Partial purification and characterization of limonoate dehydrogenase from Rhodococcus fascians for the degradation of limonin

An extracellular limonoate dehydrogenase was purified 10-fold from a cell-free extract of Rhodococcus fascians by ammonium sulfate precipitation, dialysis, and ultrafiltration. This purified dehydrogenase catalyzed the
conversion of limonoate to 17-dehydrolimonoate. The enzyme showed optimum activity at pH 8.0 and 40oC, with K_m value of 0.9 µM, and requires Zn ions and sulfhydryl groups for catalytic action. The enzyme activity was inhibited by Hg²⁺ and NaN₃ ions. The degradation of limonin (66%) in Kinnow mandarin juice was successfully demonstrated with partially
purified limonoate dehydrogenase. With scale-up preparation of limonoate dehydrogenase, a successful debittering operation of fruit juices appears feasible.

Collapse of an avifauna : climate change appears to exacerbate habitat loss and degradation

Aim. We characterized changes in reporting rates and abundances of bird species over a period of severe rainfall deficiency and increasing average temperatures. We also measured flowering in eucalypts, which support large numbers of nectarivores characteristic of the region.

Location.  A 30,000-km2 region of northern Victoria, Australia, consisting of limited amounts of remnant native woodlands embedded in largely agricultural landscapes.

Methods. There were three sets of monitoring studies, pitched at regional  (survey programmes in 1995–97, 2004–05 and 2006–08), landscape (2002–03 and 2006–07) and site (1997–2008 continuously) scales. Bird survey techniques used a standard 2-ha, 20-min count method. We used Bayesian analyses of reporting rates to document statistically changes in the avifauna through time at each spatial scale.

Results. Bird populations in the largest remnants of native vegetation (up to 40,000 ha), some of which have been declared as national parks in the past decade, experienced similar declines to those in heavily cleared andscapes. All categories of birds (guilds based on foraging substrate, diet, nest site; relative mobility; geographical distributions) were affected similarly. We detected virtually no bird breeding in the latest survey periods. Eucalypt flowering has declined significantly over the past 12 years of drought.

Main conclusions. Declines in the largest woodland remnants commensurate with those in cleared landscapes suggest that reserve systems may not be relied upon to sustain species under climate change. We attribute population declines to low breeding success due to reduced food. Resilience of bird populations in this woodland system might be increased by active management to enhance habitat quality in existing vegetation and restoration of woodland in the more fertile parts of landscapes.

Thermal degradation kinetics and morphology of natural rubber/silica nanocomposites

A novel natural rubber/silica (NR/SiO₂) nanocomposite with a SiO₂ loading of 4 wt% is developed by incorporating latex compounding with self-assembly techniques. The SiO₂ nanoparticles are homogenouslydistributed throughout the NR matrix as spherical nano-clusters with an average size of 75 nm. In comparison with the host NR, the thermal resistance of the nanocomposite is significantly improved. The degradation temperatures (T), reaction activation energy(E), and reaction order (n) of the nanocomposite are markedly higher than those of the pure NR, due to significant retardant effect of the SiO₂ nanoparticles.

Design and degradation modelling through artificial neural networks

Automotive is one of the major manufacturing industries in Australia that requires extensive reliability test for the components used in vehicles. To achieve a shorter time-to-market and a highly reliable product while reducing the amount of physical prototyping, there is a growing need for better understanding on the effect that the design parameters have on the degradation of the product. This paper presents comprehensive descriptions of applying Artificial Neural Network (ANN) to capture the relationships between design and degradation. Consequently, two models of different practical significance are created as the result of the work. The vision of the models is to be used by the testers and designers as a guideline in design evaluation, so that time-consuming and expensive iterations of the product developmental cycle can be reduced substantially. The degradation of the folding force of a mechanical system is used to illustrate our approach.

Study on thermooxidative degradation of poly(vinyl alcohol)/silica nanocomposite prepared with SAM technique

The thermooxidative degradation of poly (vinyl alcohol)/silica (PVA/SiO2) nanocomposite prepared with self-assembly monolayer (SAM) technique is investigated by using a thermogravimetry (TG) and Fourier transform infrared spectroscopy coupled thermogravimetry (FTIR/TG). The results show that although the thermooxidative degradation process of prepared nanocomposite is similar to that of the pure PVA, its thermooxidative stability has been greatly improved.

Poly (vinyl alcohol) / silica nanocomposites: morphology and thermal degradation kinetics

The morphology of self-assembled poly(vinyl alcohol)/silica (PVA/SiO₂) nanocomposites is investigated with atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is found that the SiO₂ nanoparticles are homogenously distributed throughout the PVA matrix in a form of spherical nano-cluster. The average size of the SiO₂ clusters is below 50 nm at the low contents (SiO₂ ≤ 5 wt%), while particle aggregations are clearly observed and their average size markedly increases to 110 nm when 10 wt% SiO₂ is loaded. The thermogravimetric analysis (TGA) shows that the nanocomposite significantly outperforms the pure PVA in the thermal resistance. By using a multi-heating-rate method, the thermal degradation kinetics of the nanocomposite with a SiO₂ content of 5 wt% is compared to the PVA host. The reaction activation energy (E) of the nanocomposite, similar to the pure PVA, is divided into two main stages corresponding to two degradation steps. However, at a given degradation temperature, the nanocomposite presents much lower reaction velocity constants (k), while its E is 20 kJ/mol higher than that of the PVA host.

Degradation of the strength of porous titanium after alkali and heat treatment

Porous titanium with a porosity of 75% was fabricated by space-holder sintering through powder metallurgy. The effect of the alkali and heat treatment on the strength of the porous titanium was investigated. Results indicated that the alkali and heat treatment led to a significant decrease in the strength of the porous titanium, whichwas causedby the degradation due to corrosion of the struts of the porous titanium with a layer of the reaction products, grain pullout and micro-cracks.

Degradation of VOCs using non-film titania in a hybrid process

This study reports the preparation and characterization of titanium dioxide (TiO2)-based non-film catalysts, reactor design and their utilization in a hybrid dynamic degradation of acetone and toluene. The behaviours of deactivation and regeneration of catalysts are explored as well. The regression equations of conversion rate in differing operating modes are concluded.

Quantifying rubber degradation using NMR

Ageing can lead to the degradation of the tensile properties of natural rubber. The ageing process causes changes in the polymer segmental motion as well as the chemical structure, both of which can be monitored using nuclear magnetic resonance (NMR) spectroscopy. This work demonstrates that NMR can quantify rubber degradation due to ageing, and also that relatively simple NMR equipment can be used. This simpler equipment can be made portable and so could give a simple and fast indication of the condition of rubber in service. The 1H NMR transverse relaxation time, T2, and the 13C NMR spectrum using cross polarization and magic angle spinning (CP MAS) for samples taken at various levels of a degraded natural rubber liner were compared. These experiments showed that, as the level of degradation increased, the 1H NMR transverse relaxation time decreased. The 13C spectra showed considerable peak broadening, indicative of decreased mobility with increased level of degradation as well as the presence of degradation products. Further investigations using lower powered NMR equipment to measure the 1H NMR transverse relaxation times of two different series of natural rubbers were also performed. This work has shown that this simpler method is also sensitive to structural and mechanical property changes in the rubber. This method of monitoring rubber degradation could lead to the non-destructive use of NMR to determine the condition of a part in service.

Predicting future ecological degradation based on modelled thresholds

Threshold models are becoming important in determining the ecological consequences of our actions within the environment and have a key role in setting bounds on targets used by natural resource managers. We have been using thresholds and related concepts adapted from the multiple stable-states literature to model ecosystem response in the Coorong, the estuary for Australia’s largest river. Our modelling approach is based upon developing a state-and-transition model, with the states defined by the biota and the transitions defined by a classification and regression tree (CART) analysis of the environmental data for the region. Here we explore the behaviour of thresholds within that model. Managers tend to plan for a set of often arbitrarily-derived thresholds in their natural resource management. We attempt to assess how the precision afforded by analyses such as CART translates into ecological outcomes, and explicitly trial several approaches to understanding thresholds and transitions in our model and how they might be relevant for management. We conclude that the most promising approach would be a mixture of further modelling (using past behaviour to predict future degradation) in conjunction with targeted experiments to confirm the results. Our case study of the Coorong is further developed, particularly for the modelling stages of the protocol, to provide recommendations to improve natural resource management strategies that are currently in use.