Oxygen reduction reaction activity of La-based perovskite oxides in alkaline medium : a thin-film rotating ring-disk electrode study

In this work, LaMO₃ and LaNi_0.5M_0.5O₃ (M = Ni, Co, Fe, Mn and Cr) perovskite oxide electrocatalysts were synthesized by a combined ethylenediaminetetraacetic acid-citrate complexation technique and subsequent calcinations at 1000 °C in air. Their powder X-ray diffraction patterns demonstrate the formation of a specific crystalline structure for each composition. The catalytic property of these materials toward the oxygen reduction reaction (ORR) was studied in alkaline potassium hydroxide solution using the rotating disk and rotating ring-disk electrode techniques. Carbon is considered to be a crucial additive component because its addition into perovskite oxide leads to optimized ORR current density. For LaMO₃ (M = Ni, Co, Fe, Mn and Cr)), in terms of the ORR current densities, the performance is enhanced in the order of LaCrO₃, LaFeO₃, LaNiO₃, LaMnO₃, and LaCoO3. For LaNi_0.5M_0.5O₃, the ORR current performance is enhanced in the order of LaNi_0.5Fe_0.5O₃, LaNi_0.5Co_0.5O₃, LaNi_0.5Cr_0.5O₃, and LaNi_0.5Mn_0.5O₃. Overall, LaCoO₃ demonstrates the best performance. Most notably, substituting half of the nickel with cobalt, iron, manganese, or chromium translates the ORR to a more positive onset potential, suggesting the beneficial catalytic effect of two transition metal cations with Mn as the most promising candidate. Koutecky–Levich analysis on the ORR current densities of all compositions indicates that the four-electron pathway is favored on these oxides, which are consistent with hydroperoxide ion formation of <2%.

Electrospinning of nanofibre yarns using rotating ring collector

 In this project, a novel ring collector was used to convert newly electrospun nanofibres into yarn. This setup has been designed to separate electrospinning from yarn drafting/twisting in two distinct zones. Three different types of electrospinning systems, i.e. needle, needleless, and needle/needleless hybrid, were utilized to produce nanofibre yarns.

Direct electrospinning of nanofibre yarns using a rotating ring collector

Nanofibres prepared by electrospinning typically have randomly oriented fibrous structure. They have large surface-to-volume (or weight) ratio and excellent porous characteristic, which have shown enormous potential in diverse applications. However, electrospun nanofibres are often prepared in the form of randomly orientated fibrous web, which are fragile and difficult to be tailored in fibrous structures. Herein, we demonstrate a novel yarn electrospinning method which uses a rotating ring collector to convert newly electrospun nanofibres directly into a continuous yarn. The use of ring collector separates the yarn formation from the electrospinning zone. The deposition of later-spun nanofibres to the inner surface of fibrous cone eliminates hooked or curled nanofibres in the final yarn. The effects of polymer concentration and operating parameters on nanofibre and yarn morphology, diameter and the ring collector on yarn twist feature were examined. The nanofibre yarns had a surface twist angle up to 54.4°, and tensile strength as high as 93.6 MPa (elongation at break 242.6%). Increasing twist levels improves tensile strength and strain values.

Explicit invariant solutions associated with nonlinear atmospheric flows in a thin rotating spherical shell with and without west-to-east jets perturbations

A class of non-stationary exact solutions of two-dimensional nonlinear Navier–Stokes (NS) equations within a thin rotating spherical shell were found as invariant and approximately invariant solutions. The model is used to describe a simple zonally averaged atmospheric circulation caused by the difference in temperature between the equator and the poles. Coriolis effects are generated by pseudoforces, which support the stable west-to-east flows providing the achievable meteorological flows. The model is superimposed by a stationary latitude dependent flow. Under the assumption of no friction, the perturbed model describes zonal west-to-east flows in the upper atmosphere between the Ferrel and Polar cells. In terms of nonlinear modeling for the NS equations, two small parameters are chosen for the viscosity and the rate of the earth’s rotation and exact solutions in terms of elementary functions are found using approximate symmetry analysis. It is shown that approximately invariant solutions are also valid in the absence of the flow perturbation to a zonally averaged mean flow.

Ecosystems and human well-being

■ Human well-being has several key components: the basic material needs for a good life, freedom and choice, health, good social relations, and personal security. Well-being exists on a continuum with poverty, which has been defined as"pronounced deprivation in well-being."
■ How well-being and ill-being, or poverty, are expressed and experienced is context- and situation-dependent, reflecting local social and personal factors such as geography, ecology, age, gender,and culture.These concepts are complex and value-laden.
■ Ecosystems are essential for human well-being through their provisioning, regulating, cultural, and supporting services. Evidence in recent decades of escalating human impacts. on ecological systems worldwide raises concerns about the consequences of ecosystem changes for human well-being.
■ Human well-being can be enhanced through sustainable human interaction with ecosystems with the support of appropriate instruments, institutions, organizations, and technology. creation of these through participation and transparency may contribute to people's freedoms and choices and to increased economic, social,and ecological security.
■ Some believe that the problems from the depletion and degradation of ecological capital can be largely overcome by the substitution of physical and human capital. Others believe that there are more significant limits to such substitutions.The scope for substitutions varies by socioeconomic status.
■ We identify direct and indirect pathways between ecosystem change and human well-being,whether it be positive or negative.lndirect effects are characterized by more complex webs of causation, involving social, economic, and political threads. Threshold points exist beyond which rapid changes to human well-being can occur.
■ Indigent poorly resourced, and otherwise disadvantaged communities are generally the most vulnerable to adverse ecosystem change. Spirals, both positive and negative, can occur for any population, but the poor are more vulnerable.      
■ Functioning institutions are vital to enable equitable access to ecosystem services. lnstitutions sometimes fail or remain undeveloped because of powerful individuals or groups. Bodies that mediate the distribution of goods and services may also be appropriated for the benefit of powerful minorities.
■ For poor people, the greatest gains in well-being will occur through more equitable and secure access to ecosystem services. In the long run, the rich can contribute greatly to human well-being by reducing their substantial impacts on ecosystems and by facilitating greater access to ecosystem services by the poor.
■ We argue ecological security warrants recognition as a sixth freedom of equal weight with participative freedom, economic   facilities, social opportunities, transparency guarantees, and protective security.

Distribution of power requirements during yarn winding in ring spinning

A model of a yam package is established for a ring spinning system. The yarn layer, surface area, and mass of the yam package are formulated with respect to the diameters of the empty bobbin and full yarn package, yarn count, and yarn winding-on time. Based on the principles of dynamics and aerodynamics, models of the power requirements for overcoming the skin friction drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn), and overcoming the yarn wind-on tension are developed. The skin friction coefficient on the surface of a rotating yam package is obtained from experiment. The power distribution during yam packaging is discussed based on a case study. The results indicate that overcoming the skin friction drag during yarn winding consumes the largest amount of energy. The energy required to overcome the yarn wind-on tension is also significant.

Skin friction coefficient on a yarn package surface in ring spinning

The skin friction coefficient on the surface of a rotating yarn package affects the power required to drive the package. This paper examines the relationship between the skin friction coefficient on the package surface and its diameter and rotating speed, based on the fundamentals of aerodynamics and the experimental results of power consumption. Skin friction coefficients on the surfaces of an airplane, car top, and yarn package are discussed. The results indicate that the skin friction coefficient on the package surface without hairiness depends on the package diameter and spindle speed only. The skin friction coefficient on the yarn package surface is about three times that on the top surface of a car, and is about twenty times that on an airplane surface. The power consumed to overcome skin friction drag is more than that consumed to drive the spindle if the spindle speed is very slow. However, the situation reverses when the spindle speed is fast.

Friction changes during compression tests using tool rotation technique

A compression test with rotating dies was employed to estimate the friction factor between aluminum samples and steel tooling during large plastic deformations. A cylindrical workpiece was compressed under dry and cold conditions. The magnitudes of torque and normal force were measured and
the average friction factor was calculated using the Coulomb friction law. It was found that under certain conditions the friction increased with increasing angular velocity of the die. This finding led to the conclusion that the choice of die rotation speed is important in interpreting the results from the twist compression test.

An experimental investigation of yarn tension in simulated ring spinning

Yarn tension is a key factor that affects the efficiency of a ring spinning system. In this paper, a specially constructed rig, which can rotate a yarn at a high speed without inserting any real twist into the yarn, was used to simulate a ring spinning process. Yarn tension was measured at the guide-eye during the simulated spinning of different yarns at various balloon heights and with varying yarn length in the balloon. The effect of balloon shape, yarn hairiness and thickness, and yarn rotating speed, on the measured yarn tension, was examined. The results indicate that the collapse of balloon shape from single loop to double loop, or from double loop to triple etc, lead to sudden reduction in yarn tension. Under otherwise identical conditions, a longer length of yarn in the balloon gives a lower yarn tension at the guide-eye. In addition, thicker yarns and/or more hairy yarns generate a higher tension in the yarn, due to the increased air drag acting on the thicker or more hairy yarns.

Surface morphologies and internal fine structures of bast fibers

Fiber surface morphologies and associated internal structures are closely related to its properties. Unlike other fibers including cotton, bast fibers possess transverse nodes and fissures in cross-sectional and longitudinal directions. Their morphologies and associated internal structures were anatomically examined under the scanning electron microscope. The results showed that the morphologies of the nodes and the fissures of bast fibers varied depending on the construction of the inner fibril cellular layers. The transverse nodes and fissures were formed by the folding and spiralling of the cellular layers during plant growth. The dimensions of nodes and fissures were determined by the dislocations of the cellular layers. There were also many longitudinal fissures in bast fibers. Some deep longitudinal fissures even opened the fiber lumen for a short way along the fiber. In addition, the lumen channel of the bast fibers could be disturbed or disrupted by the nodes and the spirals of the internal cellular layers. The existence of the transverse nodes and fissures in the bast fibers could degrade the fiber mechanical properties, whereas the longitudinal fissures may contribute to the very rapid moisture absorption and desorption.