The influence of polymerization time and dopant concentration on the absorption of microwave radiation in conducting polypyrrole coated textiles

Temperature changes in conducting polypyrrole/para-toluene-2-sulphonic acid (PPy/pTSA) coated nylon textiles due to microwave absorption in the 8–9 GHz and 15–16 GHz frequency ranges were obtained by a thermography station during simultaneous irradiation of the samples. The temperature values are compared and related to the amounts of reflection, transmission and absorption obtained with a non-contact free space transmission technique, indicating a relationship between microwave absorption and temperature increase. Non-conductive samples showed no temperature increase upon irradiation irrespective of frequency range. The maximum temperature difference of around 4 °C in the conducting fabrics relative to ambient temperature was observed in samples having 48% absorption and 26.5 ± 4% reflection. Samples polymerized for 60 or 120 min with a dopant concentration of 0.018 mol/l or polymerized for 180 min with a dopant concentration of 0.009 mol/l yielded optimum absorption levels. As the surface resistivity decreased and the reflection levels increased, the temperature increase upon irradiation reduced.

Absorption and desorption characteristics of fluoride in the calcareous and siliceous sand sheet aquifers of south-west Victoria, Australia

This study assessed the sustainability of utilising groundwater systems to
manage an aluminium smelter's fluoridated trade wastewater stream. Replacing ocean discharge of the wastewater with land irrigation is one option. Using a groundwater model (developed using MODFLOW incorporating parameter estimation software (PEST-ASP)), we found that most of the groundwater flow takes place through surface sands. Fluoride is adsorbed in these sands during the drier summer months, but desorption is rapid when winter rain flushes the aquifer. Underlying clays and other layers prevent significant contamination of the deeper aquifer.

Examination of the role of intestinal Fatty acid-binding protein in drug absorption using a parallel artificial membrane permeability assay

Transcellular diffusion across the absorptive epithelial cells (enterocytes) of the small intestine is the main route of absorption for most orally administered drugs. The process by which lipophilic compounds transverse the aqueous environment of the cytoplasm, however, remains poorly defined. In the present study, we have identified a structurally diverse group of lipophilic drugs that display low micromolar binding affinities for a cytosolic lipid-binding protein—intestinal fatty acid-binding protein (I-FABP). Binding to I-FABP significantly enhanced the transport of lipophilic drug molecules across a model membrane, and the degree of transport enhancement was related to both drug lipophilicity and I-FABP binding affinity. These data suggest that intracellular lipid-binding proteins such as I-FABP may enhance the membrane transport of lipophilic xenobiotics and facilitate drug access to the enterocyte cytoplasm and cytoplasmic organelles.

The role of absorption in women's sexual response to erotica : a cognitive-affective investigation

This study examined the effect of absorption on women's emotional and cognitive processing of erotic film. Absorption was experimentally manipulated using 2 different sets of test session instructions. The first, participant-oriented, instruction set directed participants to absorb themselves in the erotic film presentation, imagining that they were active participants in the sexual activities depicted. The second, spectator-oriented, instruction set directed participants to observe and assess the erotic film excerpt as impartial spectators. The participant-oriented instruction set was found to elicit greater subjective absorption in women than the spectator-oriented instruction set, and women reported greater subjective sexual arousal in the former set compared with the latter. Thus, it appears that the degree to which a woman becomes absorbed in an erotic stimulus may affect her subsequent subjective sexual arousal. Also, women reported greater degrees of positive affect when they took a participant-oriented perspective than when they viewed the erotic materials as impartial spectators. Thus, participants who were highly absorbed in the erotic film excerpt were more likely to view the stimulus favorably. By contrast, the degree to which women became absorbed in the stimulus had no effect on their reported negative affect. Future directions for examining female response patterns are suggested.

Women's cognitive and emotional processing during sexual arousal : the effects of erotic film and absorption

Sexual arousal is a complex and dynamic element of women’s sexuality. Accounts vary, however most multidimensional models highlight the cognitive, affective and physiological components of the female sexual arousal response. While literature examining the peripheral physiological changes that occur during female sexual arousal abounds, there has been a dearth of literature pertaining to the cognitive and affective components. Thus, while many authors have included cognitive and emotions as independent components of the female sexual arousal response, there has been little empirical research to validate this approach. The aim of the current thesis was to examine the cognitive and affective components of female sexual arousal in more depth, investigating the nature of the relationship between these components under various experimental conditions. In order to do so, two integrated studies were conducted, each highlighting the effects of either external or internal variables on women’s subjective sexual arousal, absorption, positive affect and negative affect. Study One was designed to evaluate women’s emotional and cognitive processing of two elements of erotic film – foreplay and erotic context. 60 women were asked to report their subjective sexual arousal, absorption, positive affect and negative affect in response to one of four erotic film excerpts. The erotic excerpts varied in accordance with the degree of foreplay (low vs. high) depicted and the context in which the sexual activities took place (novel vs. habitual context). Women in the study responded more favourably to the high foreplay erotic film excerpt, subsequently reporting higher degrees of subjective sexual arousal, absorption and positive affect. Women also responded favourably to the erotic excerpt filmed in a novel context, reporting greater subjective sexual arousal as a result. The environment in which the sexual encounters were filmed failed to have an effect however, on women’s absorption or their positive or negative affect. The results of Study One suggest that stimulus specific variables, such as the degree of foreplay depicted, have a significant influence on female cognitive and emotional processing of erotic film. The results also suggest that a relationship exists between absorption, subjective sexual arousal and positive affect, albeit a correlational one. Specifically, there was evidence of parallel processing during sexual arousal, as participant reported sexual arousal, absorption and positive affect all increased and decreased in unison. Based on the results it was suggested that future research attempt to experimentally manipulate one of these variables, to examine its direct effect on the remaining variable. Thus, Study Two aimed to examine the effects of absorption on women’s cognitive and emotional processing of erotica. Study Two manipulated absorption at two levels (high vs. low), examining the impact of these states on participants’ subsequent absorption, subjective sexual arousal and positive and negative affect. 62 women were asked to read one of two sets of test session instructions. The first, participant-oriented instruction set, instructed participants to immerse themselves in the erotic film excerpt, as if they were active participants in the sexual exchange. The second, spectator-oriented instruction set, directed participants to observe and evaluate the erotic film. These instructions were designed to elicit high and low degrees of absorption, respectively. The utility of this approach when manipulating female absorption, was demonstrated by self reported ratings of absorption, given at the conclusion of the film presentation. Participants were also asked to report their subjective sexual arousal and positive and negative affect at the conclusion of the erotic film presentation. The findings of this study suggest that the adoption of a participant-oriented (high absorption) perspective elicits more favourable responses from participants than a spectator-oriented (low absorption) perspective, with participants in the former experimental group reporting greater degrees of subjective sexual arousal and positive affect. Negative affect was equivalent across experimental conditions, with the participants reporting that they experienced little to no aversive feelings during either of the experimental conditions. The results suggest that the degree to which a women immerses and absorbs herself in a sexual stimulus has a significant impact in her subsequent cognitive and affective processing of that stimulus. More specifically, it appears that women respond more favourably when they are highly absorbed and immersed in a stimulus, reporting greater subjective sexual arousal and positive affect. Overall, the results of Studies One and Two highlight the dynamic and complex nature of female sexual arousal. It appears that women have definite cognitive and affective responses to sexual stimuli. The magnitude of these responses may be mediated by a number of factors however, including the intrinsic qualities of the stimulus and the degree to which the woman attends to the stimulus. Both these variables act to either enhance or inhibit the sexual arousal response. There results have important implications for current sexuality literature. While women’s cognitions and emotions in response to erotic film were generally highly correlated, in some instances they differed, warranting their inclusion as separate elements in models of female sexual arousal. Furthermore, it might be suggested that the inclusion of an additional variable – absorption – into current models of female sexual arousal would prove beneficial, aiding researchers to better understand and predict the arousal process. As such, recommendations are made for a revised model of female sexual arousal. In terms of future directions, the results of the present thesis have implications for the treatment of sexual dysfunctions, suggesting that clinicians need to understand the internal and external variables that might contribute to the aetiology and maintenance of their presenting problems.

Characterization of the moisture absorption and thermal ageing behaviour of polymeric composite systems using Raman spectroscopy

Advanced polymeric materials and their respective composites are fast becoming one of the world's most frequently used engineering materials. They find application in the manufacture of e.g. boat hulls, high performance motor vehicles, aircraft components and sports goods. Their high specific strength and specific stiffness give them the edge in applications where weight savings are critical, but their long-term durability is often questioned. These materials are susceptible to environmental conditions such as temperature and humidity. There is also a lack of relevant data, due to the long time-scales required for testing. In this study, the Raman technique has been used to monitor the degradation of two composite systems, namely: a rubber toughened vinylester material used in the marine industry and a high temperature bismaleimide/carbon fibre aerospace composite. Preliminary Raman studies show that the toughening rubber particles dispersed in the cured vinylester resin are leached out during hygrothermal ageing. The weight gain during ageing suggests that this leaching process occurs concurrently with the absorption of water molecules. An increase in the degree of cross-linking is observed when bismaleimide/carbon fibre composite is aged at high temperature. This cross- linking tendency decreases with increasing depth within the carbon fibre bundle.

Compressive behavior and energy absorption of constructed cellular aluminum

The defoThe deformation behaviors and energy absorption characteristics of constructed cellular aluminums were investigated by compressive tests. Constructed cellular aluminum specimens with two kinds of thickness in the cold-pressed panel and various numbers of layers bonded together have been tested. The plateau stress and the energy absorption have been measured and furthermore, the deformation behaviors have been evaluated. Results indicate that superior mechanical properties with constructed cellular aluminums can be achieved when the distribution of material at cell level is properly selected. Excellent energy absorption per unit mass can be obtained by only changing the thickness of the original aluminum sheet.nnation behaviors and energy absorption characteristics of constructed cellular aluminums were investigated by compressive tests. Constructed cellular aluminum specimens with two kinds of thickness in the cold-pressed panel and various numbers of layers bonded together have been tested. The plateau stress and the energy absorption have been measured and furthennore, the defonnation behaviors have been evaluated. Results indicate that superior mechanical properties with constructed cellular aluminums can be achieved when the distribution of material at cell level is properly selected. Excellent energy absorption per unit mass can be obtained by only changing the thickness of the original aluminum sheet.

Strain rate effects on the energy absorption of rapidly manufactured composite tubes

Quasi-static and intermediate rate axial crush tests were conducted on tubular specimens of Carbon/Epoxy (Toray T700/G83C) and Glass/Polypropylene (Twintex). The quasi-static tests were conducted at 10 mm/min (1.67 x 10¯⁴ m/s); five different crush initiators were used. Tests at intermediate rates were performed at speeds of 0.25, 0.5, 0.75, 1, 2, and 4m/s. Modes of failure and specific energy absorption (SEA) values were studied. The highest SEA measured was 86 kJ/kg. This value was observed using Carbon/Epoxy samples at quasi static rates with a 45° chamfer initiator. The highest energy absorption for Twintex tubes was observed to be 57.56 kJ/kg during 45° chamfer initiated tests at 0.25 m/s. Compared with steel and aluminium, SEA values of 15 and 30 kJ/kg, respectively, the benefits of using composite materials in crash structures become apparent.

Narrowed bandgaps and stronger excitonic effects from small boron nitride nanotubes

The bandgap of boron nitride nanotubes (BNNTs) is generally considered to be independent on tube radius and chirality. However, we have observed that the bandgaps of BNNTs do depend on the tube size. Photoluminescence excitation spectroscopy with variable photon energies in vacuum ultraviolet (VUV) range revealed that the bandgap becomes smaller when the tube diameter decreases. This is consistent with red-shifted luminescent emissions. The strong interactions between excitons and phonons are possibly responsible for the bandgap narrowing as the function of nanotube size. 2009 Elsevier B.V. All rights reserved.

Direct observation of defect levels in hexagonal BN by soft X-ray absorption spectroscopy

Formation of defects in hexagonal boron nitride under low-energy argon bombardment has been studied by near-edge X-ray absorption fine structure (NEXAFS) around B and N K-edges. Breaking of B-N bonds and creation of nitrogen vacancies has been identified from the B K-edge, followed by the formation of molecular nitrogen, N2, at interstitial positions. The presence of N2 produces a sharp resonance in the low-resolution NEXAFS spectra around N K-edge, showing the characteristic vibrational fine structure in high-resolution measurements. Several new peaks in NEXAFS spectra have been assigned to boron or nitrogen interstitials, in good agreement with theoretical predictions. © 2009 Elsevier B.V. All rights reserved.

Sound absorption characteristics of a precast panel system made from environmentally sustainable concrete

This paper investigates the sound absorption characteristics of a precast panel system made from an environmentally sustainable concrete which can be used as an acoustical material. A current research project undertaken at the School of Architecture and Building, Deakin University, aims at utilising alternative materials and innovative approach to concrete precasting in the production of architecturally pleasing concrete panels. The normal incidence sound absorption coefficients of the assemblies were measured using an impedance tube. In general, the peak frequencies reduced with increasing thickness of concrete. The preliminary results indicate that the sound absorption of a three-layer variation of the panel meet design specifications related to acoustic performance. The major benefits of this investigated approach to concrete and concrete precasting are the ease of tunability to specific peak frequency, improved aesthetics and utilisation of industrial waste.

ATR FT-IR absorption enhancement of a thin film under the photon-tunneling condition

A simple, yet very powerful technique for the spectral acquisition of an extremely thin film with enhanced absorption was explored. An infrared absorption of an extremely thin film confined between media of high refractive indices was greater than that of its bulk when the spectrum was acquired under the attenuated total reflection (ATR) condition with parallel (p) polarized radiation. The absorption enhancement was not observed under perpendicular (s) polarized radiation. Theoretical investigations indicated that the absorption enhancement was proportional to the integration of the mean square evanescent field within the film. The field integration under p-polarized radiation increased, while that under s-polarized radiation decreased as the thickness of the confined film became thinner. The maximum enhancement was observed when the film was sufficiently thinner than the penetration depth. The phenomena were experimentally investigated, and the results agreed very well with theoretical predictions.