Protein fiber particles for biomedical applications

Ultrafine protein particles have been fabricated from natural fibres, such as silk and wool. Our studies suggested that particles could be used for fabricating tough macro-porous composites scaffolds for tissue engineering. They are also efficient for reversible binding of metal ions. We are currently analyzing the sorption properties, biocompatibility and biodegradability of a range of particles to evaluate possibility for biomedical and healthcare applications.

Biodegradation of pentachlorophenol in a membrane bioreactor

Pentachlorophenol (PCP) is a toxic chemical, often used in the formulation of pesticide, herbicide, anti fungal agent, bactericide and wood preservative. This study is aimed at evaluating the potential of membrane bioreactor (MBR) to treat PCP contaminated wastewater. Synthetic wastewater with COD of 600 mg/L was fed into the MBR at varied PCP loading rate of 12–40 mg/m3/d. A PCP removal rate of 99% and a COD removal rate of 95% were achieved at a hydraulic retention time of 12 hs and a mixed liquor suspended solids (MLSS) concentration of 10,000 mg/L. When sodium pentachlorophenol (NaPCP), which has higher solubility in water, was used in the second phase of the study, at loading rates varying from 20 to 200 mg/m3·d, the removal rate of NaPCP was higher than 99% and the removal rate of COD was more than 96%. It was also found that at higher biomass concentrations, biosorption played an important role besides the biodegradation process. Batch experiments conducted in this study revealed that the sorption capacity to be 0.63 (mg PCP/g biomass) and occurred rapidly within 60 min. This phenomenon could enhance the PCP degradation through increased contact between microorganism and PCP. Further, the membrane resistance was low (trans-membrane pressure of 14 kPa) even after more than 100 ds of operation. In addition, the toxic level of PCP in the influent could have induced the microorganisms to secrete more extra-cellular polymeric substances (EPS) for their protection, which in turn must have increased the viscosity of the mixed liquor.

Study on the dyeing properties of hemicyanine dyes. I. Acrylic fabrics

Three hemicyanine dyes were employed in dyeing acrylic fabrics following traditional cationic dyeing procedures. The influence of the substituting groups of the dye molecule on the sorption rate and sorption isotherms was analyzed. The results showed that those dyed acrylic fabrics using hemicyanine dyes had obvious fluorescent effect in the spectra range 550–750 nm. In addition, according to the EN-471 standard (2003), the chromaticity of dyed acrylic fabric was calculated to evaluate whether hemicyanine dye could meet the requirements of the fluorescent dye for high visibility warning clothing.

Highly crumpled boron nitride nanosheets as adsorbents: scalable solvent-less production

Boron nitride nanosheets (BNNSs), so-called “white graphene”, have recently received increasing attention, both theoretically and experimentally. Although many synthetic procedures have been proposed for the synthesis of BNNSs, finding a simple, solvent-less, catalyst-free, and large-scale production route is still a challenge. Here, a facile, solvent-less, low cost, and high yield process is developed, in which mechanical solid-state exfoliation allows scalable production of crumple BNNSs from commercial BN powders with a high surface area. Importantly, these BNNSs show unprecedentedly high adsorption of proteins described by various adsorption isotherms and kinetics models. In addition, the saturated BNNSs exhibit excellent recyclability, and maintain a high sorption capacity even after five cycles through simply regeneration process of heating in air. This easy recyclability route further demonstrates the great potential of BNNSs for water cleaning application.

Functionalized mesoporous silica nanoparticles with redox-responsive short-chain gatekeepers for agrochemical delivery.

The controlled release of salicylic acid (SA), a key phytohormone, was mediated by using a novel decanethiol gatekeeper system grafted onto mesoporous silica nanoparticles (MSNs). The decanethiol was conjugated only to the external surfaces of the MSNs through glutathione (GSH)-cleavable disulfide linkages and the introduction of a process to assemble gatekeepers only on the outer surface so that the mesopore area can be maintained for high cargo loading. Raman and nitrogen sorption isotherm analyses confirmed the successful linkage of decanethiol to the surface of MSNs. The in vitro release of SA from decanethiol gated MSNs indicated that the release rate of SA in an environment with a certain amount of GSH was significantly higher than that without GSH. More importantly, in planta experiments showed the release of SA from decanethiol gated MSNs by GSH induced sustained expression of the plant defense gene PR-1 up to 7 days after introduction, while free SA caused an early peak in PR-1 expression which steadily decreased after 3 days. This study demonstrates the redox-responsive release of a phytohormone in vitro and also indicates the potential use of MSNs in planta as a controlled agrochemical delivery system.

Adsorption kinetics and optimum conditions for Cr(VI) removal by activated carbon prepared from luffa sponge

Activated carbon (AC) prepared from luffa sponge was firstly used as an adsorbent to remove Cr(VI) from aqueous solution. The Cr(VI) adsorption behaviors of AC under different conditions, including initial Cr(VI) concentration, quantity of AC, solution pH, and temperature were investigated. The optimal conditions for adsorption of Cr(VI) by AC were pH = 1, initial Cr(VI) concentration = 80 mg/L, T = 303 K, and AC content = 1.6 g/L. The adsorption kinetics could be described by the pseudo-second-order model. Fourier transform infrared spectroscopy was used to investigate the sorption mechanism. Some functional groups such as C–O and O–H were formed on the carbon surface, which could then react with Cr(VI). The surface structure of AC before and after adsorption was analyzed by scanning electronic microscopy. Adsorbed ions choked some of the pores in AC after adsorption. The Brunauer–Emmett–Teller surface area and average pore size of the AC were 834.13 m2/g and 5.17 nm, respectively. The maximum adsorption of Cr(VI) by AC was 149.06 mg/g, which makes AC prepared from luffa sponge promising for removing Cr(VI) from wastewater.

Multifunctional polymer/porous boron nitride nanosheet membranes for superior trapping emulsified oils and organic molecules

Effective oil/water separation and removal of organic molecules from water are of worldwide importance for water source protection. Multifunctional sorbent materials with excellent sorption capacity, stability, and recyclability properties need to be developed. Here, flexible and multifunctional polymer/porous boron nitride nanosheets (BNNSs) membranes with high water permeability, exhibiting high effectiveness and stability in the purification of simulated wastewater tainted with either oil/water emulsion or organic molecules, are reported. Remarkably, the flexible nature of these porous membranes enables simplicity of operation for water remediation processing and ease of post-processing collection. The composite membrane also displays a remarkably high permeability of 8 × 10⁴ L μm m^-2 h^-1 bar^-1, roughly three orders of magnitude higher than pure polymer, and excellent filter efficiencies for the pharmaceuticals ciprofloxacin, chlortetracycline, and carbamazepine (up to 14.2 L g^-1 of BNNSs in the composite membrane for a concentration of 10 mg L^-1 ciprofloxacin) and the dye methylene blue (up to 9.3 L g^-1 of BNNSs in the composite membrane at a concentration of 30 mg L^-1). Exhausted membranes can be readily rejuvenated by simple washing with retention of their high-performance characteristics. The results demonstrate the potential efficacy and practicality of these membranes for water cleaning.

Enhancement of the antifouling properties and filtration performance of poly(ethersulfone) ultrafiltration membranes by incorporation of nanoporous titania nanoparticles

Nanoporous titania nanoparticles (NTNs) were synthesized and used as an additive at a low concentration of 0.1-1 wt % in the fabrication of poly(ethersulfone) (PES) ultrafiltration membranes via non-solvent-induced phase separation. The structure and properties of nanoparticles were characterized using nitrogen sorption, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The NTNs have a size distribution with a particle size of mainly <100 nm and have a Brunauer, Emmett, and Teller surface area of ∼100 m2 g-1. The modified membranes were fabricated and investigated in terms of their pure water flux, solute rejection, and fouling resistance. The water permeability and molecular weight cutoffs (MWCOs) of membranes were determined under constant-pressure filtration in dead-end mode at 100 kPa. The membrane fouling resistance was characterized under constant flux operation using bovine serum albumin as a model foulant. The membranes were characterized in terms of morphology, porosity, pore size distribution, energy-dispersive X-ray spectroscopy, contact angle goniometry, surface free energy, and viscosity of the dope solution. Overall, the modified membrane showed increased wettability and reduced surface free energy and pore size. The modified UF membrane with 0.5 wt % NTN loading exhibited improved fouling resistance (fouling rate of 0.58 kPa/min compared to a rate of 0.70 kPa/min for the control membrane) with ∼80% water flux recovery. The same membrane showed an ∼20% increase in water flux, an improvement in MWCO, and a narrower pore size distribution.

Superhydrophobic and superoleophilic micro-wrinkled reduced graphene oxide as a highly portable and recyclable oil sorbent.

The potential of superhydrophobic and superoleophilic microwrinkled reduced graphene oxide (MWrGO) structures is here demonstrated for oil spill cleanup. The impact of the thickness of MWrGO films on the sorption performance of three different oils was investigated. Water contact angles across the MWrGO surfaces were found to exceed 150°, while oil could be easily absorbed by the microwrinkled structures of MWrGO within seconds after contact. Although the oil surface diffusion rate was not found to be dependent on the thickness of the graphene oxide films, the oil sorption capacity was the largest with the thinner MWrGO films due to the high surface area resulting from their fine surface texture. Furthermore, the composite films can be repeatedly used for at least 20 oil sorption-removal cycles without any notable loss in selectivity and uptake capacity. These MWrGO/elastomer composite films could be applied as a potential candidate material for future oil spill cleanup.

Bimodal magneto-luminescent dysprosium (DyIII)-potassium (KI)-oxalate framework: magnetic switchability with high anisotropic barrier and solvent sensing

We report synthesis, characterization, and properties of a multifunctional oxalate framework, {KDy(C₂O₄)₂(H₂O)₄}_n (1) (C₂O₄^2- = oxalate dianion) composed of two absolutely different metal ions in terms of their size, charge, and electronic configuration. Dehydrated framework (1′) exhibits permanent porosity and interesting solvent (H₂O, MeOH, CH₃CN, and EtOH) vapor sorption characteristics based on specific interactions with unsaturated alkali metal sites on the pore surface. Compound 1 shows solvent responsive bimodal magnetic and luminescence properties related to the DyIII center. Compound 1 exhibits reversible ferromagnetic to antiferromagnetric phase transition upon dehydration and rehydration, hitherto unknown for any lanthanide based coordination polymer or metal-organic frameworks. Both the compounds 1 and 1′ exhibit slow magnetic relaxation with very high anisotropic barrier (417 ± 9 K for 1 and 418 ± 7 K for 1′) which has been ascribed to the single ion magnetic anisotropy of the Dy^III centers. Nevertheless, compound 1 shows a metal based luminescence property in the visible region and H₂O molecules exhibit the strongest quenching effect compared to other solvents MeOH, MeCN, and EtOH, evoking 1′ as a potential H₂O sensor.