Electrical characterization of new electrochromic devices

Electrochromic devices change their color and optical properties with applied voltage. A new symmetrical electrochromic configuration was constructed in previous works, where PEDOT acted as electrochromic layer or as counter electrode layer, depending on the polarity of the applied voltage. Devices of around 500mm2 and switching voltages from 0,5V to 2V are used in this work. Measured electrochemical impedance is fitted to an equivalent circuit based on a Randles cell, with Warburg impedance simulating ionic diffusion at low frequencies. Voltage dependence is analyzed for the first time in this kind of devices. Results show homogeneity problems in the contact layers, not seen in normal operation, and the voltage dependence on some construction parameters. This will be used to improve the devices construction, but improvements in the equivalent circuit should also be made. The proposed equivalent circuit is not valid after the redox reaction, from 1.5 to 2V.

Why is the tetrahedral bond angle 109°? The tetrahedron-in-a-cube

The common question of why the tetrahedral angle is 109.471° can be answered using a tetrahedron-in-a-cube, along with some Year 10 level mathematics. The tetrahedron-in-a-cube can also be used to demonstrate the non-polarity of tetrahedral molecules, the relationship between different types of lattice structures, and to demonstrate that inductive reasoning does not always provide the correct answer.

Retention divergence of terpenes with porous graphitized carbon and C18 stationary phases

The significant divergence between the retention of 16 terpene standards on porous graphitized carbon (PGC) and C18 packing materials are illustrated. The PGC surface is shown to provide a selectivity toward shape, polarity, and structure that is not afforded by the C18 surface. This observation is illustrated by plots of the retention factors similar to those typically used to represent 2D-HPLC separations. A geometric approach to factor analysis was used to measure the separation divergence together with the selectivity and the product selectivity factors of closely related species. When a methanol mobile phase was used with the PGC surface, a large fraction of the separation space could be utilized. That is further reflected by a spreading angle of 80.3°. The PGC material was also successful at resolving structural isomers where the C18 phase was not. It was also found that the choice of the mobile phase is important when using this material. A much larger degree of space utilization was seen with methanol than with acetonitrile that displayed a spreading angle of only 40.8°.

The International Society for Bipolar Disorders (ISBD) Task Force report on the nomenclature of course and outcome in bipolar disorders

Objectives:  Via an international panel of experts, this paper attempts to document, review, interpret, and propose operational definitions used to describe the course of bipolar disorders for worldwide use, and to disseminate consensus opinion, supported by the existing literature, in order to better predict course and treatment outcomes. Methods:  Under the auspices of the International Society for Bipolar Disorders, a task force was convened to examine, report, discuss, and integrate findings from the scientific literature related to observational and clinical trial studies in order to reach consensus and propose terminology describing course and outcome in bipolar disorders. Results:  Consensus opinion was reached regarding the definition of nine terms (response, remission, recovery, relapse, recurrence, subsyndromal states, predominant polarity, switch, and functional outcome) commonly used to describe course and outcomes in bipolar disorders. Further studies are needed to validate the proposed definitions. Conclusion:  Determination and dissemination of a consensus nomenclature serve as the first step toward producing a validated and standardized system to define course and outcome in bipolar disorders in order to identify predictors of outcome and effects of treatment. The task force acknowledges that there is limited validity to the proposed terms, as for the most part they represent a consensus opinion. These definitions need to be validated in existing databases and in future studies, and the primary goals of the task force are to stimulate research on the validity of proposed concepts and further standardize the technical nomenclature.

Synergistic effect of multi walled carbon nanotubes and reduced graphene oxides in natural rubber for sensing application

Utilizing the electrical properties of polymer nanocomposites is an important strategy to develop high performance solvent sensors. Here we report the synergistic effect of multi walled carbon nanotubes (MWCNTs) and reduced graphene oxide (RGO) in regulating the sensitivity of the naturally occurring elastomer, natural rubber (NR). Composites were fabricated by dispersing CNTs alone and together with exfoliated RGO sheets (thermally reduced at temperatures of 200 and 600 °C) in NR by a solution blending method. RGO exfoliation and the uniform distribution of fillers in the composites were studied by atomic force microscopy, Fourier transformation infrared spectroscopy, X-ray diffraction, transmission electron microscopy and Raman spectroscopy. The solvent sensitivity of the composite samples was noted from the sudden variation in electrical conductivity which was due to the breakdown of the filler networks during swelling in different solvents. It was found that the synergy between CNTs and RGO exfoliated at 200 °C imparts maximum sensitivity to NR in recognizing the usually used aromatic laboratory solvents. Mechanical and dynamic mechanical studies reveal efficient filler reinforcement, depending strongly on the nature of filler-elastomer interactions and supports the sensing mechanism. Such interactions were quantitatively determined using the Maier and Göritz model from Payne effect experiments. It is concluded that the polarity induced by RGO addition reduces the interactions between CNTs and ultimately results in the solvent sensitivity. © 2013 The Royal Society of Chemistry.

Wettability investigation of UV/oand acid functionalized MWCNT and MWCNT/PMMA nanocomposites by contact angle measurement

The dispersion state of individual MWCNT in the polymer matrix influences the mechanical, thermal, and electrical properties of the resulting composite. One method of obtaining a good dispersion state of MWCNT in a polymer matrix is to functionalize the surface of MWCNT using various treatments to enhance the surface energy and increase the dispersibility of MWCNT. In this study, wettability and surface energy of UV/Oand acid-treated multiwall carbon nanotubes (MWCNTs) and its polymethyl methacrylate (PMMA) polymer nanocomposites were measured using contact angle analysis in various solvent media. Contact angle analysis was based on ethylene glycol-water-glycerol probe liquid set and data was further fitted into geometric mean (Fowkes), van Oss-Chaudhury-Good (GvOC), and Chang-Qing-Chen (CQC) models to determine both nonpolar and acid base surface energy components. Analysis was conducted on MWCNT thin films subjected to different levels of UV/Oand acid treatments as well as their resulting MWCNT/PMMA nanocomposites. Contact angle analysis of thin films and nanocomposites revealed that the total surface energy of all samples was well fitted with each other. In addition, CQC model was able to determine the surface nature and polarity of MWCNT and its nanocomposites. Results indicated that the wettability changes in the thin film and its nanocomposites are due to the change in surface chemistry. Finally, electrical properties of nanocomposites were measured to investigate the effect of surface functionality (acid or basic) on the MWCNT surfaces.

The role of lamotrigine in the management of bipolar disorder.

Lamotrigine has emerged with a distinct place in the pharmacological treatment of bipolar disorder, with the potential to treat and prevent bipolar depression, which is the dominant and arguably most disabling and under-treated phase of the illness. This review examines the published clinical trials of lamotrigine in bipolar treatment. While the data supports its tolerability and safety, the strongest evidence for its efficacy lies in the prevention of bipolar depression, with weaker evidence for the treatment of acute bipolar depression, refractory unipolar and bipolar depression, and rapid cycling bipolar disorder. The total number of published well designed trials is small, even the maintenance evidence is derived from two studies. However, this relative inadequacy compares favorably with the alternative treatment options for bipolar depression, which are marked by poor efficacy or risk of polarity switch. The designation of lamotrigine as first-line treatment for bipolar depression prophylaxis should be done in cognizance of this context, and it would seem prudent to await greater evidence of efficacy before designating lamotrigine as first-line treatment for other bipolar indications. Further randomized controlled trials are required to consolidate the available findings and to explore the boundaries of lamotrigine's efficacy, which may encompass the soft spectral disorders.

Conditions favoring the formation of monomeric Pt(III) derivatives in the electrochemical oxidation of trans-[Pt(II){(p-BrC6F4)NCH2CH2NEt2}Cl(py)]

Characterization of the anticancer active compound trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] is described along with identification of electrochemical conditions that favor formation of a monomeric one-electron-oxidized Pt^III derivative. The square-planar organoamidoplatinum(II) compound was synthesized through a carbon dioxide elimination reaction. Structural characterization by using single-crystal X-Ray diffraction reveals a trans configuration with respect to donor atoms of like charges. As Pt^III intermediates have been implicated in the reactions of platinum anticancer agents, electrochemical conditions favoring the formation of one-electron-oxidized species were sought. Transient cyclic voltammetry at fast scan rates or steady-state rotating disc and microelectrode techniques in a range of molecular solvents and an ionic liquid confirm the existence of a well-defined, chemically and electrochemically reversible one-electron oxidation process that, under suitable conditions, generates a Pt^III complex, which is proposed to be monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Electron paramagnetic resonance spectra obtained from highly non-coordinating dichloromethane/([Bu4N][B(C6F5)4]) solutions, frozen to liquid nitrogen temperature immediately after bulk electrolysis in a glove box, support the Pt^III assignment rather than formation of a Pt^II cation radical. However, the voltammetric behavior is highly dependent on the timescale of the experiments, temperature, concentration of trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}- Cl(py)], and the solvent/electrolyte. In the low-polarity solvent CH2Cl2 containing the very weakly coordinating electrolyte [Bu4N][B(C6F5)4], a well-defined reversible one-electron oxidation process is observed on relatively long timescales, which is consistent with the stabilization of the cationic platinum(III) complex in non-coordinating media. Bulk electrolysis of low concentrations of [Pt{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] favors the formation of monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Simulations allow the reversible potential of the Pt^II/Pt^III process and the diffusion coefficient of [Pt^III{(p-BrC6F4)- NCH2CH2NEt2}Cl(py)]⁺ to be calculated. Reversible electrochemical behavior, giving rise to monomeric platinum(III) derivatives, is rare in the field of platinum chemistry.

Determination of Kamlet–Taft parameters for selected solvate ionic liquids

The normalised polarity E and Kamlet-Taft parameters of recently described solvate ionic liquids, composed of lithium bis(trifluoromethyl)sulfonimide (LiTFSI) in tri- () or tetraglyme () have been determined and compared to the parent glyme ( and ). We show that these solvate ionic liquids have a high polarity (, (E) = 1.03; , (E) = 1.03) and display very high electron pair accepting characteristics (, α = 1.32; , α = 1.35). Molecular dynamics simulations suggest that the chelated lithium cation is responsible for this observation. The relatively small hydrogen bond acceptor (β) values for these systems (, β = 0.41; , β = 0.37) are thought to be due primarily to the TFSI anion, which is supplemented slightly by the glyme oxygen atom. In addition, these solvate ionic liquids are found to have a high polarisability (, π* = 0.94; , π* = 0.90).

Polymer architecture effect on sodium ion transport in PSTFSI-based ionomers: a molecular dynamics study

In this study, we investigated the effect of polymer architecture on the ion dynamics and local structure to understand the factors that might lead to the design of highly conductive and mechanically robust polyelectrolytes. Molecular dynamic simulations were undertaken on the sodium poly[(4-styrenesulfonyl) (trifluoromethanesulfonyl) imide] P(STFSINa) homopolymer and its copolymers with either ether or styrene spacer groups to investigate the spacer length and polarity dependence of Na-ion transport. Using a scaled charge model, we observed a continuous ion aggregate network in the homopolymer, which facilitates the fast ion dynamics despite the rigid polymer matrix. The longest spacer groups disrupt this percolating ionic network differently, with the ether group being more disruptive than the styrene group, and leading to more discrete ionic aggregates. The copolymer with the ether spacer was also found to result in an alternative Na-ion diffusion mechanism.