Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites

Natural rubber (NR)/multi-walled carbon nanotube (MWCNTs) composites were prepared bycombining self-assembly and latex compounding techniques. The acid-treated MWCNTs (H2SO4: HNO3=3:1,volume ratio) were self-assembled with poly (diallyldimethylammonium chloride) (PDDA) through electrostaticadhesion. In the second assembling, NR/MWCNTs composites were developed by mixing MWCNTs/PDDAsolution with NR latex. The results show that MWCNTs are homogenously distributed throughout the NRmatrix as single tube and present a great interfacial adhesion with NR phase when MWCNTs contents areless than 3 wt%. Moreover, the addition of the MWCNTs brings about the remarkable enhancement in tensilestrength and crosslink density compared with the NR host, and the data peak at 2 wt% MWCNTs loadings.When more MWCNTs are loaded, aggregations of MWCNTs are gradually generated, and the tensile strengthand crosslink both decrease to a certain extent.

Let them eat cake

Trevor Gale on mobilising appetites for higher education.

Let them eat cake : mobilising appetites for higher education

The Australian Government has set two targets for the nation's universities: (i) increase the proportion of people from low socioeconomic status (SES) backgrounds attending university, to 20 percent of all undergraduate students by 2020; and (ii) increase the proportion of 25 to 34 year-old Australians holding a bachelor's degree, to 40 percent by 2025. Both targets will require an increased effort by governments and universities to enable and encourage more people to access higher education, particularly more from low SES backgrounds. It will also require them to think differently about the problem. Three new concepts are now redefining the equity dimensions of higher education. Despite aspirations to expand the system, students' appetites for university are no longer a given. While universities are seeking to enrol different students in greater numbers, the challenge now is how to give greater voice to this difference. And the limited mobility of students from low SES backgrounds, including those in outer metropolitan and regional areas, is now the most significant indicator of their limited access to higher education and to social mobility. The paper outlines these new conceptions of student equity and how they are informing the research of the National Centre.

Preparation of constant viscosity natural rubber with mercaptan

Constant viscosity natural rubber has been prepared using mercaptan. The accelerated storage tests indicate that the storage hardening phenomenon of natural rubber can be inhibited by mercaptan. The amount of mercaptan (2-mercaptobenzothiazole) of 0.14 phr is sufficient to prepare constant viscosity natural rubber and the storage hardening numbers of constant viscosity NR in both Mooney viscosity and Wallace plasticity are less than 4. The processing properties and anti-oxidative behavior of CV-NR can be improved, although the mechanical properties of vulcanizates decreased slightly as compared to those of natural rubber. The results further support the hypothesis that the abnormal groups in natural rubber molecules are aldehyde groups and are responsible for the hardening of natural rubber.

Structure and thermal stability of natural rubber reinforced with in situ generated zinc sorbate

In situ prepared zinc disorbate (ZDS) in natural rubber (NR) by the reaction of zinc oxide and sorbic acid was used to reinforce the dicumyl peroxide-cured NR vulcanizate. The changes in mechanical properties of NR vulcanizates after ageing and were determined and the structures and thermal stability of vulcanizates were also analyzed using scanning electron microscope and thermal gravimetric analyzer. The change ratios in tensile strength and elongation at break of NR vulcanizate with theoretic formation of ZDS of 21phr can be increased to -33 from -44 and -27 from -38 after ageing and the initial weight loss temperature of NR vulcanizate can be increased for about 7°C as compared to un-reinforced NR vulcanizate, indicating that the antioxidative behavior and thermal stability of NR can be improved significantly with theoretic formation of ZDS of 21phr.

Balsamin, a novel ribosome-inactivating protein from the seeds of Balsam apple Momordica balsamina

Plant seeds, a rich source of proteins, are considered important for their application as functional ingredients in a food system. A novel ribosome-inactivating protein (RIP), balsamin was purified from the seeds of Balsam apple, Momordica balsamina. Balsamin was purified by ion exchange chromatography on CM Sepharose and gel filtration on superdex-75. It has a molecular weight of 28 kDa as shown by SDS-PAGE analysis. Balsamin inhibits protein synthesis in a rabbit reticulocyte lysate-based cell free translation assay with an IC50 of 90.6 ng ml⁻¹. It has RNA N-glycosidase activity and releases a 400-base long fragment termed the Endo fragment from 28S rRNA in the same manner as does saporin-6 from Saponaria officinalis. The N-terminal sequence analysis of the first 12 amino acids of balsamin revealed that it shares 83% similarity with type I RIP α-MMC from Momordica charantia and 50% similarity with β-MMC (from Momordica charantia), bryodin I (from Bryonia dioica) and luffin a (from Luffa cylindrica). Balsamin was further characterized by mass spectrometry. CD spectroscopic studies indicate that secondary structure of balsamin contains helix (23.5%), β-strand (24.6%), turn (20%) and random coil (31.9%). Thus RIPs activity expressed in vegetables like Momordica sp. advocates its usage in diet.

Reinforcement of natural rubber with core-shell structure silica-poly(Methyl Methacrylate) nanoparticles

A highly performing natural rubber/silica (NR/SiO2) nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane-coupling agent. The core-shell structure silica-poly(methyl methacrylate), SiO2-PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2-PMMA and PMMA-modified NR (NR-PMMA). The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.

Rubber latex yield and physiology of rubber tree with tea tree oil treatments

To examine the effects of tea tree oil on rubber latex yield and the resulting latex physiological parameters of rubber tree （Hevea brasiliensis），clean water and 20%，40%，60%，80% and 100% of tea tree oil were applied on the tapping cut of rubber trees. The data were analyzed by Duncan test and its results showed that when compared to clean water （ck），80% and 100% of tea tree oil stimulation significantly promoted rubber latex yield（P＜0.05）. In addition，the latex physiological parameters changed with the sucrose content（P＜0.01），magnesium ion content （P＜0.01） and inorganic phosphorus content （P＜0.01） of latex significantly increasing and thiol content significantly deceasing （P＜0.01）. The effect of tea tree oil treatments on rubber yield was similar to the impact of 0.5% ethrel stimulation. However，compared to ethrel stimulation，100% tea tree oil treatment significantly increased dry rubber and sucrose contents （P＜0.01） and decreased thiol content （P＜0.01）. Thus，tea tree oil treatment involved different latex yield promotion mechanisms than that of ethrel stimulation.