Apatite-inducing ability of titanium oxide layer on titanium surface : the effect of surface energy

In the present study, pure titanium (Ti) plates were firstly treated to form various types of oxide layers on the surface and then were immersed into simulated body fluid (SBF) to evaluate the apatite-forming ability. The surface morphology and roughness of the different oxide layers were measured by atomic force microscopy (AFM), and the surface energies were determined based on the Owens–Wendt (OW) methods. It was found that Ti samples after alkali heat (AH) treatment achieved the best apatite formation after soaking in SBF for three weeks, compared with those without treatment, thermal or H₂O₂ oxidation. Furthermore, contact angle measurement revealed that the oxide layer on the alkali heat treated Ti samples possessed the highest surface energy. The results indicate that the apatite-inducing ability of a titanium oxide layer links to its surface energy. Apatite nucleation is easier on a surface with a higher surface energy.

The effect of training in reduced energy density eating and food self-monitoring accuracy on weight loss maintenance

Background:
Failure to maintain weight losses in lifestyle change programs continues to be a major problem and warrants investigation of innovative approaches to weight control.
Objective:
The goal of this study was to compare two novel group interventions, both aimed at improving weight loss maintenance, with a control group.
Methods and Procedures:
A total of 103 women lost weight on a meal replacement–supplemented diet and were then randomized to one of three conditions for the 14-week maintenance phase: cognitive-behavioral treatment (CBT); CBT with an enhanced food monitoring accuracy (EFMA) program; or these two interventions plus a reduced energy density eating (REDE) program. Assessments were conducted periodically through an 18-month postintervention. Outcome measures included weight and self-reported dietary intake. Data were analyzed using completers only as well as baseline-carried-forward imputation.
Results:
Participants lost an average of 7.6 plusminus 2.6 kg during the weight loss phase and 1.8 plusminus 2.3 kg during the maintenance phase. Results do not suggest that the EFMA intervention was successful in improving food monitoring accuracy. The REDE group decreased the energy density (ED) of their diets more so than the other two groups. However, neither the REDE nor the EFMA condition showed any advantage in weight loss maintenance. All groups regained weight between 6- and 18-month follow-ups.
Discussion:
Although no incremental weight maintenance benefit was observed in the EFMA or EFMA + REDE groups, the improvement in the ED of the REDE group's diet, if shown to be sustainable in future studies, could have weight maintenance benefits.

Exploiting affinity propagation for energy-efficient information discovery in sensor networks

Wireless sensor networks (WSN) are attractive for information gathering in large-scale data rich environments. Emerging WSN applications require dissemination of information to interested clients within the network requiring support for differing traffic patterns. Further, in-network query processing capabilities are required for autonomic information discovery. In this paper, we formulate the information discovery problem as a load-balancing problem, with the combined aim being to maximize network lifetime and minimize query processing delay. We propose novel methods for data dissemination, information discovery and data aggregation that are designed to provide significant QoS benefits. We make use of affinity propagation to group "similar" sensors and have developed efficient mechanisms that can resolve both ALL-type and ANY-type queries in-network with improved energy-efficiency and query resolution time. Simulation results prove the proposed method(s) of information discovery offer significant QoS benefits for ALL-type and ANY-type queries in comparison to previous approaches.

Development of a building integrated photovoltaic/thermal solar energy cogeneration system

Using renewable energy sources for onsite cogeneration from structural building elements is a relatively new concept and is gaining considerable interest. In this study the design, development, manufacturing and testing of a novel building integrated photovoltaic/thermal (BIPVT) solar energy cogeneration system is discussed.

Adhesives (ADH), resistance seam welding (RSW) and autoclaving (ATC) were identified as the most appropriate for fabricating BIPVT roofing panels. Of these manufacturing methods ADH was found to be most suitable for low volume production systems due to its low capital cost.

A prototype panel, fabricated using ADH methods, exhibited good thermal performance. It was also shown that BIPVT performance could be theoretically predicted using a one dimensional heat transfer model and showed excellent agreement with experimental data. The model was used to suggest further design improvements. Finally, a transient simulation of the BIPVT was performed in TRNSYS and is used to illustrate the benefits of the system.

Energy analysis of the construction of office buildings /by Graham J. Treloar

Buildings have a significant impact on the environment due to the energy required for the manufacture of construction materials. The method of assessing the energy embodied in a product is known as energy analysis. Detailed office building embodied energy case studies are very rare. However, there is evidence to suggest that the energy requirements for the construction phase of commercial buildings, including the energy embodied in materials, is a significant component of the life cycle energy requirements. This thesis sets out to examine the current state of energy analysis, determine the national average energy intensities < i.e. embodied energy rates < for building materials and assess the significance of using national average energy intensities for the energy analysis of a case study office building. Likely ranges of variation in the building material embodied energy rates from the national averages are estimated and the resulting distribution for total embodied energy in the case study building simulated. Strategies for improving the energy analysis methods and data are suggested. Detailed energy analysis is shown to be a useful indicative method of quantifying the energy required for the construction of buildings.

Comprehensive embodied energy analysis framework

The assessment of the direct and indirect requirements for energy is known as embodied energy analysis. For buildings, the direct energy includes that used primarily on site, while the indirect energy includes primarily the energy required for the manufacture of building materials. This thesis is concerned with the completeness and reliability of embodied energy analysis methods. Previous methods tend to address either one of these issues, but not both at the same time. Industry-based methods are incomplete. National statistical methods, while comprehensive, are a ‘black box’ and are subject to errors. A new hybrid embodied energy analysis method is derived to optimise the benefits of previous methods while minimising their flaws. In industry-based studies, known as ‘process analyses’, the energy embodied in a product is traced laboriously upstream by examining the inputs to each preceding process towards raw materials. Process analyses can be significantly incomplete, due to increasing complexity. The other major embodied energy analysis method, ‘input-output analysis’, comprises the use of national statistics. While the input-output framework is comprehensive, many inherent assumptions make the results unreliable. Hybrid analysis methods involve the combination of the two major embodied energy analysis methods discussed above, either based on process analysis or input-output analysis. The intention in both hybrid analysis methods is to reduce errors associated with the two major methods on which they are based. However, the problems inherent to each of the original methods tend to remain, to some degree, in the associated hybrid versions. Process-based hybrid analyses tend to be incomplete, due to the exclusions associated with the process analysis framework. However, input-output-based hybrid analyses tend to be unreliable because the substitution of process analysis data into the input-output framework causes unwanted indirect effects. A key deficiency in previous input-output-based hybrid analysis methods is that the input-output model is a ‘black box’, since important flows of goods and services with respect to the embodied energy of a sector cannot be readily identified. A new input-output-based hybrid analysis method was therefore developed, requiring the decomposition of the input-output model into mutually exclusive components (ie, ‘direct energy paths’). A direct energy path represents a discrete energy requirement, possibly occurring one or more transactions upstream from the process under consideration. For example, the energy required directly to manufacture the steel used in the construction of a building would represent a direct energy path of one non-energy transaction in length. A direct energy path comprises a ‘product quantity’ (for example, the total tonnes of cement used) and a ‘direct energy intensity’ (for example, the energy required directly for cement manufacture, per tonne). The input-output model was decomposed into direct energy paths for the ‘residential building construction’ sector. It was shown that 592 direct energy paths were required to describe 90% of the overall total energy intensity for ‘residential building construction’. By extracting direct energy paths using yet smaller threshold values, they were shown to be mutually exclusive. Consequently, the modification of direct energy paths using process analysis data does not cause unwanted indirect effects. A non-standard individual residential building was then selected to demonstrate the benefits of the new input-output-based hybrid analysis method in cases where the products of a sector may not be similar. Particular direct energy paths were modified with case specific process analysis data. Product quantities and direct energy intensities were derived and used to modify some of the direct energy paths. The intention of this demonstration was to determine whether 90% of the total embodied energy calculated for the building could comprise the process analysis data normally collected for the building. However, it was found that only 51% of the total comprised normally collected process analysis. The integration of process analysis data with 90% of the direct energy paths by value was unsuccessful because: • typically only one of the direct energy path components was modified using process analysis data (ie, either the product quantity or the direct energy intensity); • of the complexity of the paths derived for ‘residential building construction’; and • of the lack of reliable and consistent process analysis data from industry, for both product quantities and direct energy intensities. While the input-output model used was the best available for Australia, many errors were likely to be carried through to the direct energy paths for ‘residential building construction’. Consequently, both the value and relative importance of the direct energy paths for ‘residential building construction’ were generally found to be a poor model for the demonstration building. This was expected. Nevertheless, in the absence of better data from industry, the input-output data is likely to remain the most appropriate for completing the framework of embodied energy analyses of many types of products—even in non-standard cases. ‘Residential building construction’ was one of the 22 most complex Australian economic sectors (ie, comprising those requiring between 592 and 3215 direct energy paths to describe 90% of their total energy intensities). Consequently, for the other 87 non-energy sectors of the Australian economy, the input-output-based hybrid analysis method is likely to produce more reliable results than those calculated for the demonstration building using the direct energy paths for ‘residential building construction’. For more complex sectors than ‘residential building construction’, the new input-output-based hybrid analysis method derived here allows available process analysis data to be integrated with the input-output data in a comprehensive framework. The proportion of the result comprising the more reliable process analysis data can be calculated and used as a measure of the reliability of the result for that product or part of the product being analysed (for example, a building material or component). To ensure that future applications of the new input-output-based hybrid analysis method produce reliable results, new sources of process analysis data are required, including for such processes as services (for example, ‘banking’) and processes involving the transformation of basic materials into complex products (for example, steel and copper into an electric motor). However, even considering the limitations of the demonstration described above, the new input-output-based hybrid analysis method developed achieved the aim of the thesis: to develop a new embodied energy analysis method that allows reliable process analysis data to be integrated into the comprehensive, yet unreliable, input-output framework. Plain language summary Embodied energy analysis comprises the assessment of the direct and indirect energy requirements associated with a process. For example, the construction of a building requires the manufacture of steel structural members, and thus indirectly requires the energy used directly and indirectly in their manufacture. Embodied energy is an important measure of ecological sustainability because energy is used in virtually every human activity and many of these activities are interrelated. This thesis is concerned with the relationship between the completeness of embodied energy analysis methods and their reliability. However, previous industry-based methods, while reliable, are incomplete. Previous national statistical methods, while comprehensive, are a ‘black box’ subject to errors. A new method is derived, involving the decomposition of the comprehensive national statistical model into components that can be modified discretely using the more reliable industry data, and is demonstrated for an individual building. The demonstration failed to integrate enough industry data into the national statistical model, due to the unexpected complexity of the national statistical data and the lack of available industry data regarding energy and non-energy product requirements. These unique findings highlight the flaws in previous methods. Reliable process analysis and input-output data are required, particularly for those processes that were unable to be examined in the demonstration of the new embodied energy analysis method. This includes the energy requirements of services sectors, such as banking, and processes involving the transformation of basic materials into complex products, such as refrigerators. The application of the new method to less complex products, such as individual building materials or components, is likely to be more successful than to the residential building demonstration.

A study on look-ahead control and energy management strategies in hybrid electric vehicles

Fuel efficiency in a hybrid electric vehicle requires a fine balance between usage of combustion engine and battery power. Information about the geometry of the road and traffic ahead can have a great impact on optimized control and the power split between the main parts of a hybrid electric vehicle. This paper provides a survey on the existing methods of control and energy management emphasizing on those that consider the look-ahead road situation and trajectory information. Then it presents the future trends in the control and energy management of hybrid electric vehicles.

Relationship between indices of adiposity obtained by peripheral quantitative computed tomography and dual-energy X-ray absorptiometry in pre-pubertal children

Background/Aim: The study investigated the relationship between indices of adiposity measured by peripheral quantitative computed tomography (pQCT) and dual-energy X-ray absorptiometry (DXA) in pre-pubertal children.

Subjects and methods: DXA-derived per cent body fat (%BF) was measured in 284 boys and 288 girls, aged 7–10 years. Cross-sections of the forearm (n=427) and lower leg (n=560) were obtained by pQCT to measure total cross-sectional area of the limb (Total CSA), Muscle CSA, Fat CSA, %Fat CSA (Fat CSA/Total CSA×100) and muscle density.

Results: Peripheral QCT-derived %Fat CSA in the forearm and lower leg correlated strongly with DXA-derived %BF (r=0.83–0.89, p<0.01) in both boys and girls. However, forearm and lower leg %Fat CSA were higher than whole body %BF by 5% and 10%, respectively. A better prediction of whole-body %BF was achieved by including %Fat CSA, muscle density and height into a hierarchical regression model. Using sex-specific regression equations, 87.7% of the boys and 83.7% of the girls had a predicted %BF within 3% units of the %BF obtained by DXA.

Conclusion: In pre-pubertal children, pQCT measures of adiposity are strongly associated with whole-body per cent body fat. This reproducible method could be an alternative technique to estimate body composition in this population.

Evidence-based development of school-based and family-involved prevention of overweight across Europe : the ENERGY-project's design and conceptual framework

Background
There is an urgent need for more carefully developed public health measures in order to curb the obesity epidemic among youth. The overall aim of the "EuropeaN Energy balance Research to prevent excessive weight Gain among Youth" (ENERGY)-project is the development and formative evaluation of a theory-informed and evidence-based multi-component school-based and family-involved intervention program ready to be implemented and evaluated for effectiveness across Europe. This program aims at promoting the adoption or continuation of health behaviors that contribute to a healthy energy balance among school-aged children. Earlier studies have indicated that school and family environments are key determinants of energy-balance behaviors in schoolchildren. Schools are an important setting for health promotion in this age group, but school-based interventions mostly fail to target and involve the family environment.

Methods
Led by a multidisciplinary team of researchers from eleven European countries and supported by a team of Australian experts, the ENERGY-project is informed by the Environmental Research Framework for Weight gain Prevention, and comprises a comprehensive epidemiological analysis including 1) systematic reviews of the literature, 2) secondary analyses of existing data, 3) focus group research, and 4) a cross European school-based survey.

Results and discussion
The theoretical framework and the epidemiological analysis will subsequently inform stepwise intervention development targeting the most relevant energy balance-related behaviors and their personal, family-environmental and school-environmental determinants applying the Intervention Mapping protocol. The intervention scheme will undergo formative and pilot evaluation in five countries. The results of ENERGY will be disseminated among key stakeholders including researchers, policy makers and the general population.

Conclusions
The ENERGY-project is an international, multidisciplinary effort to develop and test an evidence-based and theory-informed intervention program for obesity prevention among school-aged children.

Increased energy intake entirely accounts for increase in body weight in women but not in men in the UK between 1986 and 2000

There is debate over the casual factors for the rise in body weight in the UK. The present study investigates whether increases between 1986 and 2000 for men and women were a result of increases in mean total energy intake, decreases in mean physical activity levels or both. Estimates of mean total energy intake in 1986 and 2000 were derived from food availability data adjusted for wastage. Estimates of mean body weight for adults aged 19–64 years were derived from nationally representative dietary surveys conducted in 1986–7 and 2000–1. Predicted body weight in 1986 and 2000 was calculated using an equation relating body weight to total energy intake and sex. Differences in predicted mean body weight and actual mean body weight between the two time points were compared. Monte Carlo simulation methods were used to assess the stability of the estimates. The predicted increase in mean body weight due to changes in total energy intake between 1986 and 2000 was 4·7 (95 % credible interval 4·2, 5·3) kg for men and 6·4 (95 % credible interval 5·9, 7·1) kg for women. Actual mean body weight increased by 7·7 kg for men and 5·4 kg for women between the two time points. We conclude that increases in mean total energy intake are sufficient to explain the increase in mean body weight for women between 1986 and 2000, but for men, the increase in mean body weight is likely to be due to a combination of increased total energy intake and reduced physical activity levels.

Bipolar disorder and adiposity : a study using whole body dual energy X-ray absorptiometry scans

Objective: Previous research has demonstrated a relationship between adiposity and bipolar disorder, although data are derived predominantly from patient samples and use indirect methods of assessing adiposity. This study investigated the association between bipolar disorder and several indices of adiposity, including body fat mass as measured by dual energy X-ray absorptiometry (DXA), in a community-based sample.

Methods: In this study, 21 women with bipolar disorder and 523 healthy controls were drawn from an age-stratified, random, community-based sample of women (20–93 years) participating in the Geelong Osteoporosis Study. Bipolar disorder was diagnosed utilising a semi-structured clinical interview. Anthropometric measurements (weight, height, waist and hip circumference) were taken and fat mass was determined from whole body DXA scans (Lunar DPX-L).

Results: Those with bipolar disorder tended to have greater adiposity. Age-adjusted mean (95% CI) values for bipolar versus controls according to adiposity indices were weight 75.6 (68.9–82.3) versus 72.6 (71.3–74.0) kg, waist circumference 89.8 (84.1–95.6) versus 87.3 (86.1–88.5) cm, waist:hip ratio 0.85 (0.82–0.87) versus 0.84 (0.83–0.84), body mass index 27.6 (25.1–30.1) versus 27.5 (27.0–28.0) kg/m2, fat mass 31.4 (26.5–36.3) versus 28.6 (27.5–29.5) kg and %body fat 40.4 (36.9–43.9) versus 38.0 (37.3–38.7)%; all p > 0.05. Further adjustment for height, smoking, alcohol, psychotropic medication, energy intake or physical activity did not influence these patterns.

Conclusion: Although a pattern suggestive of greater adiposity among those with bipolar disorder was observed, no significant differences were detected. We cannot exclude the possibility of a type II error. Further research with a larger sample may produce more conclusive results.

Electrowetting measurements with mercury showing mercury/mica interfacial energy depends on charging

We demonstrate that the interfacial energy between mercury and mica is a function of charge on the mercury surface, decreasing with increasing positive charge. The contact angle of mercury on mica has been measured as a function of potential applied to the mercury, which forms the working electrode of a cell containing either KC1 or NaF electrolyte solution. At high negative applied potentials, a stable aqueous film exists between the mercury and mica surface. As potential is made less negative, the film collapses and mercury partial1 wets the mica at a critical potential, close to the electrocapillary maximum. Upon increasing the potential further (making the Hg surface more and more positive), the contact angle measured within the mercury continually decreases. Electrowetting with mercury is not unexpected since its interfacial tension with the aqueous phase is known to be a function of applied potential. However, the observed decrease goes against the trend expected from the Young equation if only this effect is considered. To explain the data we must allow the mercury/mica interfacial tension also to vary with applied potential. This variation indicates that the mercury surface is positively charged by contact with mica, consistent with known contact electrification between these two materials. The inherent charges at the mercury interfaces with mica and electrolyte solution result in contact angle changes of some tens of degrees with a change in applied potential of half a volt orders of magnitude less than the potentials required to effect comparable changes in other electrowetting systems.

Adaptive cruise control look-ahead system for energy management of vehicles

Cruise control in motor vehicles enhances safe and efficient driving by maintaining a constant speed at a preset level. Adaptive Cruise Control (ACC) is the latest development in cruise control. It controls engine throttle position and braking to maintain a safe distance behind a vehicle in front by responding to the speed of this vehicle, thus providing a safer and more relaxing driving environment. ACC can be further developed by including the look-ahead method of predicting environmental factors such as wind speed and road slope. The conventional analytical control methods for adaptive cruise control can generate good results; however they are difficult to design and computationally expensive. In order to achieve a robust, less computationally expensive, and at the same time more natural human-like speed control, intelligent control techniques can be used. This paper presents an Adaptive Neuro-Fuzzy Inference System (ANFIS) based on ACC systems that reduces the energy consumption of the vehicle and improves its efficiency. The Adaptive Cruise Control Look-Ahead (ACC-LA) system works as follows: It calculates the energy consumption of the vehicle under combined dynamic loads like wind drag, slope, kinetic energy and rolling friction using road data, and it includes a look-ahead strategy to predict the future road slope. The cruise control system adaptively controls the vehicle speed based on the preset speed and the predicted future slope information. By using the ANFIS method, the ACC-LA is made adaptive under different road conditions (slope angle and wind direction and speed). The vehicle was tested using the adaptive cruise control look-ahead energy management system, the results compared with the vehicle running the same test but without the adaptive cruise control look-ahead energy management system. The evaluation outcome indicates that the vehicle speed was efficiently controlled through the look-ahead methodology based upon the driving cycle, and that the average fuel consumption was reduced by 3%.

Face recognition via the overlapping energy histogram

In this paper we investigate the face recognition problem via the overlapping energy histogram of the DCT coefficients. Particularly, we investigate some important issues relating to the recognition performance, such as the issue of selecting threshold and the number of bins. These selection methods utilise information obtained from the training dataset. Experimentation is conducted on the Yale face database and results indicate that the proposed parameter selection methods perform well in selecting the threshold and number of bins. Furthermore, we show that the proposed overlapping energy histogram approach outperforms the Eigenfaces, 2DPCA and energy histogram significantly.

Energy deficiency, menstrual disturbances, and low bone mass : what do exercising Australian women know about the female athlete triad?

Purpose: Prevention of the female athlete triad is essential to protect female athletes’ health. The aim of this study was to investigate the knowledge, attitudes, and behaviors of regularly exercising adult women in Australia toward eating patterns, menstrual cycles, and bone health.
Methods: A total of 191 female exercisers, age 18–40 yr, engaging in ≥2 hr/wk of strenuous activity, completed a survey. After 11 surveys were excluded (due to incomplete answers), the 180 participants were categorized into lean-build sports (n = 82; running/ athletics, triathlon, swimming, cycling, dancing, rowing), non-lean-build sports (n = 94; basketball, netball, soccer, hockey, volleyball, tennis, trampoline, squash, Australian football), or gym/fitness activities (n = 4).
Results: Mean (± SD) training volume was 9.0 ± 5.5 hr/wk, with participants competing from local up to international level. Only 10% of respondents could name the 3 components of the female athlete triad. Regardless of reported history of stress fracture, 45% of the respondents did not think that amenorrhea (absence of menses for ≥3 months) could affect bone health, and 22% of those involved in lean-build sports would do nothing if experiencing amenorrhea (vs. 3.2% in non-lean-build sports, p = .005). Lean-build sports, history of amenorrhea, and history of stress fracture were all significantly associated with not taking action in the presence of amenorrhea (all p < .005). Conclusions: Few active Australian women are aware of the detrimental effects of menstrual dysfunction on bone health. Education programs are needed to prevent the female athlete triad and ensure that appropriate actions are taken by athletes when experiencing amenorrhea.