probability of dispersal did not differ between the tested seed-size categories.

5. The time that seeds remained in the digestive tract of carp did not differ between seed sizes, suggesting equal potential dispersal distances for all seeds. Based on optimum swimming speeds of carp, ranging from 0·9 to 1·8 km h−1, maximum dispersal distances will most likely range from 13·5 to 27 km.

6. This study highlights the importance of studying all stages of the endozoochorous dispersal process in order to estimate the effect of a phenotypic seed trait on plant dispersal.

The effect of seed morphology on the potential dispersal of aquatic macrophytes by the common carp (Cyprinus carpio)

1. The potential for seed dispersal by fish (ichthyochory) will vary among aquatic plants because of differences in seed size and morphology.

2. To examine how seed morphology influences the probability of dispersal by the common carp (Cyprinus carpio), we studied seed ingestion, retention time and subsequent egestion and germination of seeds of Sparganium emersum and Sagittaria sagittifolia, two aquatic plant species with similar sized but morphologically different seeds.

3. We compared dispersal probabilities between the two plant species, in which the probability of dispersal is assumed to be a function of the probabilities of seed ingestion, egestion and germination, and the dispersal distance is assumed to be a function of seed egestion rate over time.

4. We found that, although the soft seeds of S. sagittifolia had an approximately 1.5 times higher probability of being ingested by the carp than the hard seeds of S. emersum (83.15% ± 1.8% versus 56.16% ± 2.7%, respectively), the latter had an almost twofold higher probability of surviving the passage through the digestive tract (38.58% ± 2.7% versus 20.97% ± 1.5%, respectively). Patterns of seed egestion over time did not differ between the two plant species, despite the difference in seed morphology. Gut passage had a different effect on seed germination between plant species. Compared with non-ingested controls, seeds of S. emersum showed a 12.6% increase in germination and a 2.1 day acceleration in germination rate, whereas seeds of S. sagittifolia displayed a 47.3% decrease and 5.1 day delay, respectively.

5. Our results suggest that seed morphology affects the dispersal probability and postdispersal establishment, but not the dispersal distance, of aquatic plants that are dispersed by fish.

Effect of nano-Al2O3 addition on the densification of YSZ electrolytes

This work investigates the effect of nanosized Al2O3 addition on the sinterability of YSZ electrolyte. (1-x)YSZ + Al2O3 ceramics with compositions x = 0 to 0.01 were prepared by the conventional mixed oxide route from a commercial powder suspension (particle size <50 nm), and sintered at 1200 to 1500 degrees C for 2 hours in air. Densification, phase evolution, and microstructure were characterized by SEM/EDS and XRD. An improvement in sintered density was observed for the samples with 0.2 to 0.5 mol% Al2O3, though depending on the sintering temperature. Only cubic zirconia was detected as crystalline phase, although XRD features suggested chemical interactions depending upon the amount of Al2O3. The grain size of YSZ was homogeneous and no second phase segregation was detected in the tested range of incorporated nano-Al2O3 and sintering temperatures.

Ecological attributes of strategic land acquisitions for addition to Victoria’s public protected area estate (2006-2007)

The development of a comprehensive, adequate and representative reserve system is the key objective of the National Reserve System, and is supported by all Australian States and Territories. In Victoria, the purchase of private land for incorporation into the parks and reserves system assists in the protection of some of the State’s most endangered ecosystems. This article outlines the ecological attributes of private land purchased for addition to the Victorian public protected area system in 2006 and 2007.

Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees

Improving drought resistance of rubber trees has become a pressing issue with the extension of rubber plantations and the prevalence of seasonal drought. Root system is vital to water and nutrients uptake of all plants, therefore, rootstocks could play decisive roles in drought resistance of grafted rubber trees on a specific scion clone. To investigate the responses of different clone rootstocks and their grafted trees to water stress and find applicable methods for selecting drought resistant rootstocks, seven related parameters and root hydraulic properties of both seeds originated and grafted saplings of PB86, PR107, RRIM600 and GT1 were measured to assess their drought resistance. It was shown that the rootstock drought resistance and root hydraulic conductance may improve the drought resistance of the grafted rubber trees. Among the four clone rootstocks, GT1, which demonstrated more resistant to drought and higher root hydraulic conductance, was comparatively resistant to drought both for the seed propagation seedlings and grafted saplings. In addition, studies on the grafted saplings with different root hydraulic conductance further validated the possibility of selecting drought resistant rootstocks on the basis of rootstock hydraulic conductance using a high-pressure flow meter.