Gaussian vault geometry : digital design and fabrication of scaled prototypes

This paper reports on three approaches to the translation of Gaussian surface models into scaled physical prototype models. Using the geometry of Eladio Dieste's Gaussian Vaults, the paper reports on the aspects encountered in the process of digital to physical prototype fabrication. The primary focus of the paper is on exploring the design geometry, investigating methods for preparing the geometry for fabrication and constructing physical prototypes. Three different approaches in the translation from digital to physical models are investigated: rapid prototyping, two dimensional surface models in paper and structural component models using Computer Numerical Controlled (CNC) fabrication. The three approaches identify a body of knowledge in the design and prototyping of Gaussian vaults. Finally the paper discusses the digital to. fabrication translation processes with regards to the characteristics, benefits and limitations of the three approaches of prototyping the ruled surface geometry of Gaussian Vaults.

Computation and construction of vault geometry prototypes

Physical models and scaled prototypes of architecture play an important role in design. They enable architects and designers to investigate the formal, functional, and material attributes of the design. Understanding digital processes of realizing scaled prototypes is a significant problem confronting design practice. This paper reports on three approaches to the translation of Gaussian surface models into scaled physical prototype models. Based on the geometry of Eladio Dieste’s Gaussian Vaults, the paper reports on the aspects encountered in the process of digital to physical construction using scaled prototypes. The primary focus of the paper is on computing the design geometry, investigating methods for preparing the geometry for fabrication and physical construction. Three different approaches in the translation from digital to physical models are investigated: rapid prototyping, two-dimensional surface models in paper and structural component models using CNC fabrication. The three approaches identify a body of knowledge in the design and prototyping of Gaussian vaults. Finally the paper discusses the digital to fabrication translation processes with regards to the characteristics, benefits and limitations of the three approaches of prototyping the ruled surface geometry of Gaussian Vaults. The results of each of three fabrication processes allowed for a better understanding of the digital to physical translation process. The use of rapid prototyping permits the production of form models that provide a representation of the physical characteristics such as size, shape and proportion of the Gaussian Vault.

Physical prototypes in cross-functional team collaboration : a study of the Model-T2 concept car project

Virtual and physical prototypes play a significant role in the design of artifacts. This is particularly true in cross-functional team collaboration, where diverse disciplines come together to contribute to the concept, design and development of an artifact. While the role of prototyping in design and cross-functional collaboration has been widely studied independently, little is known of the role that physical prototypes play during cross-functional team collaboration. This paper reports on a study of virtual and physical prototyping strategies used by a cross-functional team comprising engineers and designers working on a concept car project. The paper provides a background of the collaborative design process and details the role of physical prototyping methods during the design of the concept car.

Towards an efficient haptic rendering using data-driven modeling

This thesis focuses on the optimisation of haptic rendering of interactions with deformable models. The research demonstrated that data-driven techniques can produce a real-time, accurate and complex simulation experience. Applications include, but not limited to, virtual training, rapid prototyping, virtual presence, and entertainment.

CADET - Centre for Advanced Design in Engineering Training

BACKGROUND : The Centre for Advanced Design in Engineering Training (CADET) is a partnership of Deakin University and the Gordon Institute of TAFE that will improve access and pathways into careers to address Australia’s critical engineering skills shortage (Walton, C). Local high schools, Belmont High and Matthew Flinders Girls Secondary College are included as strategic partners. CADET is proposed to be a teaching and learning facility providing a project focused modern engineering approach to students at regional schools and TAFE as well as Deakin’s degree programs. CADET will emphasize engineering design and development through virtual and physical modelling, simulation and prototyping – skills at the heart of the 21st century engineering challenges, and will serve as an attractor to engineering and related professions.

PURPOSE : The purpose of this paper is to present an argument toward the development of a Centre for advanced design in engineering training. CADET is proposed to increase the awareness and attractiveness of engineering as an education and career option, particularly for women, in regional schools, provide under one roof state-of-the-art engineering design, modelling and prototyping facilities, facilitate access and articulation pathways between school, VET and Higher Education, increase the physical capacity to serve student demand in western Victoria, and reinvigorate engineering as an essential component of a skilled regional economy.

DESIGN/METHOD : The evidenced based argument towards the proposed centre for advanced design in engineering training is based on a detailed literature review as well as a research study with industry representatives in engineering design. The learning principles of the model are also investigated and aligned to the proposed centre.

RESULTS : CADET is a change to the way engineering has traditionally been taught. The outcomes of CADET will be to provide a broad range of contemporary/relevant teaching programs, improve the social benefits gained from teaching programs, improve retention rates, advance partnerships that link with rural and regional victoria, and collaborate with local communities to encourage governments to support regional capacity building. Through focus group interviews and open discussions with industry and academia over the past 12 months on the integration of design skills in engineering education, results indicate that the following key skills are essential elements required for a successful project oriented design based learning curriculum are creative & innovative skills, successful industry engagement, and awareness of design skills in early years. Feedback also showed that 80% of the industry representatives are looking to recruit graduates who acquired design-equipped skill and 60% indicated that they want graduates who acquired knowledge through projects.

CONCLUSIONS : CADET projected benefits are significant at the strategic and operational levels. They include access for more women in engineering, facilitates articulation pathways between VET and HE, targeted recognised critical current engineering skills shortage in Australia, improvement of regional access, attractiveness and participation in tertiary education, achievement of a significant improvement in the teaching-research nexus.

Lab-on-a-Chip turns soft : computer-aided, software-enabled microfluidics design

The current practice of designing microfluidic Lab-on-a-Chip (LoCs) limits reusing designs and makes sharing tasks among researchers difficult. One way to achieve that objective is to borrow best practices from engineering. Also it takes a lot of skills to design LoCs. Design-by-assembly in which a LoC can be designed by configuring, laying out subsystems can help new researchers to develop custom chips. Flexible, reusable, and rapid-prototyping-feasible LoC designs can be achieved by fabricated modular microfluidic blocks. However, challenging problems still persist, which limit the usefulness of prefabricated blocks. We propose software microfluidic modules (SoftMABs) based design technique to solve issues fabricated modules face. By configuring SoftMABs, integrating them, the new assembly of SoftMABs can form a 3D LoC design ready to be prototyped. The proposed method can make designing a complex LoC less challenging, and collaborating among laboratories easier. We created SoftMABs and designed a custom microfluidic chip by assembling SoftMABs like LEGOs, dragging-and-dropping them. Later we reconfigured them - by replacing a SoftMAB with another module - to make a new LoC. We believe this computeraided method is an interesting and useful LoC design technique.

Fabrication of polycarbonate microfluidic devices using a focusing and defocusing methods of CO2 laser system

Fabrication of microfluidic devices has always been a challenging endeavour due to its characteristics and cost involved. Recently, laser ablation using low cost engravers has been exploited for fast and cheap prototyping. In this paper, we explore the various parameters affecting the fabrication of polycarbonate microfluidic channels using CO2 laser ablation. The results show that, by manipulating the focus length of the laser beam, we can achieve good cross sectional profiles with low surface roughness. The results also show that various profiles can be fabricated by changing the laser parameters such as laser power, cutting speed and number of laser pulses.

Extending an industrial root controller : implementation and applications of a fast open sensor interface

An overview is given of the design and implementation of a platform for fast external sensor integration in an industrial robot system called ABB S4CPlus. As an application and motivating example, the implementation of force-controlled grinding and deburring within the AUTOFETT-project is discussed. Experiences from industrial usage of the fully developed prototype confirms the appropriateness of the design choices, thus also confirming the fact that control and software need to be tightly integrated. The new sensor can be used for the prototyping and development of a wide variety of new applications

Autonomous capillary microfluidic system with embedded optics for improved troponin I cardiac biomarker detection

 Cardiovascular diseases are the most prevalent medical conditions affecting the modern world, reducing the quality of life for those affected and causing an ever increasing burden on clinical resources. Cardiac biomarkers are crucial in the diagnosis and management of patient outcomes. In that respect, such proteins are desirable to be measured at the point of care, overcoming the shortcomings of current instrumentation. We present a CO2 laser engraving technique for the rapid prototyping of a polymeric autonomous capillary system with embedded on-chip planar lenses and biosensing elements, the first step towards a fully miniaturised and integrated cardiac biosensing platform. The system has been applied to the detection of cardiac Troponin I, the gold standard biomarker for the diagnosis of acute myocardial infarction. The devised lab-on-a-chip device was demonstrated to have 24 pg/ml limit of detection, which is well within the minimum threshold for clinically applicable concentrations. Assays were completed within approximately 7–9 min. Initial results suggest that, given the portability, low power consumption and high sensitivity of the device, this technology could be developed further into point of care instrumentation useful in the diagnosis of various forms of cardiovascular diseases. 2014 Elsevier B.V. All rights reserved.