Peripheral quantitative computed tomography in children and adolescents : the 2007 ISCD pediatric official positions

Peripheral quantitative computed tomography (pQCT) has mainly been used as a research tool in children. To evaluate the clinical utility of pQCT and formulate recommendations for its use in children, the International Society
of Clinical Densitometry (ISCD) convened a task force to review the literature and propose areas of consensus and future research. The types of pQCT technology available, the clinical application of pQCT for bone health assessment in children, the important elements to be included in a pQCT report, and quality control monitoring techniques were evaluated. The review revealed a lack of standardization of pQCT techniques, and a paucity of data regarding differences between pQCT manufacturers, models and software versions and their impact in pediatric assessment. Measurement sites varied across studies. Adequate reference data, a critical element for interpretation of pQCT results, were entirely lacking, although some comparative data on healthy children were available. The elements of the
pQCT clinical report and quality control procedures are similar to those recommended for dual-energy X-ray absorptiometry. Future research is needed to establish evidence-based criteria for the selection of the measurement site, scan acquisition and analysis parameters, and outcome measures. Reference data that sufficiently characterize the normal range of variability in the population also need to be established.

Multivariate modelling of variability in sheet metal forming

The inherent variability in incoming material and process conditions in sheet metal forming makes quality control and the maintenance of consistency extremely difficult. A single FEM simulation is successful at predicting the formability for a given system, however lacks the ability to capture the variability in an actual production process due to the numerical deterministic nature. This paper investigates a probabilistic analytical model where the variation of five input parameters and their relationship to the sensitivity of springback in a stamping process is examined. A range of sheet tensions are investigated, simulating different operating windows in an attempt to highlight robust regions where the distribution of springback is small. A series of FEM simulations were also performed, to compare with the findings from the analytical model using AutoForm Sigma v4.04 and to validate the analytical model assumptions.

Results show that an increase in sheet tension not only decreases springback, but more importantly reduces the sensitivity of the process to variation. A relative sensitivity analysis has been performed where the most influential parameters and the changes in sensitivity at various sheet tensions have been investigated. Variation in the material parameters, yield stress and n-value were the most influential causes of springback variation, when compared to process input parameters such as friction, which had a small effect. The probabilistic model presented allows manufacturers to develop a more comprehensive assessment of the success of their forming processes by capturing the effects of inherent variation.

The effects of an apparent breach of therapeutic regulations on consumers: the Pan Pharmaceuticals recall

The aim of this study was to assess how demographic variables and personal values are related to people's knowledge and cognitive and behavioural responses towards a major drug recall event that occurred in Australia in 2003. For this purpose, a survey was sent out in 2003 to 1000 households in Victoria, Australia. Households had been randomly selected from the electoral role. A total of 415 respondents participated. Results indicated that higher socioeconomic status was related to better information about the recall event and more trust in manufacturers. Respondents who held traditional or naturalistic values were likely to trust that faults in the system would be regulated by the government or consumers themselves. Parents and older respondents were more likely to be critical of the Therapeutic Goods Administration which co-ordinated the recall. Parental status, education and values were related to subsequent changes in respondents' use of complementary medicines. In light of the worth of the health supplement industry to the Australian economy, the results of this survey suggest that the Therapeutic Goods Administration should adopt a more transparent and accountable role towards the public.

Modification of the bitterness of caffeine

Caffeine is the worlds most consumed psychoactive chemical and as such is a valuable commodity to the food and beverage industry. Caffeine also activates the bitter taste system causing a potential problem for manufacturers wanting to develop products containing caffeine. In the present study both oral peripheral and central cognitive strategies were used in an attempt to suppress the bitterness of caffeine. Subjects (n = 33) assessed the influence of sodium gluconate (100 mM), zinc lactate (5 mM), sucrose (125 mM and 250 mM), milk (0%, 2% and 4% milk fat), and aromas (coffee, chocolate, mocha) on the bitterness of caffeine (1.5, 3 and 4.5 mM). The oral peripheral strategies proved most effective at suppressing the bitterness of caffeine: zinc lactate (−71%, p < 0.05), non-fat milk (−49%, p < 0.05), and sodium gluconate (−31%). Central cognitive strategies were partially effective: 250 mM sucrose (−47%, p < 0.05) and mocha aroma (−10%) decreased bitterness, while chocolate (+32%) and coffee (+17%) aromas increased perceived bitterness. Overall, zinc lactate was the most effective bitterness inhibitor, however the utility of zinc in foods is negated by its ability to inhibit sweetness.

Numerical investigation of ramp and constant pressurization system during tube crushing process

The requirement for the automotive industry at present and even more so in the future is to simultaneously develop materials, economic forming processes and techniques for weight reduction of the component. To fulfil this need steel manufacturers have developed Advanced High Strength Steels which have high strength and good formability. Due to high strength, material thickness can be reduced without compromising the function of the component. High pressure hydro forming is one process that can be used to produce complex components from these materials. However, reduction in material thickness of these steels does not result in a large decrease of internal fluid pressure and die closing force during tube hydro forming and hence the higher strengths of these steels will require higher pressures. Tube crushing is a process in which the component can be formed with low pressures. In this paper numerical comparison of ramp and constant pressurization system during tube crushing for a TRIP steel is studied. It is proposed that ramp pressure is the best option to obtain a part with accurate geometrical shape from tube crushing with less die closing force. The stress and thickness distribution of the part during tube crushing were critically analysed.

Experimental and numerical evaluation of forming and fracture behaviour of high strength steel

Car manufacturers are under pressure to reduce vehicle mass while maintaining comfort and passenger safety for current and future vehicles. To meet this demand the steel industry has developed Advanced High Strength Steels (AHSS) that promise higher strength and improved formability compared to conventional steel grades. Even though significant research has already been performed to evaluate the material properties and forming behaviour of most AHSS types, only a limited literature is available on their necking and fracture behaviour and the effect on formability. This paper examines and compares the thinning, necking and fracture behaviour of two AHSS and one conventional steel type, namely TRIP, DP and HSLA. Uniaxial, plane and biaxial strain conditions are investigated by tensile, cup drawing and stretch forming tests and by using numerical methods. The test results indicate that significant differences exist in necking and fracture behaviour between all three steel types.

Chemical modification of timber decking : assessing the parameters of acceptability

The criteria for accepting or rejecting a technology extend beyond the intrinsic properties of the finished product such as physical performance. There are also extrinsic factors such as the history of the product and trust in the manufacturers and suppliers, as well as the perceptions and risk management strategies of various stakeholder groups. A methodology was trialled to take into account the extended supply chain of the product, while simultaneously engaging stakeholders to determine and to understand their perceptual frameworks. Three pine decking products manufactured using different amounts and types of chemical modification were compared using life cycle assessment and the comments of 114 respondents from six stakeholder groups in New Zealand. The results of the perceptual research include a quadrant diagram which allows a visual comparison of the responses of different stakeholders to actual or hypothetical products, aiding the identification of when and why certain technologies may be disqualified from acceptability or become the topic of public debate.

Developing a stakeholder analysis to aid bio-based product innovation

Purpose – The results which that study seeks to report are the first part of a larger research programme funded by the New Zealand Foundation for Research, Science & Technology (FRST) aimed at gaining a better understanding of stakeholder perceptions in relation to bio-based products.

Design/methodology/approach – Utilising three chemically modified wood products, data were collected from focus groups and questionnaires and centred primarily on perceptions surrounding the acceptability of building materials that have been bio-modified. Irrespective of the type of chemical modification, family health and durability were the most important factors identified.

Findings – The study finds that product cost rated lower in the 16 factors evaluated, and energy used in production was of little concern. When comparing the three products to one another, two distinct groups with quite differing purchasing philosophies were identified and these perspectives significantly influenced perceptions of product acceptability and willingness to purchase. Utilising a paired comparison technique, an investigation of trade-offs indicated preference for performance over cost and product familiarity. Similarly, low chemical emissions were also preferred over cost considerations. Among the findings, there was scepticism regarding trust in manufacturers to adequately safeguard health and safety and to have a minimum impact on the environment. Low levels of trust were expressed in regard to manufacturers' concern for future generations.

Originality/value – The paper develops an investigative framework which could be applied to the evaluation of products arising from bio-material technology innovation and recommendations for future research directions.

Bamboo fibres and their unique properties

This paper collates the different properties of bamboo fibres as claimed by bamboo fibre and product manufacturers. The available information suggests that bamboo fibres have unique properties such as excellent appearance and feel, natural antibacterial, UV-shielding and moisture-controlling characteristics. Hence bamboo fibres provide a very promising alternative to other natural fibres by virtue of their novel properties. However, those properties may largely depend on the manufacturing process, which is not widely disclosed. Moreover, common manufacturing process may require the use of a large amount of chemicals and hence further process development may be required in order to make the product truly eco-friendly. It is identified that the data of those unique properties rarely appear in scientific journals and the validity of those claims can be speculative. Therefore, there is a strong need for non-biased scientific research and evaluation on the unique properties of bamboo fibres.

Interactions and networks in Australian tourism

There are many participants in the tourism network who have vested interests in tourism development. These organizations include hotels, associations of hotels and hotel owners, inbound travel agents, travel wholesalers, tourism industry associations, airlines, cruise lines, tourism promotional agencies, regional and local tourism authorities, SME tourism businesses, conference and convention centres and many more. Individuals in the tourism industry intermittently change employment. They often remain in the industry and can move between types of organizations. Their contacts, associations and personal networks remain useful and indeed are utilized. The Interactive Approach postulated by the IMP Group proposes that both suppliers and manufacturers are often involved in close, long-lasting adaptive relationships. Firms within relationships must work together, share objectives, share information and also communicate clearly and precisely using a common language. Here relationship partners should have a similar point of view on the meaning of marketing strategy and related concepts including market segmentation, differentiation and competitive positioning.

This paper seeks to assess the nature, perspectives and characteristics of interactions in the tourism network in Australia. There are two stages of this research. The first stage obtained the perspectives of network participants on the challenges facing tourism, key growth segments, brand and promotional strategies and customer insights and satisfaction levels. Participants were also asked to provide advice to the national marketing organization on a range of developmental topics. The second stage of this research assesses the interaction patterns among network participants Network picture, network position, resource constellations, interaction, resources and activities, interdependence, adaptation, actor bonds, strategy and change are also assessed. The relationships are political and consultative in nature. There is much interdependence and possible conflict between the network participants. The national tourism body has particular skills in tourism planning and tourism research. They also have significant resources and the ability to influence inbound tourism patterns. This paper seeks to assess and understand the interactions within this network.

Impact of electronic data interchange in the Australian automotive industry

Information technology continues to play an increasingly significant role in the development of firms competing in the vast array of markets from those classified as global markets, such as the automotive industry, to the smaller nationally-based markets such as retailing. An objective of electronic commerce is to assist organisations to remain competitive and gain entry to markets which were previously unattainable. This study focuses on the organisational impact of one form of electronic commerce (electronic data interchange) on the component sector of the Australian automotive industry and examines the extent to which trading partner relationships have been affected. The research investigates the extent to which the integration of electronic data interchange (EDI) with an organisation’s internal application system may facilitate specific net benefits. The automotive industry became the first Australian industry to cooperatively adopt EDI. Research to date has not adequately examined the organisational impact of the nature and extent of net benefits gained from EDI adoption. To achieve the objective of assessing EDI net benefits, a conceptual model was developed. The model proposed that the level of EDI net benefits expected is influenced by the size of the organisation and the concentration of trade achieved within the industry via intervening links through (a) the level of senior management commitment and (b) the extent of system integration. Nine empirically testable research propositions are derived from the model, each testing the relationship between model constructs. Data was collected from 114 component suppliers to Ford Australia in 1992 and 1994 using a repeated cross-sectional longitudinal design. Structural equation modelling using partial least squares was adopted in the analysis of the data. A pure longitudinal model together with 12 case studies of selected component manufacturers supplemented the research design. The results of the research showed that the proposed conceptual model is a good description of the data. In particular, net benefits obtained from EDI adoption are directly determined by the size of the organisation, and the extent to which firms integrate EDI into their internal application systems. The level of net benefits is only indirectly influenced by the level of senior management commitment to the EDI project through (a) management commitment’s direct effect on integration, and (b) the direct effect the volume of trade a supplier achieves with the automotive industry on senior management commitment and system integration. The major benefits organisations experienced from EDI were enhanced productivity, clerical staff savings, improved data accuracy, enhanced customer service and reduced administration costs. The research showed that few suppliers gained inventory savings from EDI, a frequently claimed benefit from EDI adoption. Evidence of small improvements in product quality emerged from the results. In summary, this research attempts to make two primary contributions to knowledge, first in providing a method by which net benefits from electronic commerce can be measured within an industry adopting electronic trading, and second, by providing organisations with the knowledge of the specific net benefits organisations could expect from EDI adoption, together with the four major factors affecting these benefits. The research concludes with possible directions for future research, in particular an assessment of the impact of incorporating financial EDI into electronic trading.

Relationship between workplace reform and workforce participation

This thesis sought to advance understanding of the politics of workplace reform, explaining the respective roles of management and employees and how they relate. The literature on workplace reform usually argues that reform is predicated on greater workforce participation in managerial decisions. More specifically, different approaches to workplace reform can be aligned to different forms of participation. Thus quality management can be associated with direct forms of participation, institutional workplace reform may depend on representative forms, and best practice may require a combination of both. This thesis uses empirical evidence to explore this alignment between the different approaches to workplace reform and forms of participation. The period chosen for empirical study is approximately 1985-1992 - an era of rapid innovation in workplace reform for Australian manufacturing. Three workplaces were chosen for intensive study from automotive component manufacturers because that industry was itself a laboratory for workplace reform and also because these firms exemplified different approaches to competitiveness and reform. Three approaches to workplace reform - quality management, institutional workplace reform, and best practice - were distinguished to capture the range of Australian practice at that time. Similarly two approaches to workplace participation were distinguished - direct and representative - to reflect the range of observable practices at that time and to represent competing philosophies. Direct participation illustrated an approach founded in managerial context of the political status quo, whilst representative forms were considered to permit a pluralist shift of power to enable employees to manage in place of management. The three case studies depict companies sharing the competitive crisis of their industry. From this stems the impetus for workplace reform. At this point the firms diverged in their choice of competitive strategies for workplace reform. The case studies reveal, at the superficial level, a match between the chosen approaches to workplace reform and forms of participation. Basically, quality management is associated with direct employee participation, institutional workplace reform with collective bargaining and representative consultative committees, and best practice with both. However when the implementation of reform and participation are examined this match becomes less significant. One firm, Auto Air, achieved highly effective outcomes in both reform and participation. Another firm, Auto Electrical, failed in both. The thesis concluded that the relationship between forms of participation and reform is less significant than the effective implementation of policy. Unitarist or pluralist approaches to power distribution count less than managerial capacity to integrate successive reform initiatives and their commitment to workforce participation hi change.

Bamboo : a distinctive green fibre

This article reports the preliminary findings on the morphology, chemical structure, antimicrobial and UV-screening properties of bamboo fibres. Bamboo fibres provide a very promising alternative to other natural fibres by virtue of their distinctive characteristics such as eco-friendly farming, inherent antimicrobial, UV-protective and highly· breathable properties. However, these novel properties are moslly claimed by fibre manufacturers, with little scientific evidence.  Moreover, those properties may largely depend on the manufacturing process, which is not widely disclosed by the manufacturers, Common manufacturing processes may require the use of a large amount of chemicals which would not make the product truly eco-friendly. Therefore, there is a strong need for unbiased laboratory experiments being conducted in a rigorous manner to elucidate the origin of those unique properties of bamboo fibres and to develop new processing methods to effectively utilise the properties in the final products. This research is aimed to prove the unique characteristics of bamboo fibres scientifically and to develop an efficient manufacturing process, in order to establish the place of bamboo fibres as a novel green material.