Improving on- and off-campus student performance in structural mechanics

This paper investigates the performance of 329 (173 on- and 186  off-campus) students enrolled in two structural mechanics units at Deakin University, a leader in engineering distance-education in Australia. The two units experience unacceptably high rates of failure. An analysis of the assignment, laboratory and examination marks is presented. Consideration is also given to the total marks. The results show that on-campus students perform better in structural mechanics than their off-campus counterparts. Plots of the student performance distributions for the three assessment methods are provided (for each unit) and high failure rates are linked to low examination marks. Students tend to perform best in assignments and worst in examinations. Parametric statistical tests show a correlation between the continuous assessment and examination marks. To motivate students to fully participate in continuous assessment tasks the authors therefore propose several changes to the assessment criteria and marking schemes.

The relationship between social anxiety and alcohol use in remand prisoners

Community studies have found a consistently high co-occurrence, between alcohol use and anxiety disorders, such as social phobia. Despite high prevalence rates of alcohol use and anxiety disorders in remand prisoners, the extent to which they co-occur in this population and the use of alcohol as a strategy to reduce social anxiety, have not been examined. The aim of this study was to assess levels of social phobia and the use of alcohol to reduce anxiety associated with social and performance situations in a remanded prison population. One hundred and one male prisoners (age M = 34.88 years, SD = 11.70) participated in the study. They completed the Social Phobia Inventory (SoPhI) and a questionnaire designed to assess levels of drinking in social and performance situations to reduce anxiety. High levels of social anxiety were found, together with high levels of drinking to reduce anxiety associated with social or performance situations. Drinking was predictive of reduced levels of social anxiety but the effect of social anxiety on drinking was stronger. The implications for treatment and future research are discussed.

The global biopharma industry and the rise of Indian drug multinationals: implication for Australian generics policy

This article provides a synopsis of the new dynamics of the global biopharma industry. The emergence of global generics companies with capabilities approximating those of 'big pharma' has accelerated the blurring of boundaries between the innovator and generics sectors. Biotechnology-based products form a large and growing segment of prescription drug markets and regulatory pathways for biogenerics are imminent. Indian biopharma multinationals with large-scale efficient manufacturing plants and growing R&D capabilities are now major suppliers of Active Pharmaceutical Ingredients (APIs) and generic drugs across both developed and developing countries. In response to generic competition, innovator companies employ a range of life cycle management techniques, including the launch of 'authorised generics'. The generics segment in Australia will see high growth rates in coming years but the prospect for local manufacturing is bleak. The availability of cheap generics in international markets has put pressure on Pharmaceutical Benefits Scheme (PBS) pricing arrangements, and a new policy direction was announced in November 2006. Lower generics prices will have a negative impact on some incumbent suppliers but industrial renewal policies for the medicines industry in Australia are better focused on higher value R&D activities and niche manufacturing of sophisticated products.

Delivery and assessment strategies to improve on- and off-campus student performance in structural mechanics

This paper considers the delivery and assessment strategies used in two structural mechanics units at Deakin University, a leader in distance education in Australia. The two units have had unacceptably high rates of student failure. Student perceptions of the delivery method were analysed and an investigation was carried out of the performance of 329 (173 on- and 156 off-campus) students enrolled in the two units. An analysis of the assignment, laboratory and examination marks is presented. Consideration is also given to the total marks. The results show that on-campus students performed better in structural mechanics than their off-campus counterparts. Plots of the distributions of student performance for the three assessment methods are provided (for each unit) and high failure rates are linked to low examination marks. Students tended to perform best in assignments and worst in examinations. Parametric statistical tests show a correlation between the marks obtained in continuous assessment and in examinations, and it is therefore proposed that, in order to improve performance, the students must be encouraged to participate fully in all aspects of the course. Many students were unenthusiastic about laboratory practical sessions and did not think they aided their understanding of the theoretical material. Motivation to participate is often dependent on the perceived relevance of a given task and its contribution to the total mark and, thus, to help motivate students to participate fully in the continuous assessment tasks, the authors propose several changes to the delivery methods, as well as to assessment criteria and marking schemes.

Flexible delivery in the Australian vocational education and training sector: Barrier to success identified in cases studies of four adult learners

Government policy in Australia is increasingly encouraging training organisations in the Vocational Education and Training (VET) sector to adopt flexible delivery approaches, but some researchers are sounding a note of caution. Evidence is emerging that Australian VET learners are not universally ready for flexible delivery, and this is reflected in high attrition rates and low pass rates. The literature on flexible delivery identifies a number of specific factors that can impact on the success of adult learners. However, there seems to be agreement that failure or dropout is not determined by a single factor, but by the interaction of a number of factors that build up over time. To understand these factors, we need to understand the learners - what their participation in education means to them, the context in which they are studying, and the numerous inter-connected factors that contribute to their failure to achieve a successful outcome. This paper discusses four case studies from a research project that followed up a small number of adult learners who enrolled in flexible delivery VET courses but did not achieve a successful outcome.

Flexible delivery and student attrition in the vocational education and training sector: case studies of students who dropped out

Government policy in Australia is increasingly encouraging training organisations in the Vocational Education and Training (VET) sector to adopt flexible delivery approaches. This policy shift is supported by key VET stakeholders including Industry Training Advisory Boards. A recurring theme in VET policy documents is an apparent confidence that flexible delivery can meet the diverse needs of individual learners while at the same time providing cost savings. Yet evidence is emerging that Australian VET learners are not typically ready for flexible delivery, and this lack of readiness is reflected in high attrition rates and low pass rates in many flexibly delivered courses. One research project found that over 70% of learners in the Australian VET sector do not have the learning capabilities required to be ready for flexible delivery. A recent review of the module outcomes achieved by VET students nationally found that students studying by external/correspondence and self-paced unscheduled modes had lower module completion rates than students studying by other delivery strategies.

Research on student progress in flexible delivery within the Australian VET sector has largely been quantitative. That research provides useful statistical data on completion and attrition rates for various modes of delivery, but does not explore the reasons underlying the high attrition rates found in flexible delivery. The qualitative research that is available tends to focus on students who successfully complete their courses, not on those who withdraw. As a result, the Australian literature on flexible delivery in the VET sector is lacking in-depth qualitative information about students who enrol in courses but do not complete. In comparison, the broader literature on distance education and flexible delivery in other educational sectors offers some useful insights into student attrition, and can be can be used to inform research into attrition within the Australian VET sector.

This paper reports on aspects of a research project that followed up six adult learners who enrolled in VET courses but who either failed assessment or withdrew. The research project presented the students’ stories in the form of narrative case studies, focussing on the detailed examination of the barriers that each student experienced, and analysing these barriers in relation to issues raised in the literature. This paper reports on two particular themes that emerged from that research project. The literature on distance education and flexible delivery argues that:


· student dropout is often not determined by a single factor, but by the interaction of a number of factors that build up over time;

· students who experience difficulties when studying by flexible delivery can often be reluctant to access the support that is available to them.

This paper uses these themes as a point of reference in presenting the stories of some of the students who participated in the research project.

Dispersal of Hormosira banksii (phaeophyceae) via detached fragments : reproductive viability and longevity

Drifting, fertile thalli are well documented to be the primary long-distance dispersal vector for many marine macroalgae, but little information about reproductive viability of drift is known. This study examined the reproductive viability and longevity of floating fragments of the intertidal Australasian fucoid Hormosira banksii (Turner) Decne. Beach wrack surveys and field experiments were conducted to test the model that long-distance dispersal is achieved in H. banksii via floating, fertile fronds. High densities of beach wrack fragments were evident during summer compared to autumn. The majority of beach wrack occurred on sandy beaches rather than rocky shores. Both male and female fragments were present in the beach wrack. Detached fronds were capable of releasing gametes up to 8 weeks after detachment. Beach wrack produced high fertilization rates and recruited successfully onto artificial panels. Results suggest that detached fragments are reproductively viable and that floating, fertile fronds may be an important mechanism for facilitating long-distance dispersal in this species. Nevertheless, the frequency of fronds reaching a suitable habitat and contributing to gene flow between populations, or colonizing new populations, may not be proportional to the total density of beach wrack.

固化条件对热塑增韧环氧树脂的固化动力学和相分离的影响

Thermoplastic toughened epoxy resins are widely used as matrices in modern prepreg systems.Different curing conditions play a great role in affecting the cure kinetics and phase behaviour of thermoplastic modified epoxies which further result in different mechanical properties of polymer matrix composites.Since the morphology of the cured thermoplastic/epoxy blends is directly related to the mechanical properties,it is essential to control processing conditions for obtaining desirable morphology.A polyethersulphone (PES) modified multifunctional epoxies,triglycidylaminophenol (TGAP) and tetraglycidyldiaminodiphenylmethane (TGDDM),was used for investigation.The cure kinetics and cured morphology of polymer blends heated at different heating rates and cured at different temperature were studied.It is shown that higher cure temperature and higher heating rate display similar effects in the epoxy conversion and the domain size of phase separated structure.

Thermal degradation of natural rubber/ZNO nanocomposites

Nanoparticies have been widely used to enhance the properties of natural rubber (NR). In the present paper a novel nanocomposite was developed by blending nano-ZnO slurry with prevulcanized NR latex, and the thermal degradation process of pure NR and NR/ZnO nanocomposites with different nano-ZnO loading was studied with a Perkin Elemer TGA-7 thermogravimetric analyzer. The thermal degradation parameters of NR/ZnO (2 parts ZnO per hundred dlY rubber) at different heating rates (Bs) were studied. The results show that the thermal degradation of pure NR and NR/ZnO nanocomposites in nitrogen is a one-step reaction. The degradation temperatures of NR/ZnO nanocomposite increase with an increasing B. The peak height (R_p) on the differential thermogravimetric curve increases with the increase of B. The degradation rates are not affected significantly by B, and the average values of thermal degradation rate C_p and C_f are 44.42 % and 81.04 %, respectively. The thermal degradation kinetic parameters are calculated with Ozawa-Flynn-Wall method. The activation energy (E) and the frequency factor (A) vary with ecomposition degree, and can be divided into three phases corresponding to the volatilization of low-molecular-weight materials, the thermal degradation ofNR main chains and the decomposition of residual carbon.

Introducing active support in the United States : staff training developments and research directions

Aim: Active Support, an evidence-based intervention developed in the UK and tested in Australia, enables direct support professionals to engage people with high support needs in meaningful and rewarding every day activities. This paper outlines the practical details of adapting the Active Support curriculum for service providers in the US and outlines an evaluation methodology that will inform both service delivery and future developments of Active Support.

Method: Active Support curricula developed in the UK and Australia were adapted for implementation the US.Train-the-trainer activities were conducted in early 2008 in three group homes serving 12 people with intellectual or developmental disabilities. A formative evaluation process was used to identify changes in the materials and training design needed to support a randomized controlled trial of the intervention in 20 small group homes.

Results: Modifications in the delivery of training are needed to account for differences in scheduling patterns and high turnover rates in US group homes, and to adjust British/Australian terminology to the U.S. context.

Conclusions: The translation of active support into the U.S. context requires modifications to support successful implementation. Research is planned to document the success of the modified curriculum in improving outcomes for persons with disabilities.

Co-morbidity of conditions among prisoners

Eighty seven adult prisoners (58 males, 29 females) completed the Beck Depression Inventory (BDI-II), Beck Anxiety Inventory (BAI), and a questionnaire on current health in order to examine both the prevalence of co-morbid conditions and the relation of depression and anxiety to ill-health and prior substance use. High prevalence rates of co-morbid conditions were detected among prisoners, with substance use history identified as the primary contributor to co-morbidity. In addition, better perceived mental health was associated with lower depression among prisoners, and a higher number of mental health conditions was associated with greater anxiety. Implications of co-morbid conditions of ill-health for the support of prisoners are discussed.

Ecology of meiofauna in a temperate mangrove ecosystem in south-eastern Australia

The meiofauna of a mangrove forest in the River Barwon estuary was studied by means of surveys and field experiments. Distinctive assemblages of meiofauna were described from the sediment and pneumatophores of the ecosystem. Fine resolution of phytal habitats was demonstrated, and particular assemblages of meiofauna were characteristic within habitat provided by dominant epibionts. Distribution of the meiofauna within leaf litter revealed high turnover rates of nematodes, and some factors controlling detrital assemblages were assessed. The vertical profile of sedimentary meiofauna was examined, and changes in abundance were related to the tychopelagic habit of many taxa at high tide. Dispersal within the water column was confirmed by pelagic trapping, and colonisation of mimic pneumatophores was investigated. The amount of algal cover, effects of grazing by gastropods, and rugosity of the colonised surface were shown to influence meiofauna colonisation of mimic pneumatophores. Establishment and persistence of patchy distributions of meiofauna at scales of less than 10 m in an intertidal environment was demonstrated, and it was concluded that this was due to the dynamic nature of assemblages rather than their integrity.

Cystic fibrosis in children of the eastern Arabian peninsula : a clinical, spatial and genetic study

Aim: The aim of this thesis is to describe the process by which the inherited disease, cystic fibrosis, (CF) was recognised as an important clinical entity in the United Arab Emirates (UAE) and the Sultanate of Oman (Oman). It examines the clinical presentation of the first patients and assesses their degree of severity. Further, it describes the first studies carried out to determine the underlying CF mutations associated with the disease in the UAE and Oman. An estimate is offered of the birth frequency of the condition. Overall, the cultural, geographical and historical aspect of the societies in which the disease occurs is stressed. Methods: An initial literature search was carried out using Medline of any literature pertaining to the Arab World and CF. this was read and classified into the relevance to Arabs in general, the Middle East and then specifically the Arab (Persian) Gulf societies. Thereafter, a clinic was established at Tawam Hospital, Al Ain, UAE, for children presenting With chronic respiratory disease that could serve as a national referral centre. It was run by the Author as a service of the Paediatric Department of the UAE University Medical School. I sent a letter to every Paediatrician working in the UAE informing them of our clinic and offering our services for the diagnosis and management of chronic respiratory disease in children. This was based on the author's experience as a respiratory paediatrician in Australia and New Zealand and as the Professor of Paediatrics in the UAE. No such service then existed in the UAE. Funding was sought to establish a research programme and develop a molecular genetics laboratory in the UAE Medical School. A series of successful research applications provided the grants to commence the investigations. Once a small number of children had been identified as having CF from those referred to the respiratory clinic, the initial project was to assess and report their clinical presentation. Following this an early start was made on the identification of the mutations responsible. Once these were established an attempt was made to estimate the frequency of the condition at birth. Additional clinical studies revolved around assessing the severity of the condition that was associated with the main mutations that were identified. A clinical comparison was made with those with the mutation AF508 and the other main mutation, despite the obvious limitation of small numbers then available. Radiological assessment was made to evaluate the progression of the disease. The final aspect of the study was to assess patients from Oman and compare their findings and mutations with the neighbouring UAE. Based on information gained hypotheses are proposed regarding the spread of the gene mutation by population drift. Thesis outline: A literature review is presented in the form of a critique on the disease and a resume of the relevant aspects of the genetics of CF. Additionally, facts about the two countries' geography and history are presented. Finally, knowledge about CF mutations and population origins from other areas is presented. The second main section deals with the clinical features of the disorder as it presents in the UAE. Molecular findings are then presented and details of the common mutation found in Bedouin Arabs. Hypotheses are then presented based on the information gathered. Results: CF is not a rare disease in the Arab children of the UAE and Oman. These findings refute previous reports of CF being a rare or non-existent disease in Arabs. The condition presents with a severe clinical picture, with early colonisation of the respiratory tract with staphylococcus, haemophilus and pseudomonas organisms, even with conventional CF management practices in place. The CF mutation S549R is prevalent in Arabs of Bedouin stock, while AF508 is found in those of Baluch origin. The former may be descendants of Arabs who left southern Arabia and travelled to the Trucial Coast at the time of the destruction of the great dam at Marib. The origins of this mutation may lie in the area that corresponds to the modern Republic of Yemen. The latter groups are descendants of those who came originally from Baluchistan. It is hypothesised also that the ancestral home of the AF508 mutation may be in the geographical area now known as Baluchistan, that spans three separate modern political territories. The evidence presented supports the concept that the S549R mutation may be associated with a severe, if not the severest, clinical pattern recognised. It equates with that seen with the homozygous AF508 genotype. The absence of an additional mutation in the promoter region accounts for the different clinical pattern seen in previously described patients. Conclusions: There needs to be a major awareness of the presence of CF as a severe clinical disease in the children of the Gulf States. The clinical presentation and findings support the concept of under recognition of the disease. Climatic conditions put the children at special risk of hyponatraemia and electrolyte imbalance. The absence of surviving adults with the disease suggests premature deaths have occurred, but the high fertility rates have maintained the gene pool for this recessive disorder.

Extracting fingerprint features using textures

Personal identification of individuals is becoming increasingly adopted in society today. Due to the large number of electronic systems that require human identification, faster and more secure identification systems are pursued. Biometrics is based upon the physical characteristics of individuals; of these the fingerprint is the most common as used within law enforcement. Fingerprint-based systems have been introduced into the society but have not been well received due to relatively high rejection rates and false acceptance rates. This limited acceptance of fingerprint identification systems requires new techniques to be investigated to improve this identification method and the acceptance of the technology within society. Electronic fingerprint identification provides a method of identifying an individual within seconds quickly and easily. The fingerprint must be captured instantly to allow the system to identify the individual without any technical user interaction to simplify system operation. The performance of the entire system relies heavily on the quality of the original fingerprint image that is captured digitally. A single fingerprint scan for verification makes it easier for users accessing the system as it replaces the need to remember passwords or authorisation codes. The identification system comprises of several components to perform this function, which includes a fingerprint sensor, processor, feature extraction and verification algorithms. A compact texture feature extraction method will be implemented within an embedded microprocessor-based system for security, performance and cost effective production over currently available commercial fingerprint identification systems. To perform these functions various software packages are available for developing programs for windows-based operating systems but must not constrain to a graphical user interface alone. MATLAB was the software package chosen for this thesis due to its strong mathematical library, data analysis and image analysis libraries and capability. MATLAB enables the complete fingerprint identification system to be developed and implemented within a PC environment and also to be exported at a later date directly to an embedded processing environment. The nucleus of the fingerprint identification system is the feature extraction approach presented in this thesis that uses global texture information unlike traditional local information in minutiae-based identification methods. Commercial solid-state sensors such as the type selected for use in this thesis have a limited contact area with the fingertip and therefore only sample a limited portion of the fingerprint. This limits the number of minutiae that can be extracted from the fingerprint and as such limits the number of common singular points between two impressions of the same fingerprint. The application of texture feature extraction will be tested using variety of fingerprint images to determine the most appropriate format for use within the embedded system. This thesis has focused on designing a fingerprint-based identification system that is highly expandable using the MATLAB environment. The main components that are defined within this thesis are the hardware design, image capture, image processing and feature extraction methods. Selection of the final system components for this electronic fingerprint identification system was determined by using specific criteria to yield the highest performance from an embedded processing environment. These platforms are very cost effective and will allow fingerprint-based identification technology to be implemented in more commercial products that can benefit from the security and simplicity of a fingerprint identification system.

Nutrition, growth and production of Cherax Destructor Clark, 1936 (Decapoda, Parastacidae)

In this study the nutrition, growth and production of C. destructor was examined. Selected nutritional requirements of juvenile animals were determined under controlled conditions with the aim of developing a pelleted diet for use in hatcheries, nurseries and growout situations. The best developed diet was assessed for its potential as a supplementary feed for animals cultured in earthen environments. The protein requirements were first determined simultaneously with an evaluation of the effect of replacing animal protein (fishmeal) by soybean meal. Juveniles were reared communally for 59 d on isoenergetic diets containing 15-30% protein and graded levels of soybean meal (0-60%, of protein). When soybean meal was included at a level of 40-60%, growth was reduced relative to that achieved with control diets containing 15% and 20% protein, but this was not the case at a 20% soybean meal substitution level. A two-way interaction occurred between dietary protein and soybean meal content. Higher protein feeds enabled higher soybean meal inclusion levels without significantly affecting growth. Protein increases of 5% produced better growth at the 40% and 60% soybean meal substitution levels. This effect was less pronounced in the control and the 20% soybean meal diets. Carcass %protein increased and %lipid decreased as dietary protein increased. A similar effect occurred by increasing the soybean meal level to 60%. No obvious trend in carcass moisture, energy, and ash occurred. A protein requirement of 30% was apparent when fish meal and soybean meal were included in diets at levels of 20% and 24% (dry matter) respectively. Alternative protein sources to soybean meal were subsequently identified. Juveniles were maintained for 12 weeks on isoenergetic diets containing 30% protein and differing in the primary source of protein used, with meat, snail, soybean, yabby, and zooplankton meals comprising the major protein ingredient. No significant difference occurred in mean weight (MW), percentage weight gain (%WG), SGR or survival among diets. Food conversion ratios (FCR) were low, with a minimum value of 0.95 for the snail-based diet. The apparent net protein utilisation (ANPU) varied from 29.6% (zooplankton-based diet) to 41.2% (snail-based diet). Carcass composition varied with diet, with the greatest difference occurring in carapace colour. Animals fed the zooplankton-based diet developed the strongest, most natural pigmentation. A new combination of previously used protein-based ingredients was subsequently tested with reference to two yabby species, Cherax albidus and Cherax destructor, that were grown simultaneously in identical conditions. Juvenile male animals were reared individually for 20 weeks on isoenergetic diets containing 15% or 30% protein with fish meal, soybean meal, yabby meal and wheat products forming the basis of the diets. C albidus grew the fastest and utilised the food the most effectively. Carcass composition was influenced by diet with the 30% protein diet resulting in an increase in carcass protein and ash and a decrease in carcass lipid and energy relative to the low protein diet. Carcass moisture and calcium were not affected by diet. The intermoult period (IP) was highly dependent on the premoult weight (W) but the mean moult increment (WI, as weight) was independent of the PM. The orbital carapace length (OCL) and the abdominal length (ABL) %moult increments generally declined with an increase in PM whereas the propus length (PL) %moult increment generally increased. The IP, WI, %OCL, %ABL, and %PL moult increments varied according to diet and to species. Elevated dietary protein caused a reduction to the IP (for similar sized animals) by 11 d and 7 d and an increase to the WI by 85% and 81% in C. albidus and C destructor respectively. Dietary induced morphological changes also occurred. Animals of a standard OCL (both species) had significantly larger abdomens when fed the higher protein diet. Growth on the best developed diet was compared to the growth obtained on a natural diet of freshwater zooplankton. Juveniles were reared individually for 12 weeks on the two diets. The MW, %WG and SGR were higher for the zooplankton diet. Carcass composition was influenced by diet and the zooplankton fed animals had a higher carcass %protein, %lipid, %ash and %fibre content and were more richly pigmented than animals fed pellets. The IP and the WI were highly dependent on the PM and varied according to diet; feeding with zooplankton reduced the IP by 1.2 days and increased the WI by 13.7% compared to pellets. Nutrient digestibility was determined for the pelleted diets evaluated in the growth trials. Protein digestibility (PD) and dry matter digestibility (DMD), using chromic oxide (Cr2O3) as an exogenous marker, were high for all diets, at around 93% and 83% respectively. Ash digestibility varied considerably from 17% to 73% for the snail and yabby meal diets respectively. Crude fibre digestibility was around 50% and probably indicates cellulase activity. Alternative markers to Cr2O3 were evaluated. Ash was considered to be the most suitable alternative to Cr2O3, providing a reasonable, albeit lower, estimate of nutrient digestibility. Cr2O3 and ash were preferentially excreted whereas fibre was retained in the digestive system for a longer period, consequently, the collection of a particular fraction of the deposited faeces (late or early) substantially affected the digestibility coefficients. In earthen-based environments, animals fed the best developed diet were compared to animals cultured using a forage crop of clover (Trifolium repens). Three supplementary feeding strategies representing varying levels of management intensity were evaluated in a series of trials conducted in ponds and pond microcosms. Growth on pellets consistently exceeded that obtained with the forage crop, with final MW being 67-159% higher than that using clover and appeared to be the result of direct pellet consumption and from a pellet fertiliser effect (on the sediment). Within-pond DMD and PD were high and similar for each treatment (DMD = 51-58%; PD = 89-92%). In the control pond, DMD and PD increased with each successive flood. The faecal egestion rate (PER) decreased with each successive flood in all ponds, and is negatively related to animal weight and to foregut fullness (FF) according to power curves. FF was consistently lowest in the control pond. Mean FF was 48.5%, 62.3%, and 26.7% for the pellet, crop and control ponds respectively. FF increased to the third flood in each pond. The foregut protein content was high in all samples and the mean values were 33.9%, 32.7% and 35.6% for the pellet, crop and control ponds respectively. Foregut ash was highly variable within each pond and is inversely related to the foregut protein content. In the control and pellet ponds the highest foregut ash content occurred during flood 1. The culture system (aquaria or pond) strongly influenced the composition of the foregut content. The foregut of animals fed the manufactured diet (B2) in ponds contained approximately 176% more ash and 5% more protein than the foregut of animals fed in bare-bottom tanks. The FF of the tank fed animals was approximately 45% higher than the FF of pond fed animals after a similar feeding period. Base-line yields for extensive production systems appeared to be around 400kg ha-1. The supplementary addition of T. repens produced yields of approximately 635kg ha-1 (in ponds) to around 1086kg ha-1 (in tanks). The sequential addition of cut-clover to tanks stimulated growth to levels approaching those achieved on pellets. Yabbies stocked into ponds at 15-20 m-2 with a mean weight of 2.67g and fed a 30% protein pelleted diet for 100 d, resulted in a yield of approximately 1117kg ha-1, but only 2% of the population were above a marketable size of 50g. The feed utilisation indices were better for animals reared on pellets in bare-bottom tanks than in earthen environments, indicating some degree of pellet wastage when natural feeds are simultaneously present. High apparent food conversion ratios and low protein efficiency ratios occurred when the forage crop was provided. A considerable quantity of the dry matter and protein content of the forage crop was either inefficiently utilised or directed into other production pathways. Sowing a forage crop into pond microcosms to which a pelleted diet was also provided, did not enhance growth performance. Pelleted feed inputs at a rate of approximately 129g m-2 to 198g m-2 (dry matter) and 38g -2 to 64g m-2 (protein) over 70-100 d resulted in acceptable growth and feed utilisation indices for animals reared in ponds and pond microcosms. Forage crop inputs of approximately 533g m-2 to 680g m-2 (as dry matter) or 84g m-2 to 177g m-2 (as protein) over a 70-100 d period produced reasonable growth rates but poor feed utilisation indices. Low inputs of dry matter (from 113-296g m-2) and protein (from 24-54g m-2) from clover were sufficient to maintain high growth rates in pond microcosms for around 28 d. In ponds, a very low level of 21g m-2 (dry matter) and 4.3g m-2 (protein) was sufficient for around 3 weeks. Forage depletion appeared to occur beyond week 3-4 and was probably a major growth limiting factor. The mean hepatosomatic index (HSI) was 9.44, 7.68, and 6.79 for the pellet, crop, and control ponds respectively. The relationship between hepatopancreas weight and overall animal weight was significantly different between treatments. The hepatopancreas of pellet-fed animals had the highest %lipid and lowest %ash, %protein, %carbohydrate and %moisture content. In terms of absolute quantities, the only major difference in hepatopancreas composition between treatments occurred for lipid and dry matter content. The hepatopancreas of the pellet-fed animals was a cream/cream-yellow colour and was very fragile, whereas in the other ponds it was a more ‘natural’ bright yellow colour and was structurally more robust. C. destructor has a capacious foregut, being approximately 5 times the volume of similar sized Penaeids. The foregut volume (V, ml) of the yabby is related to animal weight (W, g) according to V = 0.048 W0.9543. Animals that were starved for 96 h and then fed diet B2 were almost completely foil after 30 min. The ‘apparent enzymatic response’ of animals fed various natural and artificial diets in tanks was evaluated. Nutrient processing time and the enzymatic response following ingestion appeared to be regulated by the chemical and physical properties of the diet. For the natural feeds, foregut protein was 1.2% higher (for zooplankton) and up to 300% higher (for detritus) than dietary protein, whereas ash was 7.5% higher (zooplankton) and 46-63% lower (detritus) than dietary ash. For animals fed diet B2 after 48 h without food, FF was approximately half that of 96 h starved animals after a similar feeding period but foregut protein and ash contents were similar. Finally, the physiological and morphological attributes elucidated in this study are discussed with reference to the ecology of the yabby. High growth rates, excellent feed utilisation indices and high digestibility coefficients for a wide range of diet-types illustrate nutritional flexibility. A capacious foregut, a large hepatopancreas with a high energy storage capacity, the ability to partition and preferentially excrete the low nutrient value inorganic component of the diet, the capacity to alter body form, nutrient processing time and enzymatic secretions in relation to diet-type, and modified behaviour according to feed availability also demonstrate plasticity/adaptability/flexibility. The combined effect of these important characteristics ensures survival in environments that may be adverse and highly variable in terms of nutrient availability. Collectively the morphological and digestive traits elucidated in this study reflect the generalist-type nature of C destructor and indicate that a polytrophic classification still seems appropriate. Several priority areas for further nutrition research are identified and recommendations are made regarding the best-practices to use in the commercial culture of the yabby. Of paramount importance is the further clarification of the nutritional requirements and feeding preferences of animals in various phases of development.