Influences of steady and cyclic die rotation on the compression of aluminium

A series of experiments are reported for compression of an aluminum cylinder with monotonic and cyclic die rotation. When the die is monotonically rotated, a higher angular velocity or a lower compression speed of the tool leads to a greater load reduction in comparison of that seen with a stationary die. The test results also show that cyclic die rotation causes a cyclic fluctuation in the load-displacement curve. During the die deceleration phase, the compression load increases until it reaches the level obtained in conventional compression with stationary dies. However, the compression load is observed to reduce to levels lower than those obtained in monotonic rotating compression tests during the die acceleration phase. The frequency of rotating direction change seems to affect the position of load peaks only, not the amplitude of the peaks.

First isolation and structural determination of cyclic β-(1→2)-glucans from an alga, Chlorella pyrenoidosa

The aqueous extract of the edible green microalgae Chlorella pyrenoidosa is of interest because of its immunostimulatory activity. Some components in the extract have been identified previously, namely a unique type of arabinogalactan and a galactofuran. Further fractionation of this extract was accomplished by treating the aqueous solution of the fraction precipitated by addition of 1.5vol of 95% ethanol with cetyltrimethylammonium bromide. The residue obtained by concentration of the supernatant was fractionated further by anion-exchange chromatography and size-exclusion chromatography on Sephadex G-100. Two fractions from the latter column were retained, of which one was a starch-like alpha-(1-->4)-linked d-glucan with some alpha-(1-->6) branches, and the other contained a starch plus a mixture of beta-(1-->2)-d-glucans. ESI mass spectrometry was used to show that the mixture contained both cyclic and linear beta-(1-->2)-d-glucans in a cyclic:linear ratio of 64:36, based on intensities of mass spectral peaks. For the cyclic beta-(1-->2)-d-glucans, ring sizes ranged from 18 to 35 monosaccharides with the ring containing 21 glucose units (54% of the cyclic glucans) being greater than three times more abundant than the next most abundant component, the ring containing 22 glucose units (15%). No rings containing 20 glucose units were present. This is the first observation of cyclic beta-(1-->2)-d-glucans in algae, as far as we are aware. For the linear beta-(1-->2)-d-glucans, the component containing 20 glucoses was most abundant (35% of the linear glucans), while the component containing 21 glucose units was the next most abundant (17%). These relatively low-molecular-weight glucans had low immunostimulatory activity.

Cyclic deformation of advanced high-strength steels : mechanical behavior and microstructural analysis

The fatigue properties of multiphase steels are an important consideration in the automotive industry. The different microstructural phases present in these steels can influence the strain life and cyclic stabilized strength of the material due to the way in which these phases accommodate the applied cyclic strain. Fully reversed strain-controlled low-cycle fatigue tests have been used to determine the mechanical fatigue performance of a dual-phase (DP) 590 and transformation-induced plasticity (TRIP) 780 steel, with transmission electron microscopy (TEM) used to examine the deformed microstructures. It is shown that the higher strain life and cyclic stabilized strength of the TRIP steel can be attributed to an increased yield strength. Despite the presence of significant levels of retained austenite in the TRIP steel, both steels exhibited similar cyclic softening behavior at a range of strain amplitudes due to comparable ferrite volume fractions and yielding characteristics. Both steels formed low-energy dislocation structures in the ferrite during cyclic straining.

Aspergillus species, cyclic dimeric dipeptide derivative substance P antagonist biosynthetic products thereof, and process for preparation thereof

A novel Aspergillus species, cyclic dimeric dipeptide derivatives which are biosynthetic products thereof and are useful as Substance P antagonists and therefore as analgesic and/or antiinflammatory agents, and a process for preparation of the biosynthetic products are disclosed.

The Pacific OPIC project (Obesity Prevention in Communities) - objectives and designs

Background: Evidence on how to reduce the increasing prevalence of youth obesity is urgently needed in many countries.The Pacific OPIC Project (Obesity Prevention In Communities) is a series of linked studies in four countries (Fiji, Tonga, New Zealand, Australia) which is designed to address this important problem.
Objectives: The studies aim to: 1) determine the overall impact of comprehensive, community-based intervention programs on overweight/obesity prevalence in youth; 2) assess the feasibility of the specific intervention components and their impacts on eating and physical activity patterns; 3) understand the socio-cultural factors that promote obesity and how they can be infl uenced; 4) identify the effects of food-related policies in Fiji and Tonga and how they might be changed; 5) estimate the overall burden of childhood obesity (including loss of quality of life); 6) estimate the costs (and cost-effectiveness) of the intervention programs, and; 7) increase the capacity for obesity prevention research and action in Pacific populations.
Design: The community studies use quasi-experimental designs with impact and outcome assessments being measured in over 14,000 youth across the intervention and control communities in the four sites. The multi-strategy, multi-setting interventions will run for 3 years before fi nal follow up data are collected in 2008. The interventions are being informed by socio-cultural studies that will determine the family and societal infl uences on food intake, physical activity and body size perception.
Progress and conclusions: Baseline studies have been completed and interventions are underway. Despite the many challenges in implementing and evaluating community-based interventions, especially in the Pacifi c, the OPIC Project will provide rich evidence about what works and what does not work for obesity prevention in youth from European and Pacific backgrounds.

On the role of cyclic unsaturated additives on the behaviour of lithium metal electrodes in ionic liquid electrolytes

Three cyclic vinyl based additives, based respectively on oxygen, sulphur and fluorine, are tested for their ability to improve the cycling of lithium in a hostile ionic liquid medium. Oxygen based vinylene carbonate is found to offer the best protection of the lithium metal whilst allowing very consistent lithium cycling to occur. The vinylene carbonate based system under study is, however, imperfect. Lithium metal is deposited in a dendritic morphology, and vinylene carbonate is rapidly consumed during lithium cycling if it is present in a small quantity. Our results suggest that ionic liquid systems critically relying on a small amount of additive to protect a lithium electrode are not viable for long cycle life secondary batteries. It is suggested that an ionic liquid which itself is lithium metal compatible be used instead.

Moral rights, heritage and Australian contemporary architecture : thoughts & designs of Peter Muller

Peter Muller is one of the most unique Australian architects of the 20th century possessing a passion for organic architecture realised in several significant Australian and Indonesian design exemplars. His inquiry in the organic style of architecture stylistically mirrors that of Frank Lloyd Wright whom wrote to Muller expressing his pleasure in his successful pursuit of this style in Australia.3 This paper considers the position of moral rights under the Australian Copyright Act 19684 having regard to the Australian exemplars of Muller. It considers recent Australian debates about moral rights and projects that implicate several architectural and landscape architecture projects, the interpretations the legal fraternity are taking in approaching this topic, and positions the ideas, values, and attitudes of Muller in this context. Muller’s personal opinion is expressed providing an insight into the thoughts of one senior contemporary Australia architect as to 'their' architecture and ‘heritage’.