An evaluation of the impact of using authentic design and build industry projects in project-based learning

BACKGROUNDChisholm’s ‘first year experience’ is a significant feature of the new industry focused Bachelor of Engineering Technology program delivered in association with the South East Melbourne Manufacturers’ Alliance (SEMMA). This conceive-design-implement-operate (CDIO Initiative) program commenced as a full time program in first semester 2012. Whereas it is common for CDIO Initiative programs to have a first year experience program containing a project typical of the type of industry project they would complete as a graduate engineer or engineering technologist, this goes further by using real industry projects provided by SEMMA members.This design-and-build industry project runs across both semesters supporting project-based learning in three first year subjects. A concern is that the industry involvement of the projects adds substantially to an already heavy student workload. This has been further increased by the addition of two additional first year initiatives: writing workshops, and training in, and substantial use of, student oral presentations. It is recognised that an excessive workload could lead students to adopt surface learning approaches in other subjects.PURPOSEThe goal of the project is to evaluate student perceptions of the value and work load impact of the industry project and the other new first year initiatives.DESIGN/METHODCentral to this project is a student survey-based evaluation of the industry project based learning that is the core of the ‘first year experience’. The participants were limited to the small group of students who, in a single year, completed all three subjects that comprise the ‘first year experience’. To avoid compromising the results the survey was administered by Chisholm Institute’s Department of Strategy and Planning with no engineering technology degree program staff present. The survey included questions to enable responses to be linked with specific student demographics without identifying any of the respondents.RESULTSThe study showed the industry project-based learning had worthwhile outcomes but placed considerable time pressures on most respondents. For some, this also impacted on their other subjects. A first year oral presentation program was also shown to have worthwhile outcomes. However no conclusions could be reliably drawn on the third initiative – writing workshops.CONCLUSIONSThe results confirm that the authentic industry project is considered a worthwhile initiative but contributes significantly to student overload. This applies also – to a lesser extent – to the first year oral presentation program. Both also require new approaches to delivery as student numbers increase. Strategies to address these issues are discussed.

Design and fabrication of nano-sinusoid LSPR devices

Applications of LSPR nano-particles in various areas of solar cells, LSPR biosensors, and SERS biosensors, based on interaction of light with noble metal nano-particles is increasing. Therefore, design and nano-fabrication of the LSPR devices is a key step in developing such applications. Design of nano-structures with desirable spectral properties using numerical techniques such as finite difference time domain (FDTD) is the first step in this work. A new structure called nano-sinusoid, satisfying the some desirable LSPR characteristics, is designed and simulated using the FDTD method. In the next stage, analytical method of electro static eigen mode method is used to validate the simulation results. The, nano-fabrications method of electron beam lithography (EBL) is implemented to fabricate the proposed profile with high precision. Finally, atomic force microscopy (AFM) is used to investigate the shape of the fabricated nano-particles, and the dark field microscopy is employed to demonstrate the particular spectral characteristics of the proposed nano-sinusoids.

Effects of study design and allocation on participant behaviour-ESDA: study protocol for a randomized controlled trial

BACKGROUND: What study participants think about the nature of a study has been hypothesised to affect subsequent behaviour and to potentially bias study findings. In this trial we examine the impact of awareness of study design and allocation on participant drinking behaviour. METHODS/DESIGN: A three-arm parallel group randomised controlled trial design will be used. All recruitment, screening, randomisation, and follow-up will be conducted on-line among university students. Participants who indicate a hazardous level of alcohol consumption will be randomly assigned to one of three groups. Group A will be informed their drinking will be assessed at baseline and again in one month (as in a cohort study design). Group B will be told the study is an intervention trial and they are in the control group. Group C will be told the study is an intervention trial and they are in the intervention group. All will receive exactly the same brief educational material to read. After one month, alcohol intake for the past 4 weeks will be assessed. DISCUSSION: The experimental manipulations address subtle and previously unexplored ways in which participant behaviour may be unwittingly influenced by standard practice in trials. Given the necessity of relying on self-reported outcome, it will not be possible to distinguish true behaviour change from reporting artefact. This does not matter in the present study, as any effects of awareness of study design or allocation involve bias that is not well understood. There has been little research on awareness effects, and our outcomes will provide an indication of the possible value of further studies of this type and inform hypothesis generation. TRIAL REGISTRATION: Australia and New Zealand Clinical Trials Register (ANZCTR): ACTRN12610000846022.

Design and fabrication of a capacitance based wearable pressure sensor using e-textiles

This paper addresses the methods used for the design and fabrication of a capacitance based wearable pressure sensor fabricated using neoprene and (SAC) plated Nylon Fabric. The experimental set up for the pressure sensor is comprised of a shielded grid of sensing modules, a 555 timer based transduction circuitry, and an Arduino board measuring the frequency of signal to a corresponding pressure. The fundamental design parameters addressed during the development of the pressure sensor presented in this paper are based on size, simplicity, cost, adaptability, and scalability. The design approach adopted in this paper results in a sensor module that is less obtrusive, has a thinner and flexible profile, and its sensitivity is easily scalable for ‘smart’ product applications across industries associated to sports performance, ergonomics, rehabilitation, etc.

Building a local design and entrepreneurship ecosystem

Design and creativity are becoming greatly sought out skills in leading industries around the world, big businesses are developing the “Chief Design Officer” to engage with strategic and company shaping discussions. Design as an economic driver is now abundantly clear with companies such as Nike and Apple leading this way of thinking, but how do we as Australian industry capture this and how do we instil “creativity” into our secondary school and university level education to drive the next level of innovation and development. The local region where Deakin University is situated has undergone significant changes in the last 10 years, what was once an economy dominated by oil, automotive and metal production industries has been wound down to a local economy dominated by health, services and education. However, manufacturing and design being the front end of manufacturing is still a key economic driver this study is looking at the embryonic initiatives undertaken to build an ecosystem of design and entrepreneurship in a regional area. Several aspects will be looked at, high school and university student engagement in the process, established SME's and start-up culture. With the establishment of an ecosystem it is believed that success will breed success. With student engagement showing that being creative and playing can yield tangible results, it also gets students comfortable with the element of risk. The efforts of Deakin University is about providing the framework and scaffolding for students to pursue a start-up idea and test it validity. The final part of the ecosystem is for SME's and recent start-ups to share their success stories and acting as mentors as future start-ups emerge. By creating an ecosystem that is driven by design, manufacturing and entrepreneurship key economic outcomes will be generated; a regional area will be more resilient to economic uncertainty and ultimately a cohort of innovative thinkers that will generate value for their community.

Remotely delivered exercise-based cardiac rehabilitation: design and content development of a novel mHealth platform

BACKGROUND: Participation in traditional center-based cardiac rehabilitation exercise programs (exCR) is limited by accessibility barriers. Mobile health (mHealth) technologies can overcome these barriers while preserving critical attributes of center-based exCR monitoring and coaching, but these opportunities have not yet been capitalized on.

OBJECTIVE: We aimed to design and develop an evidence- and theory-based mHealth platform for remote delivery of exCR to any geographical location.

METHODS: An iterative process was used to design and develop an evidence- and theory-based mHealth platform (REMOTE-CR) that provides real-time remote exercise monitoring and coaching, behavior change education, and social support.

RESULTS: The REMOTE-CR platform comprises a commercially available smartphone and wearable sensor, custom smartphone and Web-based applications (apps), and a custom middleware. The platform allows exCR specialists to monitor patients' exercise and provide individualized coaching in real-time, from almost any location, and provide behavior change education and social support. Intervention content incorporates Social Cognitive Theory, Self-determination Theory, and a taxonomy of behavior change techniques. Exercise components are based on guidelines for clinical exercise prescription.

CONCLUSIONS: The REMOTE-CR platform extends the capabilities of previous telehealth exCR platforms and narrows the gap between existing center- and home-based exCR services. REMOTE-CR can complement center-based exCR by providing an alternative option for patients whose needs are not being met. Remotely monitored exCR may be more cost-effective than establishing additional center-based programs. The effectiveness and acceptability of REMOTE-CR are now being evaluated in a noninferiority randomized controlled trial.

Using digital devices in a first year classroom : a focus on the design and use of phonics software applications

When integrated within a holistic literacy program, phonics applications can be used in classrooms to facilitate students’ self-directed learning of letter-sound knowledge; but are they designed to allow for such a purpose? With most phonics software applications making heavy use of image cues, this project has more specifically investigated whether the design of the images used in such applications may impact on the effectiveness of their self-directed use in classrooms. Using a quasi-experimental study, we compared two types of pictorial mnemonics used in tablet applications, along with teacher-led activity in three first-year classrooms from the one school. The difference between teacher-led activity and integrated picture cues was significant, with teacher-led activity proving more effective. The difference between teacher-led activity and form-taking picture cues, however, was not statistically significant. Given that the outcomes of this small-scale study suggest that image design may be a significant design feature contributing to the educational value of using phonics applications in the classroom, we recommend that the design features of phonics software applications attract further research.