A review of stock enhancement practices in the inland water fisheries of Asia

Inland fisheries contribute only about ten percent to global fish production. Asia is the leading producer of inland fish, accounting for over 80 percent of the total production. Until recently, the inland fisheries sector had taken back stage in fisheries development plans, particularly so, given the emphasis being placed on aquaculture development throughout the world, including Asia. This report evaluates the inland fishery practices in a number of Asian countries according to habitat type, role in overall foodfish supplies and development trends. Special emphasis is laid on stock enhancement in inland fisheries in Asia, and only those fisheries in which some form of stock enhancement is practised are considered in this report.

In Asia, inland fisheries are mostly rural, artisanal activities catering to rural populations and providing an affordable source of animal protein, employment and household income. Stock enhancement is an integral component of many inland fisheries. With recent developments in
artificial propagation techniques for fast-growing and desirable fish species and the consequent increased availability of seed stock, such activities are beginning to affect inland fishery production in most Asian countries. Indeed, new avenues of production such as culture-based fisheries are increasingly adopted and seen as a way forward in most countries. Inland fishery activities also have a distinct advantage in that their development is usually less resource intensive than is aquaculture.

The economic viability of stock enhancement of large lacustrine waterbodies and rivers has not been demonstrated in any of the Asian countries, the fisheries of such waterbodies being dependent on naturally recruited stocks. The most successful stock enhancements in Asia are in floodplain beels and oxbow lakes in Bangladesh where the use of small waterbodies that are not capable of supporting natural fisheries has led to culture-based fisheries having stock and recapture rates that are very high. Culture-based fisheries are not resource intensive and are community-based activities. However, their success requires major institutional changes, and these are affected by national and local governments. In general, they can be considered to have the greatest potential for further development.

A major concern related to stock enhancements in inland waters is their possible effects on biodiversity. This is for two reasons: firstly, most countries depend wholly or partially on exotic species for stock enhancement and secondly, freshwater fishes are known to be among the most threatened of vertebrates. Major studies should be undertaken to evaluate the current situation so that remedial steps can be taken, if needed, without causing serious harm to some of the stock enhancement practices that are gaining momentum.

A greener house : the sustainable property investor's guide to buying, building and renovating

Sustainability is now an integral part of society and the built environment. Unfortunately many home owners and home-buyers are unaware of the relationship between sustainability and value, especially with regard to the potential added value to their home. Payback periods can be different depending on factors such as the initial capital outlay and the levels of depreciation and obsolescence, as well as savings made (if any) to the running costs of the home

Is the social agenda driving sustainable property development in Melbourne, Australia?

Purpose – Sustainable property development has increased in market share over the past two to three years globally and locally. This research aims to analyze the drivers and barriers to sustainable property development in Melbourne using the triple bottom line (TBL) theoretical framework. The TBL posits that sustainability has social, economic and environmental aspects to fulfil.

Design/methodology/approach – A questionnaire was sent out to 190 developers in Melbourne who promoted sustainable property development to ascertain their views about the drivers and barriers.

Findings – This research indicates that in the 2007 Melbourne market the drivers were social rather than economic. The data reveal that social reasons are considered more than economic arguments for incorporating sustainability into developments. The business case, or the economic drivers for sustainability alone do not convince developers.

Research limitations/implications – The questionnaire survey informed us about developers' views but not why they have these views. The sample was limited to Melbourne.

Practical implications – More developments are required for developers to become convinced of the benefits. The relatively low price of energy undermines the business case for sustainability in property here and needs to be fully costed.

Originality/value – This paper illustrates that whilst the theoretical framework cites three key areas for sustainability, the reality is that developers are currently driven by social and environmental factors primarily and the business case is not accepted by the majority of developers.

Evaluating the triple bottom line in the implementation of photovoltaic systems in UK social housing

The Intergovernmental Panel on Climate Change warnings regarding the detrimental effects of carbon dioxide emissions and global warming have gained acceptance amongst many governments (IPCC 2001). The UK government has agreed to reduce emissions, implement a package of enabling measures (UKCCP 2000) and issued an Energy White Paper (HMSO 2003) calling for a diversification of energy supply policies which will include renewable sources.

Housing accounts for approximately 25% of UK CO2 emissions and as providers of social housing, Registered Social Landlords (RSLs) and their tenants are major contributors. RSLs are deliverers of national policy in several areas and contribute to the attainment of governmental environmental, social and economic targets and impact upon the wider demands of housing policy, healthcare, education and law & order (DETR 1999, Cole and Shayer 1998).

Photovoltaic (PV) electricity generation could deliver “free” electricity to the low income households historically housed by RSLs. PV helps address such issues as fuel poverty and could be used as a stimulus for creating interest in areas of low demand for social housing.

RSLs provide housing solutions which cross traditional economic, social and environmental divides and this lends their modus operandi to the concept of the triple bottom line. The triple bottom line enables social and environmental aspects to be considered alongside economic considerations within decision-making frameworks (Elkington 1999, Andreason 1995).

Using a qualitative research methodology, this paper assesses current commercial viability of PV installations on RSL developments and identifies key barriers to implementation. The paper also investigates whether the application of the triple bottom line can liberate RSLs from viewing PV as a non-viable option by enabling a greater emphasis to be placed on the social & environmental aspects of PV. The paper considers whether a framework for RSLs to improve their decision-making processes by embracing social & environmental factors is feasible.

Modified life cycle inventory of aluminium die casting

Aluminium die casting is a process used to transform molten aluminium material into automotive gearbox housings, wheels and electronic components, among many other uses. It is used because it is a very efficient method of achieving near net shape with the required mechanical properties. Life Cycle Assessment (LCA) is a technique used to determine the environmental impacts of a product or process. The Life Cycle Inventory (LCI) is the initial phase of an LCA and describes which emissions will occur and which raw materials are used during the life of a product or during a process. This study has improved the LCI technique by adding in manufacturing and other costs to the ISO standardised methods. Although this is not new, the novel application and allocation methods have been developed independently. The improved technique has then been applied to Aluminium High Pressure Die Casting. In applying the improved LCI to this process, the cost in monetary terms and environmental emissions have been determined for a particular component manufactured by this process. A model has been developed in association with an industry partner so this technique can be repeatedly applied and used in the prediction of costs and emissions. This has been tested with two different products. Following this, specialised LCA software modelling of the aluminium high pressure die casting process was conducted. The variations in the process have shown that each particular component will have different costs and emissions and it is not possible to generalise the process by modelling only one component. This study has concentrated on one process within die casting but the techniques developed can be used across any variations in the die casting process.

Heavy metal accumulation in soils at three field sites subject to effluent irrigation

Three field sites were chosen to study the environmental assimilative capacity of heavy metals in soil. These sites were the Werribee Farm and the Myome Farm in Australia and Shenyang Zhangshi Irrigation Area in China. The Werribee Farm and the Shenyang Zhangshi Irrigation Area received sewage treatment and application on land for a long time. The Myome farm is an experimental site in which investigations on land application of municipal wastewater on water repellent soils is currently being trailed. Heavy metal contamination, in particular Cr, Cu and Zn, in the Land Filtration soil of Werribee Farm was widespread. More than a century of sewage irrigation has occurred in the Werribee Farm. The temporal distribution pattern of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the soil at this site follow an exponential trend with time and the spatial distribution pattern of accumulation of heavy metals in different paddocks correlates with the number of years of sewage irrigation at that site in the Farm. Extensive sewage irrigation at Shenyang Zhangshi Irrigation Area resulted in significant Cd pollution in soil-plant (rice) system and poses a significant threat to the health of local people. Even after eight years since cessation of sewage irrigation, the bioavailable fractions of Cd in the soil as analyzed by sequential extraction techniques were very high thus illustrating long-term persistence. The simultaneous competitive adsorption of metals in water repellent soils (at Myome Farm in South Australia) was studied. In the competitive situation, Cr, Pb and Cu are the heavy metal cations more strongly adsorbed by the soil, whereas Cd, Ni and Zn are the least adsorbed. The increase in Freundlich adsorption capacity by clay amendment suggested that clayed soils are capable sorption of higher heavy metal loadings compared to the non-clayed water repellent soil, which is more vulnerable to heavy metal inputs. A simple model of environmental assimilative capacity is proposed. The results of comparison of the three field sites shows that the Werribee Farm has a higher environmental assimilative capacity of heavy metals in soil than the soils at Shenyang Zhangshi Irrigation Area and Myome Farm, however heavy metal contamination at Werribee Farm is still a concern. The model of environmental assimilative capacity of heavy metals in soil is an effective tool to assist management of effluent applied land irrigation systems and can be used to better design environmental engineering systems.

Using input-output data in life cycle inventory analysis

The impacts on the environment from human activities are of increasing concern. The need to consider the reduction in energy consumption is of particular interest, especially in the construction and operation of buildings, which accounts for between 30 and 40% of Australia's national energy consumption. Much past and more recent emphasis has been placed on methods for reducing the energy consumed in the operation of buildings. With the energy embodied in these buildings having been shown to account for an equally large proportion of a building's life cycle energy consumption, there is a need to look at ways of reducing the embodied energy of buildings and related products. Life cycle assessment (LCA) is considered to be the most appropriate tool for assessing the life cycle energy consumption of buildings and their products. The life cycle inventory analysis (LCIA) step of a LCA, where an inventory of material and energy inputs is gathered, may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and LCIA methods. These traditional methods of LCIA include process-based and input-output-based LCIA. Process-based LCIA uses process specific data, whilst input-output-based LCIA uses data produced from an analysis of the flow of goods and services between sectors of the Australian economy, also known as input-output data. With the incompleteness and unreliability of these two respective methods in mind, hybrid LCIA methods have been developed to minimise the errors associated with traditional LCIA methods, combining both process and input-output data. Hybrid LCIA methods based on process data have shown to be incomplete. Hybrid LCIA methods based on input-output data involve substituting available process data into the input-output model minimising the errors associated with process-based hybrid LCIA methods. However, until now, this LCIA method had not been tested for its level of completeness and reliability. The aim of this study was to assess the reliability and completeness of hybrid life cycle inventory analysis, as applied to the Australian construction industry. A range of case studies were selected in order to apply the input-output-based hybrid LCIA method and evaluate the subsequent results as obtained from each case study. These case studies included buildings: two commercial office buildings, two residential buildings, a recreational building; and building related products: a solar hot water system, a building integrated photovoltaic system and a washing machine. The range of building types and products selected assisted in testing the input-output-based hybrid LCIA method for its applicability across a wide range of product types. The input-output-based hybrid LCIA method was applied to each of the selected case studies in order to obtain their respective embodied energy results. These results were then evaluated with the use of a number of evaluation methods. These evaluation methods included an analysis of the difference between the process-based and input-output-based hybrid LCIA results as an evaluation of the completeness of the process-based LCIA method. The second method of evaluation used was a comparison between equivalent process and input-output values used in the input-output-based hybrid LCIA method as a measure of reliability. It was found that the results from a typical process-based LCIA and process-based hybrid LCIA have a large gap when compared to input-output-based hybrid LCIA results (up to 80%). This gap has shown that the currently available quantity of process data in Australia is insufficient. The comparison between equivalent process-based and input-output-based LCIA values showed that the input-output data does not provide a reliable representation of the equivalent process values, for material energy intensities, material inputs and whole products. Therefore, the use of input-output data to account for inadequate or missing process data is not reliable. However, as there is currently no other method for filling the gaps in traditional process-based LCIA, and as input-output data is considered to be more complete than process data, and the errors may be somewhat lower, using input-output data to fill the gaps in traditional process-based LCIA appears to be better than not using any data at all. The input-output-based hybrid LCIA method evaluated in this study has shown to be the most sophisticated and complete currently available LCIA method for assessing the environmental impacts associated with buildings and building related products. This finding is significant as the construction and operation of buildings accounts for a large proportion of national energy consumption. The use of the input-output-based hybrid LCIA method for products other than those related to the Australian construction industry may be appropriate, especially if the material inputs of the product being assessed are similar to those typically used in the construction industry. The input-output-based hybrid LCIA method has been used to correct some of the errors and limitations associated with previous LCIA methods, without the introduction of any new errors. Improvements in current input-output models are also needed, particularly to account for the inclusion of capital equipment inputs (i.e. the energy required to manufacture the machinery and other equipment used in the production of building materials, products etc.). Although further improvements in the quantity of currently available process data are also needed, this study has shown that with the current available embodied energy data for LCIA, the input-output-based hybrid LCIA appears to provide the most reliable and complete method for use in assessing the environmental impacts of the Australian construction industry.

Corporate sustainability : greenwash or a path to sustainable capitalism?

The problems of unsustainable development and the increased-awareness of corporate power in the global era have contributed to an agenda of corporate citizenship. This thesis explores the meanings and practices that fall under the banner of the triple bottom line of corporate citizenship through forty-two in-depth interviews with representatives from the corporate sector and NGO sector (including trade unions) in Australia. This purposive sample includes a specific range of corporate industries and NGO types, all of which have involvement with various areas of sustainability. Interviewees described their feelings and experiences in relation to the concept of the triple bottom line, the potential and limitations of this type of sustainability and the purpose and impacts of partnerships between NGOs and the corporate sector. On the basis of this research, this thesis argues that corporate citizenship is at best, a set of initiatives for making minor adjustments to the way companies perform their day-to-day operations and at worst, a program for improving corporate image rather than performance and for shifting the agenda of sustainable development toward corporate interests. While radical steps are required to achieve a sustainable society and environment, the terms of corporate citizenship offer very limited opportunities for change. The self-regulatory and market based model of citizenship does not challenge the impact of consumerism or the legitimacy of particular industry types and their products, except where threats are perceived to the longevity of the companies involved. Furthermore, while the exploitation of the environment and society has occurred as a result of corporate self-interest, corporate citizenship is justified on the same basis. The self-interest rationale and the tyranny of the economic bottom line in particular, substantially limit the fields of responsibility that can be included in the citizenship paradigm. While there are undoubtedly some well-intentioned corporate representatives who are working toward attaining a more sustainable corporate culture, the discourse is primarily used to shift the sustainable development agenda toward corporate paradigms and interests.

Nutrient contribution to hyper-eutrophic wetlands in Perth, Western Australia

This thesis investigates nutrient contribution to six hyper-eutrophic lakes located within close proximity of each other on the Swan Coastal Plain and 20 kilometres south of the Perth Central Business District, Western Australia. The lakes are located within a mixed land use setting and are under the management of a number of state and local government departments and organisations. These are a number of other lakes on the Swan Coastal Plain for which the majority are less than 3 metres in depth and considered as an expression of the groundwater as their base is below the regional groundwater table throughout most of the year. The limited amount of water quality data available for these six lakes and the surface water and groundwater flowing into them has restricted a thorough understanding of the processes influencing the water quality of the lakes. Various private and public companies and organisations have undertaken studies on some of the individual wetlands and there is a wide difference in scientific opinion as to the major source of the nutrients to those wetlands. These previous studies failed to consider regional surface water and groundwater effects on the nutrient fluxes and they predominantly only investigated single wetland systems. This study attempts for the first time to investigate the regional contribution of nutrients to this system of wetlands existing on the Swan Coastal plain. As such, it also includes new research on the nutrient contribution to some of the remaining wetlands. The research findings indicate that the lake sediments represent a considerable store of nutrients (nitrogen and phosphorus). These sediments in turn control the nutrient status of the lake's water column. Surface water is found to contribute on an event-basis load of nutrients to the lakes whilst the groundwater surprisingly appears to contribute a comparatively low input of nutrients but governs the water depth. Analysis of the regional groundwater shows efficient denitrifying abilities as a result of denitrifying bacteria and the transport is localised. Management recommendations for the remediation of the social and environmental value of the lakes include treatment of the lake’s sediments via chemical bonding or atmospheric oxidation; utilising the regional groundwater’s denitrifying abilities to ‘treat’ the surface water via infiltration basins; and investigating the merits of managed or artificial aquifer recharge (MAR).