The effect of hook/bait size and angling technique on the hooking location and the catch of recreationally caught black bream Acanthopagrus butcheri

The black bream Acanthopagrus butcheri recreational fishery is the largest estuarine fishery in Victoria. This fishery is managed through legal-minimum length and daily bag limits. The success of this management strategy requires a high survival rate for released fish. Deep-hooking is known to reduce the chance of fish survival after recreational capture and release. This study investigated the potential to reduce deep-hooking and the number of under-size A. butcheri caught by varying angling gear and techniques. Three sizes of long shank hook (small [size 8], medium [size 4] and large [size 1/0]) and two angling techniques (slack line and tight line) were tested for their deep-hooking rates and selectivity characteristics. Increasing the hook size from small to large decreased the likelihood of deep-hooking by 6.6 times (95% CI 2.3–16.3 times). Fishing with a tight line instead of a slack line decreased the chance of deep-hooking by almost 100% (95% CI 0.8–3.6). Fishing with a large hook instead of a small hook significantly (F = 6.71, df = 2, P = <0.001) increased the mean A. butcheri length, although this mean size increase was less than 1 cm. This study was able to identify angling gear and angling technique manipulations that reduced the rate of deep-hooking when targeting A. butcheri in Victorian estuaries.

Some aspects of photosynthetic characteristics in a set of perennial irrigation reservoirs located in five river basins in Sri Lanka

Phytoplankton primary productivity of eleven irrigation reservoirs located in five river basins in Sri Lanka was determined on a single occasion together with light climate and nutrient concentrations. Although area-based gross primary productivity (1.43–11.65 g O2 m−2 d−1) falls within the range already established for tropical water bodies, net daily rate was negative in three water bodies. Light-saturated optimum rates were found in water bodies, with relatively high algal biomass, but photosynthetic efficiency or specific rates were higher in water bodies with low algal biomass, indicating nutrient limitation or physiological adaptation of phytoplankton. Concentrations of micronutrients and algal biomass in the reservoirs are largely altered by high flushing rate resulting from irrigation release. Underwater light climate and nutrient availability control the rate of photosynthesis and subsequent areabased primary production to a great extent. However, morpho-edephic index or euphotic algal biomass in the most productive stratum of the water column is not a good predictor of photosynthetic capacity or daily rate of primary production of these shallow tropical irrigation reservoirs.

Integrated model for thermo-mechanical controlled process in rod (or bar) rolling

This study presents an integrated model for computing the thermo-mechanical parameters (cross-sectional shape of workpiece, the pass-by-pass strain and strain rate and the temperature variation during rolling and cooling between inter-stands) and metallurgical parameters (recrystallisation behaviour and austenite grain size—AGS), to assess the potential for developing “Thermo-Mechanical Controlled Process” technology in rod (or bar) rolling, which has been a well-known technical terminology in strip (or plate) rolling since 1970s.

The advantage of this model is that metallurgical and mechanical parameters are obtained simultaneously in a short computation time compared with other models. The model has been applied to a rod mill to predict the exit cross-sectional shape, area and AGS per pass by incorporating the equations for AGS evolution being used in strip rolling. At the finishing train of rod mills, the strain rates reach as high as 1000–3000 s−1 and the inter-pass times are around 10–60 ms.

The results show that the proposed model is an efficient tool for evaluating the effects of process-related parameters on product quality and dimensional tolerance of the products in rod (or bar) rolling. The results of the simulation demonstrated that the equation for AGS evolution being used in strip rolling might have limitations when applied directly to rod rolling at a high strain rate.

A physical based modeling approach for the dynamic behavior of ultrafine grained structures

This paper discusses some experimental results on the influence of grain refinement on the final mechanical properties of IF and microalloyed steels designed for auto-body components. It shows also some modeling approaches to understanding the dynamic behavior of fine-rained materials. The Zerilli–Armstrong (Z–A) and Khan–Huang–Liang (KHL) models for studied steels were implemented into FEM code in order to simulate the dynamic compression tests with different strain rates.

Changing risk behaviours for non-communicable disease in New Zealand working men - is workplace intervention effective?

Aims. To evaluate the effectiveness of a health promotion
programme targeting dietary behaviours and physical
activity among male hourly-paid workers and to explore
demographic and attitudinal influences on dietary patterns
at baseline.
Methods. A controlled field trial compared workers at one
intervention and one control worksite. The intervention
comprised nutrition displays in the cafeteria and monthly
30-minute workshops for six months. Key outcome
measures at six and twelve-months were self-reported
dietary and lifestyle behaviours, nutrition knowledge, body
mass index (BMI), waist circumference and blood pressure.
Results. 132 men at the intervention site and 121 men at the
control site participated in the study and a high retention rate
(94% at 6-months and 89% at 12-months) was achieved. At
baseline, 40% of the total sample (253) were obese, 30% had
elevated blood pressure, 59% indicated an excessive fat intake
and 92% did not meet the recommended vegetable and fruit
intake. The intervention reduced fat intake, increased
vegetable intake and physical activity, improved nutrition
knowledge and reduced systolic blood pressure when
compared to the control site. There was no difference in
change in mean BMI or waist circumference. Reduction in
BMI was associated with reduction in fat intake.
Discussion. Low intensity workplace intervention can
significantly improve reported health behaviours and
nutrition knowledge although the impact on more
objective measures of risk was variable. A longer duration
or more intensive intervention may be required to achieve
further reduction in risk factors.

固化条件对热塑增韧环氧树脂的固化动力学和相分离的影响

Thermoplastic toughened epoxy resins are widely used as matrices in modern prepreg systems.Different curing conditions play a great role in affecting the cure kinetics and phase behaviour of thermoplastic modified epoxies which further result in different mechanical properties of polymer matrix composites.Since the morphology of the cured thermoplastic/epoxy blends is directly related to the mechanical properties,it is essential to control processing conditions for obtaining desirable morphology.A polyethersulphone (PES) modified multifunctional epoxies,triglycidylaminophenol (TGAP) and tetraglycidyldiaminodiphenylmethane (TGDDM),was used for investigation.The cure kinetics and cured morphology of polymer blends heated at different heating rates and cured at different temperature were studied.It is shown that higher cure temperature and higher heating rate display similar effects in the epoxy conversion and the domain size of phase separated structure.

Cardiovascular surveys : manual of operations

Cardiovascular disease (CVD) is the leading cause of death and hospitalization in both men and women in nearly all countries of Europe. The most frequent forms of CVD are those of an atherosclerotic origin, mainly ischaemic heart disease, stroke and heart failure. The magnitude of the problem contrasts with the usual paucity and poor quality of data available on incidence and prevalence of CVD, except for few rigorous but limited studies.

The objectives of the health interview and health examination surveys (HIS/HES) are to evaluate the frequency and the distribution of the disease, to evaluate trends and treatment effectiveness, to estimate risk factors distribution and prevalence of high risk conditions and to monitor prevention programmes.

According to the EUROCISS project (EUROpean Cardiovascular Surveillance Set) recommendations, surveys are aimed at describing the prevalence of the following CVD conditions: myocardial infarction, heart failure, angina pectoris, peripheral arterial disease, stroke, and ischaemic heart disease.

HIS and HES were developed to supplement information collected from routine databases and population-based registers to implement consistent public health policies. HIS can be repeated periodically in a new sample of the population, or can follow up over time the population recruited at baseline. Procedures and methods to collect information from participants include self-administered questionnaires, direct interviewer-administered questions and telephone interviews. A minimum set of questions to be administered every year, along with a longer, more detailed module to be administered periodically are recommended to evaluate CVD prevalence. The addition of HES provides more detailed and objective information that can be used to improve estimates regarding prevalence of both risk factors and disease status.

The selection of more specialized CVD-specific tests will depend on the objective the survey is designed to achieve, the assumed response rate and the cost and time considerations. For HES on CVD the minimum required is to perform the following measurements: height, weight, blood pressure, waist circumference, total and high density lipoprotein-cholesterol and glucose assay in a nonfasting blood sample. The next appropriate step would be to perform an electrocardiogram. High costs usually make HES difficult to carry out.

Standardization of measurements, training of personnel and quality control are essential to assure reliable data. A high response rate is extremely important, as nonrespondents tend to have different health characteristics from the rest of the sample and their omission therefore results in bias.

This manual of operations is intended for health professionals and policy makers and provides a standardized and simple model for the implementation of a CVD survey.

The employers' perspective of the impact of RICS education reform on building surveying

Purpose: This paper seeks to present the second part of research funded by the RICS Education Trust to investigate the impact of the 2001 education reforms on Building Surveying. The first part of the research involved the collection of data from university course leaders.

Design/methodology/approach: This research involved the collection of data from large national, mainly London-based, employers of building surveyors at a focus group meeting.

Findings: The paper finds that issues of concern to these employers include the extent of construction technology knowledge of graduates, the delivery of contract administration, the placement year, post-graduate conversion courses and the high referral rate for the Assessment of Professional Competence (APC). Recommendations include advice to universities on the design of building surveying undergraduate and conversion courses, a call for further research on the high APC referral rate, and greater liaison between industry and universities.

Research limitations/implications: The main limitation of the research is that the employers from whom data were collected were mainly large, national firms. Further research would be required to elicit the views of smaller regional organisations.

Practical implications: Both parts of this RICS Education Trust funded research provides a foundation for the Building Surveying Faculty of the RICS to complete their review of the education and training of building surveyors.

Originality/value: The research provides useful data on the impact of RICS education reform on building surveying, but mainly large, national firms.

RICS education reform and building surveying : the employers' view

This paper presents the second part of research funded by the RICS Education Trust to investigate the impact of the 2001 education reforms on building surveying. The research involved the collection of data from large national, mainly London-based, employers of building surveyors. Issues of concern to these employers include the extent of construction technology knowledge of graduates, the delivery of contract administration, the placement year, post-graduate conversion courses and the high referral rate for the Assessment of Professional Competence (APC). Recommendations include advice to universities on the design of building surveying undergraduate and conversion courses, a call for further research on the high APC referral rate and greater liaison between industry and universities.

Phospholipase activity in human mesenteric ischaemia and infarction

Currently, diagnostic tests for mesenteric ischaemia and infarction are inadequate due to poor sensitivity and specificity. In addition, many potential markers appear too late to be clinically useful. At present, definitive diagnosis can only be made at the time of surgery, which is not ideal as surgery is often to be avoided in critically ill and elderly patients. A clinically useful, minimally invasive test is likely to decrease the currently very high mortality rate and allow monitoring of 'at risk' patients during their hospital stay. A two-dimensional electrophoresis based proteomic approach was undertaken to assess plasma protein differences between patients with surgically confirmed bowel infarction and control Intensive Care patients. The major protein differences were found to be members or variants of acute phase proteins. Serum amyloid A showed the largest difference between the two patient groups, and this protein was investigated in greater depth. An analysis was performed to compare the diagnostic ability of several commonly used indicators of critical illness and bowel infarction with serum amyloid A and phospholipase A2. Although none of the variables were ideal for clinical use, plasma phospholipase A2 activity showed the best discriminatory power, as determined by Receiver Operating Characteristic curves. From a review of the literature, phospholipase AI (PLA2) appeared to be increased in the bowel as a result of ischaemia and infarction. In one patient, matched tissues were obtained, and PLA2 activity was found to be significantly higher in infarcted bowel tissue compared to ischaemic bowel tissue. PLA2 activity was significantly greater in bowel lumen than tissue, suggesting that the protein was being released, and may enter the circulation. PLA2 activity was increased in the plasma of bowel infarction patients compared with control patients, though the difference was not significant. The phospholipase activity exhibited a number of similarities to typical phospholipase A2 proteins, but also showed a number of inconsistent characteristics. For this reason, we wished to identify the protein responsible for the increased phospholipase activity in infarcted human bowel. The PLA2 activity in human bowel could not be abolished by immunoprecipitation of the PLA2 isoforms IIA (well described in bowel) and V (a closely related isoform). To investigate these proteins, a native urea protein gel devised for snake venom phospholipase A2 was modified for use with mammalian phospholipase AI. The modified gel was used to show that the protein with phospholipase activity from infarcted gut was different from normal gut PLA2 and type IIA PLA2. A number of extensions were devised for these native gels and were found to be useful both in this investigation and for venom investigations. Protein purification was undertaken to identify the protein responsible for the increased phospholipase activity in infarcted bowel. Protein was purified from infarcted human bowel using a number of techniques that exploited unusual characteristics of the protein. The purification techniques each retained the native activity of the protein and the purification could therefore be monitored with a phospholipid hydrolysis assay at each stage. The protein identified by mass spectrometry was an excellent match for cyclophilin B, an inflammatory protein that had previously been identified in rat bowel at the mRNA level (Hasel et al, 1991, Kainer & Doris, 2000). As the purification progress had been monitored throughout with a phospholipid hydrolysis assay, cyclophilin B was an unexpected identification, as it is not known to have phospholipase activity. Cyclophilin B was removed from the highly purified samples via immunoprecipitation and this process abolished all phospholipase activity. The addition of cyclosporin A, (the pharmaceutical ligand of cyclophilin B), did not effect the phospholipase activity. Cyclophilin B protein was found in normal and infarcted human bowel using Western blotting. Cyclophilin B protein also appeared to be present in the bowel lumen and plasma of several patients with bowel infarction, but not in control patients. Immunohistochemistry confirmed the ubiquitous nature of cyclophilin B that had been reported by other groups. This project has investigated the use of two dimensional gel electrophoresis based proteomics to identify proteins present in the plasma of patients with confirmed bowel infarction and control intensive care patients. The major protein classes observed were members of the acute phase proteins, which highlights the need for pre-fractionation of plasma to identify lower abundance, disease associated proteins. A series of potential plasma markers were compared using Receiver Operating Characteristic Curves. Although no ideal marker was clear from this analysis, phospholipase activity appeared to warrant further investigation. Phospholipase activity was investigated in human infarcted bowel. Protein purification identified cyclophilin B as a bowel protein that showed unusual phospholipid hydrolysing activity. Cyclophilin B is a ubiquitous protein in intestinal cell types in both normal and infarcted tissue. There appears to be release of cyclophilin B into bowel lumen and plasma under conditions of mesenteric ischaemia and infarction.

Mechanical properties of aged Mg-4Y-3RE alloy

This paper describes tensile properties of a peak-aged Mg-4Y·3RE alloy at room temperature to 823 K with 10^-5 - 10^-1 s^-1. The Mg alloy exhibited high strength (> 250 MPa) at room temperature to 473 K. However. the strength rapidly decreased at 573 K. It is suggested that a large decrease in strength at 573 K is attributed to grain boundary sliding. Also, elongation increased rapidly at 723 - 823 K. This is likely to arise from the relatively high strain rate sensitivity of about 0.3 due to the glide-controlled dislocation creep.

Deformation modes and anisotropy in magnesium alloy AZ31

A strongly textured sheet of magnesium alloy AZ31 has been subjected to tensile testing at temperatures between ambient and 300°C. Structures have been examined by optical and transmission electron microscopy and also by atomic force microscopy to quantify surface displacements seen at grain boundaries. Plastic anisotropy varies strongly with test temperature as was observed previously by Agnew and Duygulu. The present findings do not support the view that crystallographic <c + a> becomes a major contributor to deformation at higher temperatures. Rather, the material behaviour reflects an increasing contribution from grain boundary sliding despite the relatively high strain rate (I 0^-3 s^-1) used in the mechanical tests.

Attitudes of mental health staff to routine outcome measurement

Background: Routine outcome measurement is mandated in public mental health services in Australia, but uptake and compliance are variable. This may be because of uncertainties and resistances among clinicians.
Aims: To survey attitudes and practices to routine outcome measurement among staff in adult area mental health services and to elucidate their correlates.
Method: As part of a larger study, a specifically designed questionnaire was distributed to all staff.
Results: A high return rate was achieved. A wide range of opinion was found. Staff who had attended training reported the measures as easier to use than those who had not. Staff who had recently seen feedback rated outcome measures as more valuable but less easy to use than those who had not seen feedback. Compared to other disciplines, medical staff and psychologists tended to rate outcome measures as less useful.
Conclusions: The results have implications for the implementation and sustainability of routine outcome measurement. They highlight the need for staff to receive targeted training and usable reports, and to have access to resources to extract meaning and value from outcome measures.

Challenges of inter-generational succession in the Chinese Australian family business

Chinese immigrants have long been a feature of Australia's population mix and play a critical role in the country's economic activities, with particular contribution by Chinese family-owned businesses. Although these family-owned businesses can generate and significantly improve the financial wealth which stems from the family's original fortune, most Chinese family businesses are relatively short-lived, rarely extending beyond one generation. The high mortality rate in family businesses points primarily to the challenges of management succession. There is recognition that inter-generational succession is essential for both the profitability of Chinese family businesses and the welfare of the family as a whole. However, the intentions of inter-generational pursuit of continuity can be subject to the different goals and interests of key participants, as well as the surrounding context in which the business develops. This paper presents issues pertaining to the inter-generational diversity that might challenge the business continuity of Chinese family businesses, through the identification of how individuals perceive, relate to and initiate the succession process.

Residential auction clearance rates – what do they really mean?

The residential market in Melbourne is often referred to as the ‘auction capital of the world’ with approximately 30-35% of housing transfers undertaken via the auction process, most of which are conducted on the weekend and then reported in the media the following day. The most quoted measurement of auction success is via the clearance rate which simply indicates the proportion of signed contracts of sale within the auction process. At the same time the clearance rate can have a relatively large variance where the residential market can traditionally range from very good (i.e. a high clearance rate) to very poor (i.e. a low clearance rate). The subsequent effect on the market can directly increase or decrease demand, predominantly based only on this single measure of the perceived level of auction clearance rates only.

This paper examines the concept of the auction clearance rates and the heavy reliance on the only one measure of success (i.e. the clearance rates), regardless of other variables. The emphasis is placed on the auction clearance rate as one measure of demand in the housing market but within the context of the definition of market value i.e. willing buyer-willing seller. This is supported by a discussion about other variables including the asking price, the auction process itself, marketing considerations and seasonal adjustments. The findings provide an insight into how to correctly interpret the auction clearance rate in the context of the overall supply-demand interactions. Whilst the auction process is clearly an integral part of the residential transfer process it is essential that the auction clearance rate is used with caution and also in conjunction with other variables.