Modeling of advanced high strength steels with the realistic microstructure–strength relationships

The objective of the work is to consider the first-order effects of the realistic microstructure morphology in the macroscale modeling of the multiphase Advanced High Strength Steels (AHSS). Instead of using constitutive equations at macroscale, the strength–microstructure relationship is studied in the forms of micromechanical and multiscale models that do not make considerable simplifications with regard to the microscale geometry and topology. The trade-off between the higher computational time and the higher accuracy has been offset with a stochastic approach in the construction of the microscale models. The multiphase composite effects of AHSS microstructure is considered in realistic microstructural models that are stochastically built from AHSS micrographs. Computational homogenization routines are used to couple micro and macroscale and resultant stress–strain relations are compared for models built with the simplified and idealized geometries of the microstructure. The results from this study show that using a realistic representation of the microstructure, either for DP or TRIP steel, could improve the accuracy of the predicted stress and strain distribution. The resultant globally averaged effective stress and strain fields from realistic microstructure model were able to accurately capture the onset of the plastic instability in the DP steel. It is shown that the macroscale mechanical behavior is directly affected by the level of complexities in the microscale models. Therefore, greater accuracy could be achieved if these stochastic realistic microstructures are used at the microscale models.

Role of angiotensin II in the hypertension induced by renal artery stenosis

Identical degrees of renal artery stenosis were induced in 5 dogs on two separate occasions; once during continuous inhibition of angiotensin I converting enzyme with enalapril, and once with the dogs untreated. Arterial pressure rose about 25 mm Hg during 3 days of stenosis in untreated dogs, due to increased total peripheral resistance. When the dogs were treated with enalapril, blood pressure had risen 14.5 ± 3.4 mm Hg 24 hours after stenosis due to a 35% increase in cardiac output while total peripheral resistance fell by 16%. By the third day, blood pressure had returned to pre-stenosis levels, cardiac output was close to normal and total peripheral resistance had increased. The stenosis on the renal artery increased the resistance to blood flow of the kidneys in both untreated and enalapril treated dogs. This increase in kidney resistance in the untreated dogs accounted for about 30% of the change in total peripheral resistance. In the enalapril treated dogs, the increased kidney resistance helped offset the vasodilatation in the rest of the vasculature. These results suggest that angiotensin II mediated vasoconstriction of nonrenal vascular beds was responsible for about ⅔ of the hypertension following renal artery stenosis, and the resistance of the stenosis responsible for about ⅓.

Why do Gull-billed Terns Gelochelidon nilotica feed on fiddler crabs Uca tangeri in Guinea-Bissau?

Gull-billed Terns Gelochelidon nilotica wintering in Guinea Bissau mainly fed on fiddler crabs Uca tangeri and were occasionally seen feeding on fish and locusts. As fiddler crabs have a low energy content, terns need a large gross intake to meet daily energy demands. Fiddler crabs also have a low ratio of digestible flesh to exoskeleton, and therefore tern food intake may be limited by gut capacity. Activity budgets of Gullbilled Terns feeding on fiddler crabs showed that a considerable part of the time was spent resting. The duration of resting intervals increased with energy intake and was positively correlated with the metabolisable energy content of the crab eaten, suggesting that resting periods were required for a proper digestion. The poor quality of fiddler crabs was offset by high capture rates. So daily energy expenditure of the terns could easily be met by feeding on fiddler crabs. Even when resting pauses were included in foraging time, foraging for only 1.5 hours on fiddler crabs satisfied the terns’ daily energy demands. Instead, feeding on energy-rich fish would require about 2.5 hours to satisfy daily energy demands. Compared to the more specialised piscivorous Little Tern Sternula albifrons and Sandwich Tern Sterna sandvicensis, capture rate of fish was poor in Gull-billed Terns. From an energetic point of view, wintering Gull-billed Terns feeding on fiddler crabs seem to have an easy living in Guinea Bissau.

Bipolar II disorder : a review

Objectives: To review the current knowledge of bipolar II disorder.

Methods: Literature was reviewed after conducting a Medline search and a hand search of relevant literature.

Results: Bipolar II disorder is a common disorder, with a prevalence of approximately 3–5%. Distinct clinical features of bipolar II disorder have been described. The key to diagnosis is the recognition of past hypomania, while depression is the typical presenting feature of the illness. This is responsible for a significant rate of missed diagnosis, and consequent management according to unipolar guidelines. It is unclear if bipolar II disorder is over-represented amongst resistant depression populations and if abrupt offset of antidepressant action is a phenomenon over represented in bipolar II disorder, reflecting induction of predominantly depressive cycling. A few mood-stabilizer studies available provide provisional suggestion of utility. A supportive role for psychosocial therapies is suggested, however, there is a sparsity of published studies specific to bipolar II disorder cohorts. A small number of short-term antidepressant trials have suggested efficacy, however, compelling long-term maintenance data is absent.

Conclusions: An emerging literature on the specific clinical signature and management of the disorder exists, however, this is disproportionately small relative to the epidemiology and clinical significance of the disorder.

Climate change regulation : implications for business executives

Purpose – The purpose of this paper is to provide an overarching conceptual decision model that delineates the major issues and decisions associated with carbon regulations that will allow executives to better understand the potential regulatory schemes and implications that may be imposed in the near future.
Design/methodology/approach – The authors use the extant literature as the foundation to develop a conceptual model of the decisions pertaining to climate change regulation that face business executives today.
Findings – This paper suggests four major categories of issues that must be addressed in any climate change regulatory scheme. These include: “scope” – will carbon emission management systems be global or regional; “who pays” – will the consumer or will the supply chain be responsible for the cost of their emissions; “market or compliance-based mechanisms” – will the CO2 emissions system be market-based or a compliance-based regulatory system; and “criteria” – how can credence of the remedy be established – what is necessary for a business initiative to qualify for as a creditable carbon offset?
Research limitations/implications – This paper offers a framework that categories the fundamental decisions that must be made in any climate change regulation. This framework may be useful in advancing research into any of the four categories of decisions and their implications on commerce and the environment. This paper is designed to be managerially useful and in that way does limit its ability to specifically advance many dimensions of research.
Practical implications – The paper offers executives for a simple model of the decisions that must be made to craft an effective climate change regulatory scheme. In addition, it suggests how these decisions may create exploitable economic opportunities for innovative and proactive firms.
Originality/value – This paper adds value to the debate by clarifying the decisions that must be addressed in any climate change regulation scheme.

Natural convection inside dome shaped enclosures

In the present paper the analysis of heat transfer and free convective motion have been carried out numerically for dome shaped enclosures. The solution method is based on the finite element technique with the frontal solver and is used to examine the flow parameters and the heat transfer characteristics inside dome shaped enclosures of various offsets. In formulating the solution a general conic equation is considered to represent the dome of circular, elliptical, parabolic and hyperbolic shapes. The numerical results indicate that the circular and elliptical shapes of dome give higher heat transfer rate and offset of the dome effects convective heat transfer quite significantly. However, beyond 0.3 top dome offset, the change in overall heat transfer rate is not significant. In addition, the convective phenomenon influenced by a dome shaped cover results in establishing a secondary core region even at a moderate Rayleigh number when compared with an equivalent rectangular enclosure. A good comparison between the present numerical predictions and the previous published data is achieved.

Natural convection in domed porous enclosures : non-darcian flow

The natural-convection flow and associated heat transfer in a fluid-saturated porous medium have been investigated using the generalized porous medium approach for a dome-shaped enclosure. Many new features have been predicted with the connective heat transfer and the shape of the top dome cover. The solutions are obtained for a wide range of Darcy and Rayleigh numbers for different offsets and eccentricities of the top dome covers. The detailed parametric study reveals that there is a significant change in heat transfer rate when the offset is between 0.2 and 0.4. Different shapes of conic section, such as circular, elliptical, parabolic, and hyperbolic are used for the top dome cover, and their effects on natural convection and heat transfer rates are studied.

Natural convection in heat generating oval porous enclosurse : a non-darcian model

This paper presents a series of numerical simulations dealing with the problem of natural convection flows and associated heat transfer in an enclosure filled with a fluid-saturated porous medium. The analysis is based on the finite element technique and incorporates the Brinkman-extended Darcy model for an oval enclosure. The numerical results obtained for a modified Rayleigh number, Ra, Darcy number, Da, offset, E, and eccentricity, e, are presented and discussed. The numerical predictions for a square enclosure compared well with published data. It is found that any increase in Da or Ra results in a higher fluid velocity that is responsible for shifting the core of the flow. Moreover, at higher ovality (E = 0.5), asymmetric flow is observed even at the lower range of Rayleigh number (Ra ⩽ 20), which may be attributed to the effect of curved isothermal wall.

Numerical investigation of natural convection inside complex enclosures

In this article, the analyses of heat transfer and free convective motion have been carried out numerically for various structures. The solution is based on a finite element method with the frontal solver to examine the flow parameters and heat transfer characteristics. Several dome configurations--such as flat, inclined, and dome shapes--are considered for the top of the enclosure. A general conic equation is considered to represent the dome as circular, elliptical, parabolic, or hyperbolic shape. The findings from this study indicate that the convective phenomenon is greatly influenced by the shape of the top cover dome and tends to form a secondary core even at a moderate Rayleigh number when compared with an equivalent rectangular enclosure. In addition, the circular and elliptical shapes of the dome give higher heat transfer rate. The effect of various "offset" of the dome and inclined roof on convective heat transfer is also found to be quite significant. However, beyond 0.3 of offset of the top cover for the dome and inclined roof, the change in overall heat transfer rate is minimal. The heat transfer coefficients of dome shaped and inclined roof enclosures are given and discussed.

How potent is fiscal policy in Australia?

This article examines the efficacy of fiscal policy in Australia, focusing on the relationship between changes in the economy’s consolidated fiscal imbalance and private sector saving over recent decades. We first examine the macroeconomic significance of the offset coefficient between public and private savings, whose size effectively determines the effectiveness of fiscal activism. The approach innovatively suggests that these estimates simultaneously reflect Ricardian and other non-Keynesian explanations of private consumption, such as the lifecycle and permanent income theories. Econometric estimation of the offset coefficient for Australia over the period 1980–2008 yields values between 0.75 and near unity, which imply a small or near-zero fiscal multiplier, and that running budget surpluses to lift national saving is ineffective.

Western consumers' understanding of carbon offsets and its relationship to behavior

Purpose – The purpose of this paper is to examine Western consumers’ levels of general environmental knowledge and specific knowledge related to carbon offsets and the relationships between specific types of environmental knowledge and consumers’ related behaviors.

Design/methodology/approach – The study surveyed consumers from Australia (n ¼ 345) and the USA (n ¼ 340) who were sourced through national online panels. The analysis looks at differences between knowledge and behaviors, both across the samples as well as whether there are differences between consumers with high and low levels of environmental and carbon offset knowledge, and whether demographics impact on knowledge levels.

Findings – The results found that consumers had higher levels of general knowledge than carbon offset knowledge and the two types of knowledge were not related. ANOVA results considering country differences and demographic factors found that general knowledge was affected by education, age and gender, with carbon knowledge being affected by education. Environmental behavior was affected by age and gender as well, and no demographic factors influenced carbon-related behavior. Respondent’s location (i.e. USA or Australia) did not influence knowledge or behaviors, but interacted with education in regard to carbon knowledge and behavior.

Social implications – This research suggests that consumers are not acting on their carbon knowledge, which may be due to the debate surrounding carbon issues and/or because the information is based on complex scientific foundations, which the average consumer may have difficulty grasping, regardless of country.

Originality/value – This is one of the first pieces of academic research to explore consumers’ understanding of carbon-related information and how this knowledge impacts behavior. It also proposes a measure for evaluating carbon offset knowledge, which could be used to broaden environmental knowledge assessments.

IaaS clouds vs. clusters for HPC: a performance study

The increasing amount of data collected in the fields of physics and bio-informatics allows researchers to build realistic, and therefore accurate, models/simulations and gain a deeper understanding of complex systems. This analysis is often at the cost of greatly increased processing requirements. Cloud computing, which provides on demand resources, can offset increased analysis requirements. While beneficial to researchers, adaption of clouds has been slow due to network and performance uncertainties. We compare the performance of cloud computers to clusters to make clear the advantages and limitations of clouds. Focus has been put on understanding how virtualization and the underlying network effects performance of High Performance Computing (HPC) applications. Collected results indicate that performance comparable to high performance clusters is achievable on cloud computers depending on the type of application run.

Water deprivation induces appetite and alters metabolic strategy in Notomys alexis : unique mechanisms for water production in the desert

Like many desert animals, the spinifex hopping mouse, Notomys alexis, can maintain water balance without drinking water. The role of the kidney in producing a small volume of highly concentrated urine has been well-documented, but little is known about the physiological mechanisms underpinning the metabolic production of water to offset obligatory water loss. In Notomys, we found that water deprivation (WD) induced a sustained high food intake that exceeded the pre-deprivation level, which was driven by parallel changes in plasma leptin and ghrelin and the expression of orexigenic and anorectic neuropeptide genes in the hypothalamus; these changed in a direction that would stimulate appetite. As the period of WD was prolonged, body fat disappeared but body mass increased gradually, which was attributed to hepatic glycogen storage. Switching metabolic strategy from lipids to carbohydrates would enhance metabolic water production per oxygen molecule, thus providing a mechanism to minimize respiratory water loss. The changes observed in appetite control and metabolic strategy in Notomys were absent or less prominent in laboratory mice. This study reveals novel mechanisms for appetite regulation and energy metabolism that could be essential for desert rodents to survive in xeric environments.

Patient-reported outcomes in trials of incretin-based therapies in patients with type 2 diabetes mellitus

Incretin-based therapies have a glucose-dependent mode of action that results in excellent glucose-lowering efficacy with very low risk of hypoglycaemia, and weight neutrality [dipeptidyl peptidase-4 (DPP-4) inhibitors] or weight loss [glucagon-like peptide-1 (GLP-1) receptor agonists], in people with type 2 diabetes mellitus (T2DM). Patient-reported outcomes (PROs) complement physician evaluations of efficacy and tolerability and offer insights into the subjective experience of using modern diabetes treatments. We conducted a systematic search of clinical trials of the GLP-1 receptor agonists liraglutide, exenatide and long-acting exenatide, one of which included the oral DPP-4 inhibitor sitagliptin as a comparator. No other PRO data for DPP-4 inhibitors were identified. This review summarizes PRO data from eight clinical trials, the majority of which used the Diabetes Treatment Satisfaction Questionnaire (DTSQ) and/or Impact of Weight on Quality of Life-Lite (IWQOL-Lite) to evaluate patient experience. People with T2DM were highly satisfied with modern incretin-based therapies compared with traditional therapies. Treatment satisfaction (including perceptions of convenience and flexibility) was high and generally higher with GLP-1 agonists in association with their greater glucose-lowering efficacy and tendency to facilitate weight loss. Weight-related quality of life (QoL) also improved in people using incretin therapies. The glycaemic improvements achieved with GLP-1 receptor agonists, coupled with the low incidence of hypoglycaemia and ability to cause weight loss, seemed to offset potential concern about injections. It is plausible that superior patient-reported benefits found in clinical trials may translate into improved, clinically meaningful, long-term outcomes through increased treatment acceptability. Long-term, prospective data are needed to ascertain whether this is the case in practice.

Exendin-4 increases islet amyloid deposition but offsets the resultant beta cell toxicity in human islet amyloid polypeptide transgenic mouse islets

Aims/hypothesis In type 2 diabetes, aggregation of islet amyloid polypeptide (IAPP) into amyloid is associated with beta cell loss. As IAPP is co-secreted with insulin, we hypothesised that IAPP secretion is necessary for amyloid formation and that treatments that increase insulin (and IAPP) secretion would thereby increase amyloid formation and toxicity. We also hypothesised that the unique properties of the glucagon-like peptide-1 (GLP-1) receptor agonist exendin-4 to maintain or increase beta cell mass would offset the amyloid-induced toxicity.

Methods Islets from amyloid-forming human IAPP transgenic and control non-transgenic mice were cultured for 48 h in 16.7 mmol/l glucose alone (control) or with exendin-4, potassium chloride (KCl), diazoxide or somatostatin. Human IAPP and insulin release, amyloid deposition, beta cell area/islet area, apoptosis and AKT phosphorylation levels were determined.

Results In control human IAPP transgenic islets, amyloid formation was associated with increased beta cell apoptosis and beta cell loss. Increasing human IAPP release with exendin-4 or KCl increased amyloid deposition. However, while KCl further increased beta cell apoptosis and beta cell loss, exendin-4 did not. Conversely, decreasing human IAPP release with diazoxide or somatostatin limited amyloid formation and its toxic effects. Treatment with exendin-4 was associated with an increase in AKT phosphorylation compared with control and KCl-treated islets.

Conclusions/interpretation IAPP release is necessary for islet amyloid formation and its toxic effects. Thus, use of insulin secretagogues to treat type 2 diabetes may result in increased islet amyloidogenesis and beta cell death. However, the AKT-associated anti-apoptotic effects of GLP-1 receptor agonists such as exendin-4 may limit the toxic effects of increased islet amyloid.