A potential application of a piezoelectric atomiser for ophthalmic drug delivery

A liquid atomiser composed of a piezoelectric transducer and a metal plate with numerous micro-apertures is studied to identify the most influential factors on its atomising performance. The Taguchi method is employed in the experiment design and analysis of the study on how each factor acts in the atomising process. An optimal condition is determined for producing a stream of droplets. The study shows that the droplet size and the spraying velocity are suitable for ophthalmic drug delivery application, with an even distribution of the drug over most of the eyeball surface area due to the controllable cross-sectional area of the droplet stream. This greatly improves the treatment effectiveness and efficiency of eye therapy. Finally, a structure of the ophthalmic drug delivery system is proposed.

Effects of rosiglitazone on intramyocellular lipid accumulation in Psammomys obesus

Objective: To examine the effects of rosiglitazone in intramyocellular lipid (IMCL) content in diabetic Psammomys obesus using novel electron microscopy technologies.

Background: P. obesus is an unique polygenic model of obesity and type 2 diabetes. Male diabetic P. obesus were treated daily with 5 mg/Kg Rosiglitazone by oral gavage for 14 days. Data were compared with a group of age-matched diabetic P. obesus treated with saline vehicle.

Methods: Assessment of insulin resistance and adiposity were determine before and after the treatment period by oral glucose tolerance test (oGTT) and dual energy X-ray absorptiometry (DEXA) analysis. We used a new scanning electron microscopy technology, (WETSEM) to investigate the effects of rosiglitazone administration on IMCL content, size and distribution in red gastrocnemius muscle.

Results: Rosiglitazone treatment improved glucose tolerance in P. obesus with no difference in the overall body fat content although a significant reduction in subscapular fat mass was observed. Rosiglitazone changed the distribution of lipid droplet size in skeletal muscle. Treated animals tended to have smaller lipid droplets compared with saline-treated controls.

Conclusions: Since smaller IMCL droplets are associated with improvements in insulin sensitivity, we propose that this may be an important mechanism by which rosiglitazone affects glucose tolerance.

Exploring corrosion protection of Mg via ionic liquid pretreatment

We present the development of a 10–100 nanometer thick surface film upon pure Mg on exposure to an ionic liquid (IL) based on the bis(trifluoromethanesulfonyl)amide (TFSA) anion. This film formation is the result of the oxidative reactivity of the metal in the IL, with the subsequent effect of ultimately protecting the underlying metal from corrosion in aqueous chloride containing solution. Film formation was studied in the IL using an electrochemical droplet cell. It was seen that this film is adherent and subsequently facilitates appreciable protection against corrosion as judged by subsequent electrochemical testing in the form of potentiodynamic polarization and impedance spectroscopy, along with direct observation. The physical film morphology was studied by electron microscopy and focused ion beam.

Transient responses of a wetting film to mechanical and electrical perturbations

This article reports real-time observations and detailed modeling of the transient response of thin aqueous films bounded by a deformable surface to external mechanical and electrical perturbations. Such films, tens to hundreds of nanometers thick, are confined between a molecularly smooth mica plate and a deformable mercury/electrolyte interface on a protuberant drop at a sealed capillary tube. When the mercury is negatively charged, the water forms a wetting film on mica, stabilized by electrical double layer forces. Mechanical perturbations are produced by driving the mica plate toward or by retracting the mica plate from the mercury surface. Electrical perturbations are applied to change the electrical double layer interaction between the mica and the mercury by imposing a step change of the bias voltage between the mercury and the bulk electrolyte. A theoretical model has been developed that can account for these observations quantitatively. Comparison between experiments and theory indicates that a no-slip hydrodynamic boundary condition holds at the molecularly smooth mica/electrolyte surface and at the deformable mercury/electrolyte interface. An analysis of the transient response based on the model elucidates the complex interplay between disjoining pressure, hydrodynamic forces, and surface deformations. This study also provides insight into the mechanism and process of droplet coalescence and reveals a novel, counterintuitive mechanism that can lead to film instability and collapse when an attempt is made to thicken the film by pulling the bounding mercury and mica phases apart.

Directional water-transport fabrics achieved by wettablity gradient from superhydrophobicity to hydrophilicity

In this study, we demonstrate that fabrics having a wettability gradient from superhydrophobic to hydrophilic through the thickness direction show a novel directional water transfer effect: water can transfer only from the superhydrophobic to the hydrophilic side, but not in the opposite direction unless an external force is applied. A sol-gel technology was used to prepare a superhydrophobic coating on fabrics, and the coated fabrics showed water contact-angle as high as 165°. When the coated fabric was subjected to a photochemistry treatment from one fabric side, the irradiated surface turned hydrophilic permanently, while the back side still maintained the superhydrophobicity. The treated fabric can transfer water droplet rapidly from hydrophobic to hydrophilic side, and the pressure allowing water breakthrough the fabric is different considerably between the two fabric sides. The directional water transfer effect is also affected by the wettability gradient. Such a directional water transfer coating may be useful to develop new functional fabrics for defence applications.

Unidirectional water transfer effect from fabrics having a superhydrophobic-to-hydrophillic gradient

In this study, we demonstrate that fabrics having a wettability gradient from superhydrophobic to hydrophilic through the thickness direction show a novel directional water transfer effect: water can transfer from the superhydrophobic to the hydrophilic side, but not in the opposite direction unless an external force is applied. A sol-gel technology was used to prepare a nano-structured superhydrophobic coating on fabrics, and the coated fabrics showed water contact-angle as high as 165 degrees. When the coated fabric was subjected to a photochemistry treatment from one fabric side, the irradiated surface turned hydrophilic permanently, while the back side still maintained the superhydrophobicity. The treated fabric can transfer water droplet rapidly from hydrophobic to hydrophilic side, and the pressure allowing water breakthrough the fabric are different considerably between the two fabric sides. The directional water transfer effect is affected by the wettability gradient. Such a directional water transfer coating may be useful to develop new functional fabrics for defence applications.

Needleless electrospinning : developments and performances

Electrospinning technique has attracted a lot of interests recently, although it was invented in as early as 1934 by Anton (Anton, 1934). A basic electrospinning setup normally comprises a high voltage power supply, a syringe needle connected to power supply, and a counter-electrode collector as shown in Fig. 1. During electrospinning, a high electric voltage is applied to the polymer solution, which highly electrifies the solution droplet at the needle tip (Li & Xia, 2004). As a result, the solution droplet at the needle tip receives electric forces, drawing itself toward the opposite electrode, thus deforming into a conical shape (also known as “Taylor cone” (Taylor, 1969)). When the electric force overcomes the surface tension of the polymer solution, the polymer solution ejects off the tip of the “Taylor cone” to form a polymer jet. The charged jet is stretched by the strong electric force into a fine filament. Randomly deposited dry fibers can be obtained on the collector due to the evaporation of solvent in the filament. There are many factors affecting the electrospinning process and fiber properties, including polymer materials (e.g. polymer structure, molecular weight, solubility), solvent (e.g. boiling point, dielectric properties), solution properties (e.g. viscosity, concentration, conductivity, surface tension), operating conditions (e.g. applied voltage, collecting distance, flow rate), and ambient environment (e.g. temperature, gas environment, humidity).

Absorbance of retinal oil droplets of the budgerigar : sex, spatial and plumage morph-related variation

Intraspecific variation in photoreceptor physiology is known in several vertebrate taxa, but is currently unknown in birds, despite many avian traits varying intraspecifically, and avian visual ecology encompassing a wide range of environments and visual stimuli, which might influence spectral sensitivity. Avian retinal photoreceptors contain light absorbing carotenoid-rich oil droplets that affect vision. Carotenoids are also important plumage components. However, our understanding of the regulation of carotenoids in oil droplets remains rudimentary. Among birds, Melopsittacus undulatus has probably the best-studied colour vision, shows profound intraspecific variation in plumage colour, and increased plasma carotenoids during moult. We used microspectrophotometry to determine whether a relationship exists between oil droplet carotenoid concentration and plumage pigmentation, and tested for sex and spatial variation in droplet absorbance across the retina. Absorbance of one variety of P-type droplets was higher in males. No relationship was found between droplet absorbance and plumage colour. We found a spatial pattern of droplets absorbance across the retina that matched a pattern found in another parrot, and other avian species. Our work provides insights into the development and maintenance of retinal oil droplets and suggests a common mechanism and function for carotenoid deposition in the retina across bird species.

"Tomorrow's car" : Deakin Universities new cross vehicle that combines the best of 2 worlds

Motorbike riders are 34-times more likely to die in a crash compared to car drivers per km travelled (1). Such safety risks together with special skill requirements for the driver and much lower comfort compared to normal cars are the main reasons why motorbikes represent only a fraction of all vehicle sales in developed countries. Deakin University is developing a revolutionary cross-over fun vehicle with ultra low fuel consumption and emissions. This new vehicle generation combines the best of two worlds: the fun to drive, low cost, and small size of a scooter together with the safety, comfort and easiness to operate of a car. The result is a vehicle that is more fuel efficient than most cars or even scooters.

Various tilting cross over vehicles have been presented over the last decade that were trying to automate the tilting control of narrow vehicles to make them safer. Examples of these concepts are the Carver, Clever and in some way also the MP3 scooter from Piaggio. The problem with fully enclosed concepts like the Carver or Clever is that they require very complex and therefore also expensive tilting control systems so that the vehicles are not price competitive compared to low cost micro cars or even normal small cars. The MP3 on the other hand comes with a tilting control system which is only semi automatic so that typical car advantages - comprehensive safety features like crush zones, roll over protection, air bags, safety belts or comfort features like full weather protection including heating and cooling – can not be provided.

Deakin’s approach is quite different to the above mentioned concepts. The requirements were derived based on two different investigations: The first step was a critical evaluation of social trends and the second step was an in-depth benchmarking study of existing concepts which identified the typical strengths and weaknesses of these concepts. In a critical next step a new concept was created that addresses most of the weaknesses of existing tilting three-wheelers in a holistic approach by setting clear priority rankings for the vehicle targets, based on current trends. The priorities were set in the following order: Safety, Affordability, Fun and Efficiency (SAFE).

The key feature that enables an enclosed tilting vehicle is a fully automatic tilting control system. With an automatic tilting control system the driver does not need to put the feet on the ground to balance the vehicle when he stops, so the vehicle can be built with a full enclosure. This allows the implementation of typical car like safety features (seat belts, roll over structure, crush zones, air bags). The SafeRide™ tilting control system is a passive system that involves the driver’s balancing sense in its feedback control system. The vehicle has typical scooter like steering characteristics, where the steering is initiated through countersteering. Another safety critical design feature is the crush zone between the two front wheels which is not possible with only one front wheel or with the powertrain positioned between the front wheels, as the powertrain can’t absorb a lot of energy due to its structural stiffness and density. The passive tilting control system is quite simple and therefore makes the vehicle very affordable, an important factor for successful commercialisation.

Another advantage of integrating the human balancing senses in the feedback control of the tilting system is that the system kicks in slightly after the human balancing reacts. In some instances that can generate the typical adrenalin thrill known from riding a bike. This fun factor is quite common with many trend sports like mountain biking, surfing, roller-skating, snowboarding, or skateboarding. Some of these sports have seen very rapid growth only a short time after they have been invented. Utilising the human balancing system during driving also makes the vehicle safer as the adrenalin is produced after reaching a semi-stable driving condition that is controlled by the vehicles tilting control system, but before the vehicle reaches an unstable driving condition that can not be controlled by the vehicle but only (eventually) by the driver – if he has got the required driving skill and if he is alert enough.

Efficiency superior to most cars and scooters is achieved by the aerodynamics of a fully enclosed body structure in combination with the small frontal area of a typical scooter and the droplet shape enabled by the relatively wide front with 2 wheels and the very narrow tail with only one rear wheel. The passive tilting system also contributes to the extreme efficiency as the system only draws some small electrical power for the electronic control unit. Another feature is a low cost exhaust energy recovery system which is discussed in another paper.

Caveolin-1 orchestrates the balance between glucose and lipid-dependent energy metabolism : implications for liver regeneration

Caveolin-1 (CAV1) is a structural protein of caveolae involved in lipid homeostasis and endocytosis. Using newly generated pure Balb/C CAV1 null (Balb/CCAV1−/−) mice, CAV1−/− mice from Jackson Laboratories (JAXCAV1−/−), and CAV1−/− mice developed in the Kurzchalia Laboratory (KCAV1−/−), we show that under physiological conditions CAV1 expression in mouse tissues is necessary to guarantee an efficient progression of liver regeneration and mouse survival after partial hepatectomy. Absence of CAV1 in mouse tissues is compensated by the development of a carbohydrate-dependent anabolic adaptation. These results were supported by extracellular flux analysis of cellular glycolytic metabolism in CAV1-knockdown AML12 hepatocytes, suggesting cell autonomous effects of CAV1 loss in hepatic glycolysis. Unlike in KCAV1−/− livers, in JAXCAV1−/− livers CAV1 deficiency is compensated by activation of anabolic metabolism (pentose phosphate pathway and lipogenesis) allowing liver regeneration. Administration of 2-deoxy-glucose in JAXCAV1−/− mice indicated that liver regeneration in JAXCAV1−/− mice is strictly dependent on hepatic carbohydrate metabolism. Moreover, with the exception of regenerating JAXCAV1−/− livers, expression of CAV1 in mice is required for efficient hepatic lipid storage during fasting, liver regeneration, and diet-induced steatosis in the three CAV1−/− mouse strains. Furthermore, under these conditions CAV1 accumulates in the lipid droplet fraction in wildtype mouse hepatocytes. Conclusion: Our data demonstrate that lack of CAV1 alters hepatocyte energy metabolism homeostasis under physiological and pathological conditions.

Magnetic liquid marbles, their manipulation and application in optical probing

Magnetic liquid marbles, an encapsulation of liquid droplet with hydrophobic magnetic particles, show remarkable responsiveness to external magnetic force and great potential to be used as a discrete droplet microfluidic system. In this study, we presented the manipulation of a magnetic liquid marble under an external magnetic field and calculated the maximum frictional force, the magnetic force required for actuating the liquid marbles and the effective surface tension of the magnetic liquid marble, as well as the threshold volume for the transition from quasi-spherical to puddle-like shape. By taking advantage of the unique feature of being opened and closed reversibly, we have proven the encapsulated droplets can be detected optically with a reflection-mode probe. Combining the open-close and optical detection also enables to probe chemical reactions taking place within liquid marbles. These remarkable features offer a simple yet powerful alternative to conventional discrete microfluidic systems and may have wide applications in biomedical and drug discovery. © 2012 The Author(s).

Unidirectional water transfer effect from fabrics having a superhydrophobic-to-hydophilic gradient

In this study, we demonstrate that fabrics having a wettability gradient from superhydrophobic to hydrophilic through the thickness direction show a novel directional water transfer effect: water can transfer from the superhydrophobic to the hydrophilic side, but not in the opposite direction unless an external force is applied. A sol–gel technology was used to prepare a nano-structured superhydrophobic coating on fabrics, and the coated fabrics showed water contact-angle as high as 165 degrees. When the coated fabric was subjected to a photochemistry treatment from one fabric side, the irradiated surface turned hydrophilic permanently, while the back side still maintained the superhydrophobicity. The treated fabric can transfer water droplet rapidly from hydrophobic to hydrophilic side, and the pressure allowing water breakthrough the fabric are different considerably between the two fabric sides. The directional water transfer effect is affected by the wettability gradient. Such a directional water transfer coating may be useful to develop new functional fabrics for defence applications.