Control and charge management of a grid-connected photovoltaic system with plug-in hybrid vehicle as energy storage

This paper presents the control and charge management strategy of a photovoltaic system (PV) with plug-in hybrid electric vehicle (PHEV) as energy storage. The hybrid energy storage system (HESS) of PHEV consists of battery and supercapacitor. A simulation model for the PV system with PHEV energy storage has been developed using Matlab/SimpowerSystems. The system consists of PV arrays, SEPIC dc-dc converter with maximum power point tracking (MPPT), hybrid battery-supercapacitor energy storage with bidirectional dc-dc converter and inverter for grid connection. A charge management algorithm for the hybrid energy storage system is proposed to control the power flows among the PV system, energy storage and the grid. Results show that the proposed power management algorithm can control the power flows in an efficient manner.

A look-ahead road grade determination method for HEVs

This paper presents a look-ahead road grade determination method for use in energy management of hybrid electric vehicles. Data that is gathered from a digital map and vehicle sensors is used to predict the future road grade and longitudinal forces. The predicted information is employed to specify the near future traction force demand. A simulation is carried out using data associated with a 50 km section of a real highway for a typical vehicle. The results are presented and discussed.

Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes

Exploring high performance cathode materials is essential to realize the adoption of Li-ion batteries for application in electric vehicles and hybrid electric vehicles. FeF3, as a typical iron-based fluoride, has been attracting considerable interest due to both the high electromotive force value of 2.7 V and the high theoretical capacity of 237 mA h g_1 (1e_ transfer). In this study, we report a facile lowtemperature solution phase approach for synthesis of uniform iron fluoride nanocrystals on reduced graphene sheets stably suspended in ethanol solution. The resulting hybrid of iron fluoride nanocrystals and graphene sheets showed high specific capacity and high rate performance for iron fluoride type cathode materials. High stable specific capacity of about 210 mA h g_1 at a current density of 0.2 C was achieved, which is much higher than that of LiFePO4 cathode material. Notably, these iron fluoride/ nanocomposite cathode materials demonstrated superior rate capability, with discharge capacities of 176, 145 and 113 mA h g_1 at 1, 2 and 5 C, respectively.

Impact of dynamic PHEVs load on renewable sources based distribution system

In this paper, charging effect of dynamic Plug in Hybrid Electric Vehicle (PHEV) is presented in a renewable energy based electricity distribution system. For planning and designing a distribution system, PHEVs are one of the most important factor as it is going to be a spinning reserve of energy, and also a major load for distribution network. A dynamic load model of PHEVs is introduced here based on third order battery model. To determine the system adequacy, it is necessary to do a micro level analysis to know the PHEVs load impact on grid. Scope of such analysis will cover the performance of wind and solar generation with dynamic PHEVs load, as well as the stability analysis of the power grid to demonstrate that it is important to consider the dynamics of PHEVs load in a renewable energy based distribution network.

Robust nonlinear distributed controller design for active and reactive power sharing in islanded microgrids

This paper presents a robust nonlinear distributed controller design for islanded operation of microgrids in order to maintain active and reactive power balance. In this paper, microgrids are considered as inverter-dominated networks integrated with renewable energy sources (RESs) and battery energy storage systems (BESSs), where solar photovoltaic generators act as RESs and plug-in hybrid electric vehicles as BESSs to supply power into the grid. The proposed controller is designed by using partial feedback linearization and the robustness of this control scheme is ensured by considering structured uncertainties within the RESs and BESSs. An approach for modeling the uncertainties through the satisfaction of matching conditions is also provided in this paper. The proposed distributed control scheme requires information from local and neighboring generators to communicate with each other and the communication among RESs, BESSs, and control centers is developed by using the concept of the graph theory. Finally, the performance of the proposed robust controller is demonstrated on a test microgrid and simulation results indicate the superiority of the proposed scheme under different operating conditions as compared to a linear-quadratic-regulator-based controller.

A sliding-mode-control-based adaptive cruise controller

This paper presents an alternative solution to the conventional cruise controller of a hybrid electric vehicle based on the sliding mode control approach. The mathematical model of a hybrid electric vehicle cruise control system is developed. Then, the sliding mode control approach is applied as the controller. The sliding mode control stability is investigated and demonstrated. Thereafter, the system is simulated and the results are presented. © 2014 IEEE.

Determining the size of PHEV charging stations powered by commercial grid-integrated PV systems considering reactive power support

Due to low electricity rates at nighttime, home charging for electric vehicles (EVs) is conventionally favored. However, the recent tendency in support of daytime workplace charging that absorbs energy produced by solar photovoltaic (PV) panels appears to be the most promising solution to facilitating higher PV and EV penetration in the power grid. This paper studies optimal sizing of workplace charging stations considering probabilistic reactive power support for plug-in hybrid electric vehicles (PHEVs), which are powered by PV units in medium voltage (MV) commercial networks. In this study, analytical expressions are first presented to estimate the size of charging stations integrated with PV units with an objective of minimizing energy losses. These stations are capable of providing reactive power support to the main grid in addition to charging PHEVs while considering the probability of PV generation. The study is further extended to investigate the impact of time-varying voltage-dependent charging load models on PV penetration. The simulation results obtained on an 18-bus test distribution system show that various charging load models can produce dissimilar levels of PHEV and PV penetration. Particularly, the maximum energy loss and peak load reductions are achieved at 70.17% and 42.95% respectively for the mixed charging load model, where the system accommodates respective PHEV and PV penetration levels of 9.51% and 50%. The results of probabilistic voltage distributions are also thoroughly reported in the paper.

Why do people buy hybrid cars?

This article reports on the underlying dimensions used by petrol-electric hybrid and conventional car buyers when evaluating a vehicle with the intent to purchase. Buyers of conventionally fuelled vehicles reported that they considered quality and performance as the most important determinants of choice. They rated as least important, the image they derive from driving a particular car and social influence. On the other hand, petrol-electric hybrid car buyers reported that social influence and projecting a “green” image were most important considerations and quality and appeal were least important. These findings provide social marketers with a crucial understanding that helps in the selection of an appropriate model to promote the diffusion of eco-friendly vehicles.

A cloud of smug over outdoor education : South Park, hybrid cars and environmental morality

In an episode of South Park titled ‘Hey, People, You’ve Gotta Drive Hybrids Already’, Stan convinces townsfolk to buy hybrid cars. This reduces the rate of smog but creates a toxic cloud of ‘smug’. In this paper, I use this parody of eco-correctness to interrogate some of Outdoor Education’s environmental aims. Michel Foucault’s later work on the self, morality and governmentality is used to analyse the production of the [neo- iberal] ‘environmentally responsible citizen’. The possibilities and problems of contemporary citizenship discourse are explored in relation to findings from a longitudinal study of students undertaking a tertiary outdoor and environmental education course.