Compositional effects on structure and transport properties in a polyelectrolyte gel

The copolymerization of lithium 2-acrylamido-2-methyl-1-propane sulfonate (LiAMPS) with N,N ′-dimethylacrylamide has yielded polyelectrolyte systems which can be gelled with an ethylene carbonate/N ′,N ′-dimethylacetamide solvent mixture and show high ionic conductivities. 7Li linewidth and relaxation times as well as 1H NMR diffusion coefficients have been used to investigate the effect of copolymer composition as well as copolymer concentration in the gel electrolyte with respect to ionic transport and polyelectrolyte structure. It appears that ion association is likely even in the case of low lithium salt concentration; however a rapid exchange exists between the associated and non-associated lithium species. Beyond 0.2 M of LiAMPS, both the conductivity and solvent diffusion reach a plateau, whilst lithium ion linewidth and spin-spin relaxation are suggestive, on average, of a less mobile species. The thermal analysis data is also supportive of this association effectively leading to a form of phase separation on the nanoscale, which gives a lower overall activity of lithium ions in the solvent rich regions beyond about 0.2 M of LiAMPS, thereby leading to an increase in the final liquidus temperature of the binary liquid solvent from –9 to +5°C.

Gel electrolytes based on lithium modified silica nano-particles

In this work lithium modified silica (Li-SiO₂) nano-particles were synthesized and used as a single ion lithium conductor source in gel electrolytes. It was found that Li-SiO₂ exhibited good compatibility with DMSO, DMA/EC (a mixture of N,N-dimethyl acetamide and ethylene carbonate) and the ionic liquid, N-methyl-N-propyl pyrrolidinium bis(trifluoromethylsulfonyl) amide ([C₃mpyr][NTf₂]). Several gel electrolytes based on Li-SiO₂ were obtained. These gel electrolytes were investigated by DSC, solid state NMR, conductivity measurements and cyclic voltammetry. Conductivities as high as 10⁻³ S/cm at room temperature were observed in these nano-particle gel electrolytes. The results of electrochemical tests showed that some of these materials were promising for using as lithium conductive electrolytes in electrochemical devices, with high lithium cycling efficiency evident.

Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

Boroxine ring compounds as dissociation enhancers in gel polyelectrolytes

In order to combine the advantages of both traditional gel electrolytes and polyelectrolytes, a novel polyelectrolyte which incorporates a boroxine ring-containing anion-trapping agent has been explored. Poly(lithium 2-acrylamido-2-methyl-1-propanesulfonate) (PAMPSLi), ethylene carbonate (EC) and tri(methoxyethoxyethoxyethoxy)boroxine (TME₃Bx) were combined to prepare various gel systems. The thermal properties and conductivities of these gels have been investigated. A conductivity of 10^−3.6 S cm⁻¹ at 20 °C has been achieved in a gel polyelectrolyte system with a molar ratio of [EC]:[TME3Bx]:[Li⁺]=24:1.7:1. Temperature-dependent NMR measurements indicated that a significant interaction exists between the boroxine ring and the polyelectrolyte.

In situ photopolymerization of a gel ionic liquid electrolyte in the presence of iodine and its use in dye sensitized solar cells

We report for the first time an in situ photopolymerization of model co-monomers, 2-hydroxyethyl methacrylate (HEMA) and tetra (ethylene glycol) diacrylate (TEGDA), in an IL electrolyte containing I₂ for DSSCs. TiO₂ nanoparticles were used as the photo-initiator and co-gelator in a charge transfer polymerization reaction. The gel-IL polymer obtained was characterized in terms of the diffusion properties of the electrolyte. Preliminary results from DSSCs assembled using the gel-IL electrolyte showed energy conversion efficiency of 3.9% at 1 sun (AM1.5) and 5.0% at 0.39 sun illumination.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

A gel-capture assay for characterizing the sialyl-glycan selectivity of influenza viruses

Sialic acids (SA) usually linked to galactose (Gal) in an α2,6- or α2,3-configuration are considered the main cell receptors for influenza viruses, in particular for their hemagglutinins (HA). The typing of influenza virus HA receptor selectivity is relevant for understanding the transmissibility of avian and swine viruses to the human population. In this study we developed a simple and inexpensive gel-capture assay (GCA) of the influenza virus HA receptor-binding selectivity. Its principle is the binding of soluble influenza virus to pentasaccharide analogs, representatives of receptors of human and avian influenza viruses, immobilized on a gel resin. The human and avian analogs consisted of a sialyllactose-N-tetraose c (LSTc) [Neu5Ac(α2,6)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc] and a sialyllactose-N-tetraose a (LSTa) [Neu5Ac(α2,3)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc], respectively. Following equilibration, the unbound virus is washed away and the bound one is assayed via HA by densitometry as a function of the analog concentration. Using GCA, the receptor selectivity of three influenza viruses of different HA subtype was investigated. The results showed that the egg-adapted A/California/07/2009 (H1N1) virus exhibited an avian α2,3-linked LSTa selectivity, however, it retained the ability to bind to the α2,6-linked LSTc human receptor analog. Influenza B virus B/Florida/4/2006 showed α2,6-linked LSTc selectivity and a poor α2,3-linked LSTa avidity. The H3N2 virus A/Wisconsin/15/2009 displayed almost comparable avidity for both receptor analogs with a marginally greater α2,3-linked LSTa avidity. The described assay protocol provides a simple and rapid method for the characterization of influenza virus HA receptor binding selectivity. Keywords: influenza virus; hemagglutinin; receptor; sialyllactose-N-tetraose; gel-capture assay.

Photochromic wool fabric by sol-gel coating and photochromism

The application of photochromism in textiles has potential to create new opportunities to develop fancy colour-changing effects in fashionable textiles, as well as smart garments capable of protecting wearers from the effects of UV irradiation and responding to environmental changes. This book presents a coating method for achieving quick and obvious photochromic effects on wool fabrics using conventional photochromic dyes and hybrid silicas. It covers details about fabricating different types of photochromic dye-silica coatings, measuring their optical performance, assessing some physical characterisations of the coatings, and measuring the effects of the coatings on fabric performance.

Synthesis of high surface area amorphous tin-zinc oxides by a sol-gel method

A new method to synthesize conducting oxide nanoparticles with low photocatalytic activity was investigated. Initially, the preparation of amorphous ZnO-SnO2 solid solution nanoparticles was studied using a sol-gel technique. It was found that X-ray amorphous nanopowders with low photocatalytic activity were produced when the precipitates were heat treated below 500 °C. However, FT-IR data showed that the sample may not be an oxide semiconductor. A mixture of ZnO and SnO2 crystalline nanoparticles was also produced at 800 °C and found to have much reduced photoactivity than commercial ZnO nanoparticles having a similar specific surface area.

Local structure and photocatalytic property of sol-gel synthesized ZnO doped with transition metal oxides

ZnO nanoparticles doped with up to 5 at% of Co and Mn were prepared using a co-precipitation method. The location of dopant ions and the effect of doping on the photocatalytic activity were investigated. The crystal structure of nanoparticles and local atomic arrangements around dopant ions were analyzed by X-ray absorption spectroscopy. The results showed that the Co ions substituted the Zn ions in the ZnO wurtzite phase structure and induced lattice shrinkage, while Mn ions were not completely incorporated in the crystal lattice. The photocatalytic activity under simulated sunlight was characterized by the decomposition of Rhodamine B dye molecules. It was revealed that Co-doping strongly reduced the photocatalytic activity but Mn-doping showed a weaker effect on the reduction of the photoactivity.