Softening during the hot deformation of steel

The behaviour of steel undergoing hot deformation was examined with the aim of better understanding the softening mechanisms operating during industrial hot strip rolling. These softening mechanisms can significantly influence the deformation force required to attain a given reduction in thickness, and this work answered a number of questions with regard to the transition between softening mechanisms.

The use of Fe-30% Ni and Fe-30% Ni-Nb alloys as model systems for studying the microstructural evolution during the hot deformation of austenite

The development of physically-based models of microstructural evolution during thermomechanical processing of metallic materials requires knowledge of the internal state variable data, such as microstructure, texture, and dislocation substructure characteristics, over a range of processing conditions. This is a particular problem for steels, where transformation of the austenite to a variety of transformation products eradicates the hot deformed microstructure. This article reports on a model Fe-30wt% Ni-based alloy, which retains a stable austenitic structure at room temperature, and has, therefore, been used to model the development of austenite microstructure during hot deformation of conventional low carbon-manganese steels. It also provides an excellent model alloy system for microalloy additions. Evolution of the microstructure and crystallographic texture was characterized in detail using optical microscopy, X-ray diffraction (XRD), SEM, EBSD, and TEM. The dislocation substructure has been quantified as a function of crystallographic texture component for a variety of deformation conditions for the Fe-30% Ni-based alloy. An extension to this study, as the use of a microalloyed Fe-30% Ni-Nb alloy in which the strain induced precipitation mechanism was studied directly. The work has shown that precipitation can occur at a much finer scale and higher number density than hitherto considered, but that pipe diffusion leads to rapid coarsening. The implications of this for model development are discussed.

The inclusion of ‘then-test’ questions in post-test questionnaires alters post-test responses: a randomized study of bias in health program evaluation

Objectives Program evaluations are frequently based on ‘then-test’ data, i.e., pre-test collected in retrospect. While the application of the then-test has practical advantages, little is known about the validity of then-test data. Because of the collection of then-test in close proximity to post-test questions, this study was aimed at exploring whether the presence of then-test questions in post-test questionnaires influenced subjects’ responses to post-test.
Patients and methods To test the influence of then-test questions, we designed a randomized three-group study in the context of chronic disease self-management programs. Interventions had comparable goals and philosophies, and all 949 study participants filled out identical Health Education Impact Questionnaires (heiQ) at pre-test. At post-test, participants were then randomized to one of the following three groups: Group A responded to post-test questions only (n = 331); Group B filled out transition questions in addition to post-test (n = 304); and Group C filled out then-test questions in addition to post-test (n = 314).
Results Significant post-test differences were found in six of eight heiQ scales, with respondents who filled out then test questions reporting significantly higher post-test scores than respondents of the other groups.
Conclusions This study provides evidence that the inclusion of then-test questions alters post-test responses,
suggesting that change scores based on then-test data be interpreted with care.

Dynamic strain-induced ferrite transformation during hot compression of low carbon Si-Mn steels

The dynamic strain-induced transformation (DSIT) of austenite to ferrite was investigated under different undercooling conditions using three low carbon Si-Mn steels. The undercooling of austenite (ΔT) was controlled by varying the cooling rate between austenitization and deformation temperatures. Uniform DSIT ferrite grains (∼2.3 μm) were produced at a relatively high deformation temperature above 840°C using a low carbon high Si steel (0.077C-0.97Mn-1.35Si, mass%) in connection with a larger ΔT. The critical conditions for DSIT were determined based on the flow stress-strain curves measured during hot compression tests. Influence of deformation temperature on DSIT of low carbon Si-added steel was also discussed.

Evaluation of the Test-mate ChE (cholinesterase) field kit in acute organophosphorus poisoning

STUDY OBJECTIVE: Measurement of acetylcholinesterase (AChE) is recommended in the management of organophosphorus poisoning, which results in 200,000 deaths worldwide annually. The Test-mate ChE 400 is a portable field kit designed for detecting occupational organophosphorus exposure that measures RBC AChE and plasma cholinesterase (PChE) within 4 minutes. We evaluate Test-mate against a reference laboratory test in patients with acute organophosphorus self-poisoning. METHODS: This was a cross-sectional comparison study of 14 patients with acute organophosphorus poisoning between May 2007 and June 2008. RBC AChE and PChE were measured in 96 and 91 samples, respectively, with the Test-mate ChE field kit and compared with a reference laboratory, using the limits of agreement method (Bland and Altman), κ statistics, and Spearman's correlation coefficients. RESULTS: There was good agreement between the Test-mate ChE and the reference laboratory for RBC AChE. The mean difference (Test-mate-reference) was -0.62 U/g hemoglobin, 95% limits of agreement -10.84 to 9.59 U/g hemoglobin. Good agreement was also observed between the categories of mild, moderate, and severe RBC AChE inhibition (weighted κ 0.85; 95% confidence interval [CI] 0.83 to 0.87). Measurement of PChE also showed good agreement, with a mean difference (Test-mate-reference) of +0.06 U/mL blood, 95% limits of agreement -0.41 to 0.53 U/mL blood. Spearman's correlation coefficients were 0.87 (95% CI 0.81 to 0.91) for RBC AChE and 0.76 (95% CI 0.66 to 0.84) for PChE. Analysis for within-subject correlation of subjects did not change the limits of agreement. CONCLUSION: The Test-mate ChE field kit reliably provides rapid measurement of RBC AChE in acute organophosphorus poisoning.

The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel

The present work has investigated the evolution of microbands (MBs) and their interaction with strain-induced NbC precipitates during uniaxial compression of a model austenitic Fe-30Ni-Nb steel at 925 °C. The (1 1 0) fibre grains, both without and with copious amounts of precipitates, contained up to large strains crystallographic MBs aligned close to the highly stressed {1 1 1} slip planes having large Schmid factors. The MBs thus maintained their crystallographic character during straining, through continuously rearranging themselves, and did not follow the macroscopically imposed rigid body rotation. During double-pass deformation, fine NbC particles formed at short inter-pass holding remained strongly pinned at small reloading strains and appeared to be dragged by rearranging MB walls. With increasing reloading strain, the fine precipitates became progressively released from the above walls. During reloading after increased holding time, the coarsened particles tended with their increased size to become increasingly detached from the MB walls already at a small strain. The precipitate-free MB wall segments rearranged during straining to maintain their crystallographic alignment, while the detached precipitates followed the sample shape change and rotated towards the compression plane. The MB wall rearrangement generally occurred through cooperative migration of the corresponding dislocation networks.

A heuristic model selection scheme for representing hot flow data using the hot torsion test results

The problem of "model selection" for expressing a wide range of constitutive behaviour adequately using hot torsion test data was considered here using a heuristic approach. A model library including several nested parametric linear and non-linear models was considered and applied to a set of hot torsion test data for API-X 70 micro-alloyed steel with a range of strain rates and temperatures. A cost function comprising the modelled hot strength data and that of the measured data were utilized in a heuristic model selection scheme to identify the optimum models. It was shown that a non-linear rational model including ten parameters is an optimum model that can accurately express the multiple regimes of hardening and softening for the entire range of the experiment. The parameters for the optimum model were estimated and used for determining variations of hot strength of the samples with deformation.

Mapping the hot deformation microstructure of Ni-30Fe alloy

The evolution of structure during the hot working of an austenitic Ni-30%Fe alloy is studied using EBSD analysis of samples tested in torsion. A microstructural map in temperature-strain space that plots grain size, cell size, fracture and dynamic recrystallization is presented.

Nano- and macro-scale characterisation of the mechanical properties of bovine bone

In the present study, nano- and macro-scale characterisations on the mechanical properties of bovine cortical bones have been performed by using nanoindentation and conventional compressive tests. Nanoindentation results showed that the elastic modulus for the osteons and the interstitial lamellae in the longitude direction were 24.7 ± 2.5 GPa and 30.1 ± 2.4 GPa. As it’s difficult to distinguish osteons from interstitial lamellae in the transverse direction, the average elastic modulus for cortical bovine bone in the transverse direction was 19.8 ± 1.6 GPa. Significant differences were found in the modulus values between different microstructures of bone tissue and in different testing direction. It was found that the elastic modulus of bone bovine material in nano-level was higher than that in macro-level. The elastic modulus and
ultimate stress of large bone samples were 12.5 ± 1.9 GPa and 195 ± 19 MPa respectively from the compression test.

Tests of measurement invariance failed to support the application of the "then-test"

Objective
The use of then-test (retrospective pre-test) scores has frequently been proposed as a solution to potential confounding of change scores because of response shift, as it is assumed that then-test and post-test responses are provided from the same perspective. However, this assumption has not been formally tested using robust quantitative methods. The aim of this study was to compare the psychometric performance of then-test/post-test with traditional pre-test/post-test data and assessing whether the resulting data structures support the application of the then-test for evaluations of chronic disease self-management interventions.

Study Design and Setting
Pre-test, post-test, and then-test data were collected from 314 participants of self-management courses using the Health Education Impact Questionnaire (heiQ). The derived change scores (pre-test/post-test; then-test/post-test) were examined for their psychometric performance using tests of measurement invariance.

Results
Few questionnaire items were noninvariant across pre-test/post-test, with four items identified and requiring removal to enable an unbiased comparison of factor means. In contrast, 12 items were identified and required removal in then-test/post-test data to avoid biased change score estimates.

Conclusion
Traditional pre-test/post-test data appear to be robust with little indication of response shift. In contrast, the weaker psychometric performance of then-test/post-test data suggests psychometric flaws that may be the result of implicit theory of change, social desirability, and recall bias.