Stimulation of calcineurin Aα activity attenuates muscle pathophysiology in mdx dystrophic mice

Calcineurin activation ameliorates the dystrophic pathology of hindlimb muscles in mdx mice and decreases their susceptibility to contraction damage. In mdx mice, the diaphragm is more severely affected than hindlimb muscles and more representative of Duchenne muscular dystrophy. The constitutively active calcineurin A transgene (CnA) was overexpressed in skeletal muscles of mdx (mdx CnA*) mice to test whether muscle morphology and function would be improved. Contractile function of diaphragm strips and extensor digitorum longus and soleus muscles from adult mdx CnA* and mdx mice was examined in vitro. Hindlimb muscles from mdx CnA* mice had a prolonged twitch time course and were more resistant to fatigue. Because of a slower phenotype and a decrease in fiber cross-sectional area, normalized force was lower in fast- and slow-twitch muscles of mdx CnA* than mdx mice. In the diaphragm, despite a slower phenotype and a 35% reduction in fiber size, normalized force was preserved. This was likely mediated by the reduction in the area of the diaphragm undergoing degeneration (i.e., mononuclear cell and connective and adipose tissue infiltration). The proportion of centrally nucleated fibers was reduced in mdx CnA* compared with mdx mice, indicative of improved myofiber viability. In hindlimb muscles of mdx mice, calcineurin activation increased expression of markers of regeneration, particularly developmental myosin heavy chain isoform and myocyte enhancer factor 2A. Thus activation of the calcineurin signal transduction pathway has potential to ameliorate the mdx pathophysiology, especially in the diaphragm, through its effects on muscle degeneration and regeneration and endurance capacity.

Analogue stress

Made from reworked and reanimated found industrial and discarded personal footage. The main focus is the soundtrack which has been reconstructed from scratches, pen marks, Letraset strips and the music and phrases of found films.

Published versions: #1, #2, #3 are all slightly different to each other.

Should capillary blood glucose measurements be used in population surveys?

Objective
To determine the accuracy and appropriateness of capillary blood glucose testing in population surveys.
Materials and methods
Capillary blood glucose using the Rochec ACCU-CHEK instrument and Advantage 11 Test Strips was compared to a laboratory instrument. Three independent cross-sectional risk factor surveys (n=1432) and baseline individuals from the Greater Green Triangle Diabetes Prevention Project (n=341) provided both fasting plasma and capillary blood glucose measurements. Accuracy of capillary glucoses was assessed using the ISO 15197 standard. The median age of the participants was 71years, ranging from 25 to 84years. There were 799 males and 974 females.
Results
Capillary glucose method had poorer precision at lower concentrations (CV: 9.50%, mean=3.09mmol/L, CV: 4.90%, mean=16.78mmol/L, n=233 replicates). Individual discrepancies were seen across the measuring range (2.8–19.9mmol/L, n=1773). In total, 94.5% of results fell within the minimum acceptable accuracy standards. This was slightly short of the 95% of results required to meet the ISO 15197 standard. The prevalence of diabetes in the study population using glucose 7.0mmol/L was 2.4% (95%CI 1.8–3.3%) according to fasting plasma glucose and 2.8% (2.1–3.8%) according to fasting capillary glucose. The lower WHO-defined cut-off of 6.1mmol/L for capillary blood glucose testing gave a prevalence of 10.7% (9.0–12.5%).
Conclusions
This study of matched capillary and plasma glucose results concludes that while it is appropriate to use fasting capillary glucose levels to determine the prevalence of diabetes in populations, it should not be used to reliably diagnose diabetes in individuals.

Conservation ecology and breeding biology of the white-browed treecreeper, Climacteris affinis

The White-browed Treecreeper Climacteris affinis is one of many woodland-dependent birds that are at risk from the encroachment of human-dominated land-uses into natural landscapes. The White-browed Treecreeper inhabits semi-arid woodlands in north-west Victoria, Australia, a vegetation community that has undergone extreme modification in the last century due to the expansion of agriculture in the region. Extant woodlands represent only 10% of the original woodland cover in the region, and are highly fragmented and disturbed in many districts. Thus, the survival of the White-browed Treecreeper may depend on active management. However, current knowledge of the ecology and biology of this species is virtually non-existent, and inadequate for informed and effective conservation actions. The aim of this thesis is to redress this situation and provide the ecological basis for sound conservation management of the species. The thesis consists of two parts: an investigation of habitat use at three spatial scales and a study of the social organization, nesting requirements, breeding behaviour and reproductive success of a population of White-browed Treecreepers. Fifty-six patches of remnant woodland in north-west Victoria were surveyed to determine the factors affecting the occurrence of the White-browed Treecreeper at the regional scale. It was detected in 16 patches, and was largely confined to two core districts - Yarrara and, Wyperfeld (Pine Plains). The floristic composition of the dominant tree species was an important determinant of patch occupancy, with the results providing quantitative support for the previously suspected affinity for Belah Casuarina pauper and Slender Cypress-pine Callitris gracilis — Buloke Allocasuarina luehmannii woodlands. However, the absence of the White-browed Treecreeper from several districts was due to factors other than a lack of appropriate habitat. Demographic isolation - the distance from the focal patch to the nearest population of the White-browed Treecreeper - was the most important variable in explaining variation in patch occupancy. Patches isolated from other treecreeper populations by more than 8.3 km in landscapes of non-preferred native vegetation, and 3 km in agricultural landscapes, were unlikely to support the White-browed Treecreeper. The impact of habitat loss and fragmentation on the capacity of individuals to move through the landscape (i.e. functional connectivity) is considered in relation to disruption to dispersal and migration, and the potential collapse of local metapopulations. Habitat use was then examined in a network of patches and linear strips of Belah woodland embedded in a predominantly cultivated landscape. A minimum area of 18.5 ha of Belah woodland was identified as the most important criterion for patch occupancy at the local scale. This landscape appeared to be permeable to movement by the White-browed Treecreeper, facilitated by the extensive network of linear habitat, and clusters of small to medium fragments. The third scale of habitat use investigated the frequency of use of 1-ha plots within tracts of occupied woodland. It is important to discriminate between habitat traits that operate at the population level, and those that act as proximate cues for habitat selection by individuals. Woodlands that have high tree density, extensive cover of low-stature shrubs, abundant lichen, a complex vertical structure, and relatively low cover of grass and herbs are likely to support larger populations of the White-browed Treecreeper. However, individuals appeared to be using tree dominance (positive) and tall shrub cover (negative) as proximate environmental stimuli for habitat selectivity. A relatively high cover of ground lichen, which probably reflects a ground layer with low disturbance and high structural complexity, was also a reliable indicator of habitat use. Predictive models were developed which could be used to plan vegetation management to enhance habitat for the White-browed Treecreeper. The results of the regional, landscape and patch-scale investigations emphasise that factors operating at multiple spatial scales influence the suitability of remnant vegetation as habitat for the White-browed Treecreeper. The White-browed Treecreeper is typical of many small Australian passerines in that it has high annual survival, small clutches, a long breeding season, multiple broods and relatively low reproductive rates. Reproductive effort is adjusted through the number of clutches laid rather than clutch size. They occupy relatively large, all-purpose territories throughout the year. However, unlike many group territorial birds, territory size was not related to the number of occupants. The White-browed Treecreeper nests in tree hollows. They select hollows with a southerly orientation where possible, and prefer hollows that were higher from the ground. At Yarrara, there was considerable spatial variation in hollow abundance that, in concert with territorial constraints, restricted the actual availability of hollows to less than the absolute abundance of hollows. Thus, the availability of suitable hollows may limit reproductive productivity in some territories, although the magnitude of this constraint on overall population growth is predicted to be small. However, lack of recruitment of hollow-bearing trees would increase the potential for hollow availability to limit population growth. This prospect is particularly relevant in grazed remnants and those outside the reserve system. Facultative cooperative breeding was confirmed, with groups formed through male philopatry. Consequently, natal dispersal is female-biased, although there was no skew in the sex ratio of the fledglings or the general adult population. Helpers were observed performing all activities associated with parenting except copulation and brooding. Cooperatively breeding groups enjoyed higher fledgling productivity than simple pairs, after statistically accounting for territory and parental quality. However, the difference reflected increased productivity in the 1999-breeding season only, when climatic conditions were more favourable than in 1998. Breeding commenced earlier in 1999, and all breeding units were more likely to attempt a second brood. However, only breeders with helpers were successful in fledging second brood young, and it was this difference that accounted for the overall discrepancy in productivity. The key mechanism for increased success in cooperative groups was a reduction hi the interval between first and second broods, facilitated by compensatory reductions in the level of care to the first brood. Thus, females with helpers probably achieved significant energetic savings during this period, which enabled them to re-lay sooner. Furthermore, they were able to recommence nesting when the fledglings from the first brood were younger because there were more adults to feed the dependent juveniles. The current utility, and possible evolutionary pathways, of cooperative breeding is examined from the perspective of both breeders and helpers. Breeders benefit through enhanced fledgling productivity in good breeding conditions and a reduction in the burden of parental care, which may impart significant energetic savings. Further, breeders may facilitate philopatry as a means for ensuring a minimum level of reproductive success. Helpers benefit through an increase in their inclusive fitness in the absence of opportunities for independent breeding (i.e. ecological constraints) and access to breeding vacancies in the natal or adjacent territories (i.e. benefits of philopatry). However, the majority of breeding unit-years comprised unassisted breeders, which suggests that pairs are selectively favoured under certain environmental or demographic conditions.

Ecological value of riparian zones to birds in forest landscapes

Riparian zones are a characteristic component of many landscapes throughout the world and increasingly are valued as key areas for biodiversity conservation. Their importance for bird communities has been well recognised in semi-arid environments and in modified landscapes where there is a marked contrast between riparian and adjacent non-riparian vegetation. The value of riparian zones in largely intact landscapes with continuous vegetation cover is less well understood. This research examined the importance of riparian habitats for avifauna conservation by investigating the ecological interactions contributing to the pattern of bird assemblages in riparian and adjacent non-riparian habitats. Specifically, the focus is on the bird assemblages of riparian zones and those of adjacent non-riparian vegetation types and the influence that associated differences in resource availabilities, habitat structure and conditions have on observed patterns. This study was conducted in the foothill forests of the Victorian Highlands, south-east Australia. Mixed-species eucalypt (genus Eucalyptus) forests dominate the vegetation of this region. Site selection was based on the occurrence of suitable riparian habitat interspersed within extensive, relatively undisturbed (i.e. no recent timber harvesting or fire events) forest mosaics. A series of 30 paired riparian and non-riparian sites were established among six stream systems in three forest areas (Bunyip State Park, Kinglake National Park and Marysville State Forest). Riparian sites were positioned alongside the stream and the non-riparian partner site was positioned on a facing slope at a distance of approximately 750 m. Bird surveys were carried out during 29 visits to each site between July 2001 and December 2002. Riparian sites were floristically distinct from non-riparian sites and had a more complex vegetation structure, including a mid-storey tree layer mostly absent from non-riparian sites, extensive fine litter and coarse woody debris, and dense ground-layer vegetation (e.g. sedges and ground ferns). The characteristic features of non-riparian habitats included a relatively dense canopy cover, a ground layer dominated by grasses and fine litter, and a high density of canopy-forming trees in the smaller size-classes. Riparian zones supported a significantly greater species richness, abundance and diversity of birds when compared to non-riparian habitats. The composition of bird assemblages differed significantly between riparian and non-riparian habitats, with riparian assemblages displaying a higher level of similarity among sites. The strongest contributors to observed dissimilarities between habitat types included species that occurred exclusively in either habitat type or species with large contrasts in abundance between habitat types. Much of the avifauna (36%) of the study area is composed of species that are common and widespread in south-east Australia (i.e. forest generalists). Riparian habitats were characterised by a suite of species more typical of wetter forest types in south-east Australia and many of these species had a restricted distribution in the forest mosaic. Some species (7%) occurred exclusively in riparian habitats (i.e. riparian selective species) while others (43%) were strongly linked to these habitats (i.e. riparian associated species). A smaller proportion of species occurred exclusively (2%) in non-riparian habitats (i.e. non-riparian selective species) or were strongly linked to these habitats (10%; i.e. non-riparian associated species). To examine the seasonal dynamics of assemblages, the variation through time in species richness, abundance and composition was compared between riparian and non-riparian sites. Riparian assemblages supported greater richness and abundance, and displayed less variation in these parameters, than non-riparian assemblages at all times. The species composition of riparian assemblages was distinct from non-riparian assemblages throughout the annual cycle. An influx of seasonal migrants elevated species richness and abundance in the forest landscape during spring and summer. The large-scale movement pattern (e.g. coastal migrant, inland migrant) adopted by migrating species was associated with their preference for riparian or non-riparian habitats in the landscape. Species which migrate north-south along the east coast of mainland Australia (i.e. coastal migrants) used riparian zones disproportionately; eight of eleven species were riparian associated species. Species which migrate north-south through inland Australia (i.e. inland migrants) were mostly associated with non-riparian habitats. The significant differences in the dynamics of community structure between riparian and non-riparian assemblages shows that there is a disproportionate use of riparian zones across the landscape and that they provide higher quality habitat for birds throughout the annual cycle. To examine the ecological mechanisms by which riparian assemblages are richer and support more individual birds, the number of ecological groups (foraging, nest-type and body mass groups) represented, and the species richness of these groups, was compared between riparian and non-riparian assemblages. The structurally complex vegetation and distinctive habitat features (e.g. aquatic environments, damp sheltered litter) provided in the riparian zone, resulted in the consistent addition of ecological groups to riparian assemblages (e.g. sheltered ground – invertebrates foraging group) compared with non-riparian assemblages. Greater species richness was accommodated in most foraging, nest-type and body mass groups in riparian than non-riparian assemblages. Riparian zones facilitated greater richness within ecological groups by providing conditions (i.e. more types of resources and greater abundance of resources) that promoted ecological segregation between ecologically similar species. For a set of commonly observed species, significant differences in their use of structural features, substrates and heights were registered between riparian and non-riparian habitats. The availability and dynamics of resources in riparian and non-riparian habitats were examined to determine if there is differential availability of particular resources, or in their temporal availability, throughout the annual cycle. Riparian zones supported more abundant and temporally reliable eucalypt flowering (i.e. nectar) than non-riparian habitats throughout the annual cycle. Riparian zones also supported an extensive loose bark resource (an important microhabitat for invertebrates) including more peeling bark and hanging bark throughout the year than at non-riparian sites. The productivity of eucalypts differed between habitat types, being higher in riparian zones at most times for all eucalypts combined, and for some species (e.g. Narrow-leaved Peppermint Eucalyptus radiata). Non-riparian habitats provided an abundant nectar resource (i.e. shrub flowering) at particular periods in the annual cycle. Birds showed clear relationships with the availability of specific food (i.e. nectar) and foraging resources (i.e. loose bark). The demonstration of a greater abundance of resources and higher primary productivity in riparian zones is consistent with the hypothesis that these linear strips that occupy only a small proportion of the landscape have a disproportionately high value for birds. Riparian zones in continuous eucalypt forest provide high quality habitats that contribute to the diversity of habitats and resources available to birds in the forest mosaic, with positive benefits for the landscape-level species pool. Despite riparian and non-riparian habitat supporting distinct assemblages of birds, strong linkages are maintained along the riparian-upslope gradient. Clearly, the maintenance of diverse and sustainable assemblages of birds in forest landscapes depends on complementary management of both riparian and non-riparian vegetation.

Evaluating lubricants in sheet metal forming

The sheet metal forming process basically involves the shaping of sheet metal of various thickness and material properties into the desired contours. This metal forming process has been extensively used by the automotive industry to manufacture both car panels and parts. Over the years numerous investigations have been conducted on various aspects of the manufacturing process with varied success. In recent years the requirements on the sheet metal forming industry have headed towards improved stability in the forming process while lowering environmental burdens. Therefore the overall aim of this research was to identify a technique for developing lubricant formulations that are insensitive to the sheet metal forming process. Due to the expense of running experiments on production presses and to improve time efficiency of the process the evaluation procedure was required to be performed in a laboratory. Preliminary investigations in the friction/lubricant system identified several laboratory tests capable of measuring lubricant performance and their interaction with process variables. However, little was found on the correlation between laboratory tests and production performance of lubricants. Therefore the focus of the research switched to identifying links between the performance of lubricants in a production environment and laboratory tests. To reduce the influence of external parameters all significant process variables were identified and included in the correlation study to ensure that lubricant formulations could be desensitised to all significant variables. The significant process variables were found to be sensitive to die position, for instance: contact pressure, blank coating of the strips and surface roughness of the dies were found significant for the flat areas of the die while no variables affected friction when polished drawbeads were used. The next phase was to identify the interaction between the significant variables and the main lubricant ingredient groups. Only the fatty material ingredient group (responsible for the formation of boundary lubricant regimes) was found to significantly influence friction with no interaction between the ingredient groups. The influence of varying this ingredient group was then investigated in a production part and compared to laboratory results. The correlation between production performance and laboratory tests was found to be test dependant. With both the Flat Face Friction test and the Drawbead Simulator unaffected by changes in the lubricant formulation, while the Flat Bottom Cup test showing similar results as the production trial. It is believed that the lack of correlation between the friction tests and the production performance of the lubricant is due to the absence of bulk plastic deformation of the strip. For this reason the Ohio State University (OSU) friction test was incorporated in the lubricant evaluation procedure along with a Flat Bottom Cup test. Finally, it is strongly believed that if the lubricant evaluation procedure highlighted in this research is followed then lubricant formulations can be developed confidently in the laboratory.

Ecology of arboreal marsupials in a network of remnant linear habitats

Linear strips of vegetation set within a less-hospitable matrix are common features of landscapes throughout the world. Depending on location, form and function, these linear landscape elements include hedgerows, fencerows, shelterbelts, roadside or streamside strips and wildlife corridors. In many anthropogenically-modified landscapes, linear strips are important components for conservation because they provide a large proportion of the remaining wooded or shrubby habitat for fauna. They may also function to provide connectivity across the landscape. In some districts, the linear strips form an interconnected network of habitat. The spatial configuration of remnant habitat (size, shape and arrangement) may influence habitat suitability, and hence survival, of many species of plant and animal in modified landscapes. Near Euroa in south-eastern Australia, the clearing and fragmentation of temperate woodlands for agriculture has been extensive and, at present, less than 5% tree cover remains, most of which (83%) occurs as linear strips along roads and streams. The remainder of the woodland occurs as relatively small patches and single isolated trees scattered across the landscape. As an assemblage, arboreal marsupials are woodland dependent and vary in their sensitivity to habitat loss and fragmentation. This thesis focusses on determining the conservation status of arboreal marsupials in the linear network and understanding how they utilise the landscape mosaic. Specifically, the topics examined in this thesis are: (1) the composition of the arboreal marsupial assemblage in linear and non-linear woodland remnants; (2) the status and habitat preferences of species of arboreal marsupial within linear remnants; and (3) the ecology of a population of the Squirrel Glider Petaurus norfolcensis in the linear network, focusing on population dynamics, spatial organisation, and use of den trees. The arboreal marsupial fauna in the linear network was diverse, and comprised seven out of eight species known to occur in the district. The species detected within the strips were P. norfolcensis, the Sugar Glider Petaurus breviceps, Common Brushtail Possum Trichosums vulpecula, Common Ringtail Possum Pseudocheirus peregrinus, Brush-tailed Phascogale Phascogale tapoatafa, Koala Phascolarctos cinereus and Yellow-footed Antechinus Antechinus flavipes. The species not detected was the Feathertail Glider Acrabates pygmaeus. Survey sites in linear remnants (strips of woodland along roads and streams) supported a similar richness and density of arboreal mammals to sites in non-linear remnants (large patches or continuous tracts of woodland nearby). Furthermore, the combined abundance of all species of arboreal marsupials was significantly greater in sites in the linear remnants than in the non-linear remnants. This initial phase of the study provided no evidence that linear woodland remnants support a degraded or impoverished arboreal marsupial fauna in comparison with the nonlinear remnants surveyed. Intensive trapping of arboreal marsupials within a 15 km linear network between February 1997 and June 1998 showed that all species of arboreal marsupial (except A. pygmaeus) were present within the linear strips. Further analyses related trap-based abundance estimates to measures of habitat quality and landscape structure. Width of the linear habitat was significantly positively correlated with the combined abundance of all arboreal marsupials, as well as with the abundance of P. norfolcensis and T. vulpecula. The abundance of T. vulpecula was also significantly positively correlated with variation in overstorey species composition, Acacia density and the number of hollow-bearing trees. The abundance of P. norfolcensis was positively correlated with Acacia density and canopy width, and negatively correlated with distance to the nearest intersection with another linear remnant. No significant variables were identified to explain the abundance of P. tapoatafa, and there were insufficient captures of the remaining species to investigate habitat preferences. Petaurus norfolcensis were resident within the linear network and their density (0.95 -1.54 ha-1) was equal to the maximum densities recorded for this species in continuous forest elsewhere in south-eastern Australia. Rates of reproduction were also similar to those in continuous forest, with births occurring between May and December, a mean natality rate of 1.9, and a mean litter size of 1.7. Sex ratios never differed significantly from parity. Overall, the population dynamics of P. norfolcensis were comparable with published results for the species in contiguous forest, clearly suggesting that the linear remnants currently support a self-sustaining, viable population. Fifty-one P. norfolcensis were fitted with radio transmitters and tracked intermittently between December 1997 and November 1998. Home ranges were small (1.3 - 2.8 ha), narrow (20 - 40 m) and elongated (322 - 839 m). Home ranges were mostly confined to the linear remnants, although 80% of gliders also utilised small clumps of adjacent woodland within farm paddocks for foraging or denning. Home range size was significantly larger at intersections between two or more linear remnants than within straight sections of linear remnants. Intersections appeared to be important sites for social interaction because the overlap of home ranges of members of adjacent social groups was significantly greater at intersections than straight sections. Intersections provided the only opportunity for members of three or more social groups to interact, while still maintaining their territories. The 51 gliders were radiotracked to 143 different hollow-bearing trees on 2081 occasions. On average, gliders used 5.3 den trees during the study (range 1-15), and changed den trees every 4.9 days. The number of den trees used by each glider is likely to be conservative because the cumulative number of den trees continued to increase over the full duration of the study. When gliders shifted between den trees, the mean distance between consecutive den sites was 247 m. Den trees were located throughout a glider's home range, thereby reducing the need to return to a central den site and potentially minimising energy expenditure. Dens were usually located in large trees (mean diameter 88.5 cm) and were selected significantly more often than expected based on their occurrence within the landscape. The overall conclusion of this thesis is that the linear network I studied provides high quality habitat for resident populations of arboreal marsupials. Important factors influencing the suitability of the linear remnants appear to be the high level of network connectivity, the location on soils of high nutrient status, the high density of large trees and an acacia understorey. In highly fragmented landscapes, linear habitats as part of the remaining woodland mosaic have the potential to be an integral component in the conservation of woodland-dependent fauna. The habitat value of linear strips of vegetation should not be underestimated.

Information-based regulation of high-velocity foot-targeting tasks

Judging time-to-contact with a target is an important criterion for avoiding harm in everyday walking and running tasks, and maximizing performance in high-velocity sporting tasks. The information-based regulation of step length and duration during target-directed locomotion was examined in relation to gait mode, approach velocity, target task, expertise, and sporting performance during a series of four experiments. The first three experiments examined novice performers (Each n=12, 6 males, 6 females), whilst the last experiment examined expert gymnasts (n=5). Two reference strips with alternating 50cm black and white intervals were placed on either side of the approach strip for all of the experiments. One 50Hz-panning video camera filmed the approach from an elevated position. In Experiment 4, two stationary 250Hz cameras filmed the post-flight performance of the gymnastic vaults and, in addition, two qualified judges provided a performance score for each vaulting trial. The panning video footage in each experiment was digitized to deduce the gait characteristics. In Experiment 4, the high-speed video footage was analyzed three-dimensionally to obtain the performance measures such as post-flight height. The utilization of visual stimulus in target-directed locomotion is affected by the observer's state of motion as characterized by the mode of locomotion and also often the speed of locomotion. In addition, experience plays an important role in the capacity of the observer to utilize visual stimulus to control the muscular action of locomotion when either maintaining or adjusting the step mechanics. The characteristics of the terrain and the target also affect the observer's movement. Visual regulation of step length decreases at higher approach speeds in novice performers, where as expert performers are capable of increasing visual regulation at higher approach speeds. Conservatism in final foot placement by female participants accounts for the observed increase in distance from the critical boundary of the obstacle relative to toe placement. Behavioural effects of gender thus affect the control of final foot placement in obstacle-directed locomotion. The visual control of braking in target-directed locomotion is described by a tau-dot of-0.54. When tau-dot is below -0.54 a hard collision with the obstacle will occur, however, when tau-dot is above -0.54, a soft collision with the target will occur. It is suggested that the tau-dot margin defining the control of braking reveals the braking capacity of the system. In the target-directed locomotion examined a tau-dot greater than -0.70 would possibly exceed the braking capacity of the system, thus, leading to injury if performed. The approach towards the take-off board and vaulting horse in gymnastics is an example of target-directed locomotion in sport. Increased visual regulation of the timing and length of each step is a requirement for a fast running approach, a fundamental building block for the execution of complex vaults in gymnastics. The successful performance of complex vaults in gymnastics leads towards a higher judge's score. Future research suggestions include an investigation of visual regulation of step length in curved target-directed locomotion.

Experiments with stochastic processes : facade subdivision based on wind motion

Constraint based tools for architectural design exploration need to satisfy aesthetic and functional criteria as well as combine discrete and continuous modes of exploration. In this paper, we examine the possibilities for stochastic processes in design space exploration.

Specifically, we address the application of a stochastic wind motion model to the subdivision of an external building envelope into smaller discrete components. Instead of deterministic subdivision constraints, we introduce explicit uncertainty into the system of subdivision. To address these aims, we develop a model of stochastic wind motion; create a subdivision scheme that is governed by the wind model and explore a design space of a facade subdivision problem. A discrete version of the facade, composed of light strips and panels, based on the bamboo elements deformed by continuous wind motion, is developed. The results of the experiments are presented in the paper.

Approach for testing the material behavior in roll forming in a small scale

Roll forming of ultra-high strength steels (UHSS) and other high strength alloys is an advanced manufacturing methodology with the ability of cold forming those materials to complex three-dimensional shapes for lightweight structural applications. Due to their high strength, most of these materials have a reduced ductility which excludes conventional sheet forming methods under cold forming conditions. Roll forming is possible due to its low strains and incremental forming characteristic. Recent research investigates the development of high strength nano-structured aluminum sheet and titanium alloys, as well as their behaviour in roll forming with regard to formability, material behaviour and shape defects. The development of new materials is often limited to small scale samples due to the high preparation costs. In contrast, industrial application needs larger scale tests for validation, especially in roll forming where a minimum sheet length is required to feed the sample trough the roll forming machine. This work describes a novel technique for studying roll forming of a short length of experimental material. DP780 steel strips (500mm – 1300mm length) were welded between two mild steel carrier sheets of similar width and thickness giving an overall strip length of 2m. Roll forming trials were performed and longitudinal edge strain, bow and springback determined on the welded samples and samples formed of full length DP780 strip before and after cut off. The experimental results of this work show that this method gives a reasonable approach for predicting material behavior in roll forming transverse to the rolling direction. In contrast to that significant differences in longitudinal bow were observed between the welded sections and the sections formed of full length DP780 strip; this indicates that the applicability of this method is limited with regard to predicting longitudinal material behavior in roll forming.

Development of an inverse routine to predict residual stresses in the material based on a bending test

Bending and reverse bending are the dominant material deformations in roll forming, and hence property data derived from bend tests could be more relevant than tensile test data for numerical simulation of a roll forming process. Recent investigations have shown that residual stresses change the material behavior close to the yield in a bending test. So, residual stresses introduced during prior steel processing operations may affect the roll forming process, and therefore they need to be included in roll forming simulations to achieve improved model accuracy. Measuring the residual stress profile experimentally is time consuming and has limited accuracy while analytical models that are available require detailed information about the pre-processing conditions that is generally not available for roll forming materials. The main goal of this study is to develop an inverse routine that determines a residual stress profile through the material thickness based on experimental pure bend test data. A numerical model of the skin passing (temper rolling) process is performed to introduce a residual stress profile in DP780 steel sheet. The skin passed strips are used in a pure bending simulation to record moment-curvature data and this data is then applied in an inverse analysis to predict the residual stress profile in the material. Comparison of the residual stress profile predicted by the inverse routine with that calculated by finite element analysis (FEA) indicates an inverse approach combined with pure bend test may present an alternative to predict residual stresses in sheet metals.

Riparian vegetation has disproportionate benefits for landscape-scale conservation of woodland birds in highly modified environments

1. Identifying landscape patterns that allow native fauna to coexist with human land use is a global challenge. Riparian vegetation often persists in anthropogenic environments as strips of natural or semi-natural vegetation that provide habitat for many terrestrial species. Its relative contribution to landscape-scale conservation is likely to change as environments become increasingly modified. We used a ‘whole of landscape’ approach to test the hypothesis that riparian vegetation offers disproportionate benefits, relative to non-riparian vegetation, for the conservation of woodland birds in highly modified agricultural landscapes. 2. We selected 24 landscapes, each 100 km2, along a gradient of landscape change represented by decreasing cover of native vegetation (from 60% to <2%), in an agricultural region in SE Australia. Bird species were systematically surveyed at three riparian and seven non-riparian sites in wooded vegetation in each landscape. 3. Riparian sites supported a greater richness of woodland-dependent species, a group of conservation concern, than did non-riparian sites. The composition of assemblages also differed between site types. 4. At the landscape scale, the pooled richness of bird assemblages at riparian and non-riparian sites, respectively, decreased with overall loss of tree cover despite constant sampling effort. Within landscapes, the β-diversity of woodland species among non-riparian sites increased (composition became less similar) as landscape tree cover declined. In contrast, riparian assemblages were relatively stable with no change in β-diversity. Importantly, as landscape tree cover declined, the proportion of woodland species uniquely present at riparian sites increased and made a greater contribution to overall landscape diversity. 5. Synthesis and applications. Landscape-scale richness of woodland species declines as landscape tree cover is lost. In highly depleted landscapes, riparian vegetation retains a relatively rich, stable assemblage compared with that in heterogeneous remnants of non-riparian vegetation and consequently contributes disproportionately to landscape-scale diversity. These observations, together with the diverse benefits of riparian vegetation for aquatic ecosystems, mean that protection and restoration of riparian vegetation is a high priority in anthropogenic environments. Importantly, such actions are directly amenable to individual land managers, and the benefits will accumulate to enhance the persistence and conservation of species at landscape and regional scales.

An experimental investigation of edge strain and bow in roll forming a V-section

V-sections were roll formed from two grades of steel, and the strain on the top and bottom of the strip near the edge was measured using electrical resistance strain gauges. The channels were bent to a radius of 2 and 15 mm along the centerline. The steel strips were of mild and dual phase steel of yield strength 367 MPa and 597 MPa respectively. The longitudinal bow was measured using a 3-dimensional scanning system. The strain measurements were analysed to determine bending and mid-surface strains at the edge during forming. The peak longitudinal edge strain increased with material yield strength for both profile radii. For the 15 mm radius, the bow was larger in the dual phase steel than in the mild steel. For the 2 mm profile radius, the bow was smaller compared with the 15 mm profile radius and it was similar for both steels. It was observed that the difference between the peak longitudinal edge strain and yield strength to Youngs modulus ratio of the material is an important factor in determining longitudinal bow.

Freshwater influences on hydrology and seagrass dynamics of intermittent estuaries

Many temperate estuaries have intermittently open and closed mouths, a feature that is often related to intermittent freshwater input. These systems, often overlooked due to their small size, can have large hydrological variability over medium-term time scales.

This variability presents potential difficulties for estuarine species particularly where anthropogenic alterations to freshwater flows can cause large deviations from natural patterns of tidal influence and inundation of habitat.

Influences of natural and hydrological variability on seagrasses were examined in two central Victorian estuaries with anthropogenically-modified but naturally-intermittent freshwater flows and mouth openings. Comparisons were focused on differences between an estuary with artificially-augmented freshwater inflow and an adjacent system, in which the volume and timing of inflows were altered by a reservoir. Eight additional estuaries in the region were also used to provide a context for these two main sites.

Hydrological changes during the three-year field component were affected by the ending of a drought and then a major flood a year later as well as by ongoing anthropogenic flow reduction and augmentation. These influences on hydrology were associated with an initially high seagrass coverage that was substantially reduced and showed signs of recovery only in the system that was affected by lower inflows. Such influences and responses also changed seasonally but to a much lesser extent than the responses to stochastic climatic events.

Natural flows were intermittent and varied substantially between years. Flooding flows represented up to 89% of the long-term annual average flow. Water quality was broadly typical of the region, with the exception of low pH in some tributaries, especially those of Anglesea estuary. Anthropogenic changes to flow were most evident at times of low natural flows and resulted in longer and more frequent periods of zero inflow to Painkalac estuary and a continual base flow to Anglesea. This base flow, from ponds containing coal ash, neutralised waters flowing from upstream and increased conductivity, except at times of high natural flow.

A three-state conceptual model of the magnitude and variability of water levels, based largely on the degree of tidal influence was identified and quantitatively assessed for the two estuaries that were the main focus of the study. These states in turn had a large influence on the area and inundation of benthic habitat. Floods tended to open the mouths of estuaries, which then remained tidal given sufficient flow to overcome sedimentary processes at the mouths. Low and zero inflow was a precondition for closure of the mouths of the estuaries. When closed, differences in inflow resulted in different endpoints in salinity patterns. From an initial pattern similar to a classic ‘salt wedge’, Painkalac estuary, with reduced inflow, quickly destratified and gradually became more saline, at times hypersaline. Anglesea estuary, with augmented flow, tended to remain stratified for longer until becoming completely fresh, given a long enough period of closure.

Episodic changes in the water quality of the estuaries were associated with different components of the freshwater flow regimes. At high flows, fresh waters of low pH with a high metal load entered Anglesea estuary. Except during the largest flood, when the estuary was completely flushed, this water was neutralised at the halocline and resulting in precipitation of metals. High flows into Painkalac were associated with elevated concentrations of clay-sourced suspended solids. During a closed period, with zero flow, a release of sediment-bound nutrients triggered by anoxia was observed in Painkalac, followed by an algal bloom.

The large decline in seagrass extent that was observed in both estuaries was closely related to floods and the subsequent reductions in potential habitat associated with the tidal states that followed. Analysis of historical patterns of extent against rainfall records suggested that periods of drought and extended mouth closures were related to establishment and expansion of beds. This model was similar to that described for South African estuaries and contrasted with more-seasonal patterns reported for local marine embayments.

Rates of in situ decomposition of seagrass detritus showed a mix of seasonal and disturbance-driven patterns of change, depending on estuary. Variability of these rates on a scale of 100s of metres was typically not significant, but there were a few episodes that were highly significant. A negative correlation between decomposition rate and seagrass extent was also observed. A novel technique for assessing cellulose decomposition potential in sediment, adapted from soil science, proved to be a useful tool for estuarine research. Results from this component of the study highlighted both small-scale variability that was inconsistent through time, and also stable differences in decomposition potential between depths and estuaries that were consistent with differences in hydrological state and salinity.

Given the relative lack of knowledge about processes in intermittent estuaries, particularly those relating to changes in freshwater inflow, results from this study will be of value both locally and for similar systems elsewhere. Locally, it is likely that flow regimes to both Anglesea and Painkalac estuaries will be reduced, following closure of the mine power station at Anglesea and due to increased demand from the reservoir above Painkalac. There is potential to manage flows from each of these sources to minimise downstream effects. Regionally, and globally, there are many intermittent estuaries in areas with Mediterranean-type climates. It has been predicted that the climates of these regions will become drier but with an increase in intensity of storm events, both of which have ramifications for flow regimes to estuaries. It is hoped that results of this study will contribute to more informed management of intermittent estuaries in the context of these likely changes.

Improving performance of CFRP retrofitted RC members using rubber modified epoxy (ongoing research)

Although the method of external attachment of CFRP to the concrete members is the most effective and economical solution for strengthening and repairing concrete structure in the century, the bonding issue between CFRP and the hosting surface still a challenge for the structural engineers. Many solutions are proposed to overcome the early debonding failure in the strengthened members. This paper reports an ongoing experimental program for testing CFRP retrofitted RC beams and slabs. Fifteen RC beams of dimensions 150x250x2300mm and twelve two- way RC slabs of size 85x1670x1670mm will be strengthened using different types of epoxies, different configurations and variable number of layers of CFRP strips (MBrace-230). Rubber modified epoxy will be used for carbon fibre external attachment using wet lay-up method. Loading frame of 500 kN capacity will be used for beams testing. While for applying uniformly distributed load on the slabs a purpose built attachment will be used. The experimental results will report on the ultimate load, failure mode, mid-span deflection, strains readings in different locations and the ductility for both groups of strengthened beams and slabs. A mathematical model will be developed to predict the behavior of RC beams and two-way slabs.