Towards using ICT to enhance flow of information to aid farmer sustainability in Sri Lanka

Farmers need information at all stages of the farming life cycle to make optimal decisions. The required information includes not only prior knowledge but also real time (dynamic) information such as market prices and current production levels. Some valuable information needed by the farmers is produced by government organizations and is available in different locations in different formats. Although farmer is the most important stakeholder in agriculture, there has not been much effort to provide the essential information to farmers on a real time basis. This lack of information is creating many difficulties for farmers as they are not being able to make the correct decisions relating to their farming activities. Through field studies we have identified information required by farmers at various stages of the farming cycle and official sources where this information is available. Next we developed an information flow model that connects various information sources to farmers’ information needs. Based on these findings we are now developing a mobile phone based information system to deliver the required information to farmers in real time.

Wireless haptic rendering for mobile platforms

Computer haptics has so far been performed on a personal computer (PC). Off the shelf haptic devices provide only PC interfaces and software drivers for control and communication. The new wave of high capable tablet PCs and high end smart phones introduced new platforms for haptic applications. The major problem was to communicate wirelessly to provide user convenience and support mobility which is an essential feature for these platforms. In this paper we provide a wireless layered communication protocol and a hardware setup that enables off the shelf haptic devices to communicate wirelessly with a mobile device. The layers in the protocol enable the change of any hardware components without affecting the data flow. However, the adoption of the wireless interface instead of the wired one comes with the price of speed. Haptic refresh loops require a relatively high refresh rate of 1000 Hz compared to graphics loop which require between 30 and 60 only. An interpolation algorithm was demonstrated to compensate the latency and secure a stable user experience. The introduced setup was tested against portable environments and the users could perform similar functionalities to what are available on a wired setup to a PC.

Influence of turbulence on bed load sediment transport

This paper summarizes the results of an experimental study on the influence of an external turbulence field on the bed load sediment transport in an open channel. The external turbulence was generated by (1) a horizontal pipe placed halfway through the depth h; (2) a series of grids with a clearance of about one-third of the depth from the bed, and extending over a finite length of the flume; and (3) a series of grids with a clearance in the range (0.1−1.0)h from the bed, but extending over the entire length of the flume. Two kinds of experiments were conducted: plane-bed experiments and ripple-covered-bed experiments. In the former case, the flow in the presence of the turbulence generator was adjusted so that the mean bed shear stress was the same as in the case without the turbulence generator in order to single out the effect of the external turbulence on the sediment transport. In the ripple-covered-bed case, the mean and turbulence quantities of the streamwise component of the velocity were measured, and the Shields parameter, due to skin friction, was determined. The Shields parameter, together with the RMS value of the streamwise velocity fluctuations, was correlated with the sediment transport rate. The sediment transport increases markedly with increasing turbulence level.

Effects of 60-day bed rest with and without exercise on cellular and humoral immunological parameters

Exercise at regular intervals is assumed to have a positive effect on immune functions. Conversely, after spaceflight and under simulated weightlessness (e.g., bed rest), immune functions can be suppressed. We aimed to assess the effects of simulated weightlessness (Second Berlin BedRest Study; BBR2-2) on immunological parameters and to investigate the effect of exercise (resistive exercise with and without vibration) on these changes. Twenty-four physically and mentally healthy male volunteers (20-45 years) performed resistive vibration exercise (n=7), resistance exercise without vibration (n=8) or no exercise (n=9) within 60 days of bed rest. Blood samples were taken 2 days before bed rest, on days 19 and 60 of bed rest. Composition of immune cells was analyzed by flow cytometry. Cytokines and neuroendocrine parameters were analyzed by Luminex technology and ELISA/RIA in plasma. General changes over time were identified by paired t-test, and exercise-dependent effects by pairwise repeated measurements (analysis of variance (ANOVA)). With all subjects pooled, the number of granulocytes, natural killer T cells, hematopoietic stem cells and CD45RA and CD25 co-expressing T cells increased and the number of monocytes decreased significantly during the study; the concentration of eotaxin decreased significantly. Different impacts of exercise were seen for lymphocytes, B cells, especially the IgD(+) subpopulation of B cells and the concentrations of IP-10, RANTES and DHEA-S. We conclude that prolonged bed rest significantly impacts immune cell populations and cytokine concentrations. Exercise was able to specifically influence different immunological parameters. In summary, our data fit the hypothesis of immunoprotection by exercise and may point toward even superior effects by resistive vibration exercise.Cellular & Molecular Immunology advance online publication, 10 November 2014; doi:10.1038/cmi.2014.106.

Analytical model to locate the fluidisation interface in a solid-gas vacuum fluidised bed

Vacuum fluidised beds have a distinct advantage of being operated with reduced mass consumption of the fluidising media. However, a low quality of fluidisation reduces the opportunity to utilise the bubbling regime in vacuum fluidised beds. Fluidisation maps are often used to depict the interface between the quiescent, bubbling and slugging regimes inside a fluidised bed. Such maps have been obtained by visual observations of the fluidisation interface in transparent fluidised beds. For beds which are visually inaccessible fluidisation maps are difficult to obtain. The present work therefore attempts to model the interface travel in a vacuum fluidised bed. The pressure gradient due to the bed weight has been determined to be a main contributor for fluidisation/defluidisation under vacuum. A simple analytical model based on the pressure gradient (PG model) is developed to predict the interface location in a vacuum fluidised bed. For a segregated bed, the Gibilaro-Rowe (GR) model is modified and used to predict the jetsam layer growth along with the fluidisation interface. The predictions are compared with the experimental data for minimally and highly segregated particles and it is seen that for non-segregated powders the predictions are quite accurate. Lack of sufficient knowledge of bubble characteristics, however, impeded accurate prediction of the jetsam growth especially at high flow rates. However, an approximate complete fluidisation interface is successfully predicted using the GR-PG model. © 2014 Elsevier B.V.

Resistive exercise versus resistive vibration exercise to counteract vascular adaptations to bed rest

Bed rest results in marked vascular adaptations, and resistive vibration exercise (RVE) has been shown to be an effective countermeasure. As vibration exercise has practical and logistical limitations, the use of resistive exercise (RES) alone has the preference under specific circumstances. However, it is unknown if RES is sufficient to prevent vascular adaptations to bed rest. Therefore, the purpose of the present study was to examine the impact of RES and RVE on the vascular function and structure of the superficial femoral artery in young men exposed to 60 days of bed rest. Eighteen healthy men (age: 31 +/- 8 yr) were assigned to bed rest and randomly allocated to control, RES, or RVE groups. Exercise was applied 3 times/wk for 5-7 min/session. Resting diameter, blood flow, flow-mediated dilation (FMD), and dilator capacity of the superficial femoral artery were measured using echo-Doppler ultrasound. Bed rest decreased superficial femoral artery diameter and dilator capacity (P < 0.001), which were significantly attenuated in the RVE group (P < 0.01 and P < 0.05, respectively) but not in the RES group (P = 0.202 and P = 0.696, respectively). Bed rest significantly increased FMD (P < 0.001), an effect that was abolished by RVE (P < 0.005) but not RES (P = 0.078). Resting and hyperemic blood flow did not change in any of the groups. Thus, RVE abolished the marked increase in FMD and decrease in baseline diameter and dilator capacity normally associated with prolonged bed rest. However, the stimulus provided by RES alone was insufficient to counteract the vascular adaptations to bed rest.

Impact of bed rest on conduit artery remodeling: effect of exercise countermeasures

Physical inactivity is a potent stimulus for vascular remodeling, leading to a marked decrease in conduit artery diameter. However, little is known about the impact of physical inactivity on artery wall thickness or wall:lumen ratio or the potential of exercise countermeasures to modify artery wall thickness. The purpose of the study was to examine the impact of 60 days of bed rest, with or without exercise countermeasures, on carotid and superficial femoral artery wall thickness. Eighteen men were assigned to bed rest (second Berlin Bed Rest Study) and randomly allocated to control, resistive exercise, or resistive vibration exercise. Both exercise countermeasures were applied 3 times per week while the subjects were in the supine position on the bed. Sonography was used to examine baseline diameter and wall thickness of the carotid and femoral arteries. Bed rest decreased diameter of the superficial femoral artery (P=0.001) but not the carotid artery (P=0.29). Bed rest induced a significant increase in carotid and superficial femoral artery wall thickness (P=0.007 and 0.03) and wall:lumen ratio (P=0.009 and 0.001). Exercise prevented the increase in wall thickness of the carotid artery. In addition, exercise partly prevented the increased wall:lumen ratio in the superficial femoral artery. In conclusion, 8 weeks of bed rest resulted in approximately 20% increase in conduit artery wall thickness. Exercise countermeasures completely (carotid artery) or partly (superficial femoral artery) abolished the increase in wall thickness. These findings suggest that conduit artery wall thickness, a vascular characteristic associated previously with atherosclerosis, can rapidly adapt to physical inactivity and exercise in humans.

Mountain barriers and river conduits: phylogeographical structure in a large, mobile lizard (Varanidae: Varanus varius) from eastern Australia

Aim: Across eastern Australia, mountain ranges (the Great Dividing Range) and river catchments (the Murray-Darling Basin) are likely to have shaped the phylogeographical structure of many species. We address how such processes have influenced the phylogeography of the lace monitor, Varanus varius, a large mobile lizard. Location: Eastern and south-eastern Australia. Methods: Phylogeographical hypotheses were tested using up to 90 museum and field-collected samples from across the entire species' range; a 671-bp region of the mtDNA gene ND4 was sequenced and all individuals were genotyped (eight microsatellite loci). Results: Maximum-likelihood analysis of sequence data revealed three geographically separate clades, with divergences estimated to have occurred during the Pleistocene. The south-eastern clade showed an expansion pattern from northern refugia and dispersal appears to have occurred along the Murray-Darling river system. Microsatellite analyses support mtDNA clades but indicate secondary contact in the Hunter Valley, New South Wales. Main conclusions: Our results indicate that phylogeographical structure and contemporary gene flow in Varanus varius is shaped by dispersal capacity, geographical barriers and the presence of ancient river corridors. Indeed, only the most significant geological (McPherson Range) and habitat barriers (Burdekin Gap) appear to limit gene flow in this species. The expansion of the clade on the western side of the Great Dividing Range suggests that ancient riparian corridors have facilitated extensive gene flow. Our study highlights the importance of understanding a species' ecological dynamics when examining broad-scale evolutionary patterns.

Qualitative assessment of bubble behaviour for central and asymmetric injection in 2D gas-solid fluidized bed using image analysis technique and CFD modelling

Bubble characteristics such as shape, size, and trajectory control the hydrodynamics and therefore heat transfer in fluidized bed reactors. Thus understanding these characteristics is very important for the design and scaleup of fluidized beds. An earlier developed Eulerian-Eulerian two-fluid model for simulating dense gas–solid two-phase flow has been used to compare the experimental data in a pseudo-two-dimensional (2-D) bed. Bubbles are injected asymmetrically by locating the nozzle at proximity to the wall, thus presenting the effect wall has on asymmetrical injection as compared to symmetrical injection. In this work, a digital image analysis technique was developed to study the bubble behaviour in a two-dimensional bubbling bed. The high-speed photography reveals an asymmetric wake formation during detachment indicating an early onset of mixing process. The wall forces acts tangentially on thebubble and has a significant impact on the bubble shape, neck formation during detachment and its trajectory through the bed. Larger bubbles drifting away from the centre with longer paths are observed. This qualitative behaviour is well predicted by CFD modelling. Asymmetric injection can significantly influence the heat and mass transfer characteristics.