System boundary selection in life-cycle inventories using hybrid approaches

Life-cycle assessment (LCA) is a method for evaluating the environmental impacts of products holistically, including direct and supply chain impacts. The current LCA methodologies and the standards by the International Organization for Standardization (ISO) impose practical difficulties for drawing system boundaries; decisions on inclusion or exclusion of processes in an analysis (the cutoff criteria) are typically not made on a scientific basis. In particular, the requirement of deciding which processes could be excluded from the inventory can be rather difficult to meet because many excluded processes have often never been assessed by the practitioner, and therefore, their negligibility cannot be guaranteed. LCA studies utilizing economic input−output analysis have shown that, in practice, excluded processes can contribute as much to the product system under study as included processes; thus, the subjective determination of the system boundary may lead to invalid results. System boundaries in LCA are discussed herein with particular attention to outlining hybrid approaches as methods for resolving the boundary selection problem in LCA. An input−output model can be used to describe at least a part of a product system, and an ISO-compatible system boundary selection procedure can be designed by applying hybrid input−output-assisted approaches. There are several hybrid input−output analysis-based LCA methods that can be implemented in practice for broadening system boundary and also for ISO compliance.

The lactation cycle of the fur seal

The fur seal is a mammal with an unusual ability to turn its milk production on and off without significantly altering the gross morphology of the mammary gland. This atypical lactation cycle is due to the fact that maternal foraging and infant nursing are spatially and temporally separate (Bonner, 1984). Maternal care involves the suckling of offspring over a period of at least 4 months, but lactation can extend to more than 12 months. Following a perinatal fast of approximately 1 week, females depart the breeding colony to forage at sea and, for the remainder of lactation, alternate between short periods ashore suckling their young with longer periods of up to 4 weeks foraging at sea. Whilst foraging at sea, milk production in the fur seal mammary gland either ceases or is reduced (Arnould & Boyd, 1995b).

Ageing effects on knee and ankle joint angles at key events and phases of the gait cycle.

The objective of this research was to determine whether joint angles at critical gait events and during major energy generation/absorption phases of the gait cycle would reliably discriminate age-related degeneration during unobstructed walking. The gaits of 24 healthy adults (12 young and 12 elderly) were analysed using the PEAK Motus motion analysis system. The elderly participants showed significantly greater single (60.3% versus 62.3%, p < 0.01) and double ( p < 0.05) support times, reduced knee flexion (47.7° versus 43.0°, p < 0.05) and ankle plantarflexion (16.8° compared to 3.3°, p = 0.053) at toe off, reduced knee flexion during push-off and reduced ankle dorsiflexion (16.8° compared to 22.0°, p < 0.05) during the swing phase. The plantarflexing ankle joint motion during the stance to swing phase transition (A₂) for the young group (31.3°) was about twice ( p < 0.05) that of the elderly (16.9°). Reduced knee extension range of motion suggests that the elderly favoured a flexed-knee gait to assist in weight acceptance. Reduced dorsiflexion by the elderly in the swing phase implies greater risk of toe contact with obstacles. Overall, the results suggest that joint angle measures at critical events/phases in the gait cycle provide a useful indication of age-related degeneration in the control of lower limb trajectories during unobstructed walking.

The life cycle of the AFL footballer : If you sell your body, mind and soul what is left when the cheering stops?

In this paper we will draw on research conducted for the AFL which, in part, illuminated aspects of the Faustian pact that many young men enter into in order to become an elite level, professional footballer in what is increasingly a global sports entertainment industry. In order to develop an identity as an AFL footballer these young men willingly sell their body, mind and soul to one club, or to many. For varying lengths of time these pacts can have significant payoffs - in terms of a sense of self, and in monetary terms. For many though, these payoffs are limited and must be accounted for sometime in the future - an accounting that in Faustian terms, can carry significant costs to the body, mind and soul long after the cheering has stopped, and when the benefits come mainly in the form of memories. In this paper we argue that elements of these pacts can be identified and analysed via the following: understanding AFL as a sports entertainment business; using Foucault's work on the care of the self to explore what it means to be an elite level professional and the demands made by others on the body, mind and soul of players; and the idea that a career as an elite level professional footballer has a number of phases (early, mid and late) in which the nature of a professional identity - shaped by different demands on the body, mind and soul- changes.

A life cycle inventory of aluminium die casting

As part of an ongoing project, a life cycle inventory (LCI) of aluminium high pressure die casting (HPDC) has been collected. This has been conducted from the view of an individual product and also the entire process. The objective of the study was to analyse the process and suggest changes to reduce environmental impacts. One modem aluminium high pressure die casting plant located in Victoria, Australia was evaluated and modelled. Site specific data on energy and materials was gathered and the process was modelled using a typical automotive component. The paper also presents our experience and methodology used in this inventory data collection process from the real industry for LCA purposes. The inventory data collected itself reveals that the HPDC process is energy intensive and as such the major emissions were from the use of natural gas fired furnaces and from the brown coal derived electricity. It is also found the large environmental benefits of using secondary aluminium over primary aluminium in the HPDC process. A detailed LCA is being cal1ied out based on the inventory obtained.

An investigation of the behaviour of Australia's business cycle

In this paper we examine the relative importance of permanent and transitory shocks in explaining variations in income, consumption and investment at business cycle horizons for Australia. We use the common trend–common cycle restrictions to estimate a variance decomposition of shocks, and find that over short horizons the bulk of the variations in income and investment are due to permanent shocks, while transitory shocks explain the bulk of the variations in consumption. The former finding is consistent with real business cycle models which attribute business cycles to aggregate supply shocks, while the findings for consumption are consistent with the Keynesian view, which attributes business cycles to aggregate demand shocks.

Understanding the importance of permanent and transitory shocks at business cycle horizons for the UK

The goal of this paper is to examine the relative importance of permanent and transitory shocks in explaining variations in macroeconomic aggregates for the UK at business cycle horizons. Using the common trend–common cycle restrictions, we estimate a variance decomposition of shocks, and find that over short horizons the bulk of the variations in income and consumption were due to permanent shocks while transitory shocks explain the bulk of the variations in investment. Our findings for income and consumption are consistent with real business cycle models which emphasize the role of aggregate supply shocks, while our findings for investment are consistent with the Keynesian school of thought, which emphasizes the role of aggregate demand shocks in explaining business cycles.

The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel

The scope of this study was to examine the effects of plane strain prestrain, induced via cold-rolling, and subsequent automotive paint bake hardening cycle on both tensile and fatigue properties of a hot rolled TRIP780 multiphase steel. Strain-life data has been generated for as-received (0% prestrain), 10% and 20% prestrained samples, in both baked and unbaked conditions. Cold rolling  increased the number of strain reversals to failure at high cyclic strain amplitudes with no effect at low strain amplitudes. Bake hardening increased the number of reversals to failure at high cyclic strain amplitudes. The prestrained material exhibited partial cyclic softening, with some residual strength increase. The residual strength increase was attributed to the austenite to martensite transformation that occurred during the prestraining process.

Do permanent shocks explain income levels? a common cycle-common trend analysis of regional income levels for China

In this paper, we analyse per capita income levels of China's three main regions: the western region, the eastern region and the central region using common cycle and common trend tests. Our main contribution is that we impose the common cycle and common trend restrictions in decomposing shocks into permanent and transitory components. We find that: (i) there is evidence for two cointegrating relationships and one common cycle; and (ii) the variance decomposition analysis of shocks provides evidence that over short horizons, permanent shocks play a large role in explaining variations in regional per capita incomes.

Dynamic pacing strategies during the cycle phase of an ironman triathlon

Introduction: A nonlinear dynamic systems model has previously been proposed to explain pacing strategies employed during exercise.

Purpose: This study was conducted to examine the pacing strategies used under varying conditions during the cycle phase of an Ironman triathlon.

Methods: The bicycles of six well-trained male triathletes were equipped with SRM power meters set to record power output, cadence, speed, and heart rate. The flat, three-lap, out-and-back cycle course, coupled with relatively consistent wind conditions (17-30 km·h-1), enabled comparisons to be made between three consecutive 60-km laps and relative wind direction (headwind vs tailwind).

Results: Participants finished the cycle phase (180 km) with consistently fast performance times (5 h, 11 ± 2 min; top 10% of all finishers). Average power output (239 ± 25 to 203 ± 20 W), cadence (89 ± 6 to 82 ± 8 rpm), and speed (36.5 ± 0.8 to 33.1 ± 0.8 km·h-1) all significantly decreased with increasing number of laps (P < 0.05). These variables, however, were not significantly different between headwind and tailwind sections. The deviation (SD) in power output and cadence did not change with increasing number of laps; however, the deviations in torque (6.8 ± 1.6 and 5.8 ± 1.3 N·m) and speed (2.1 ± 0.5 and 1.6 ± 0.3 km·h-1) were significantly greater under headwind compared with tailwind conditions, respectively. The median power frequency tended to be lower in headwind (0.0480 ± 0.0083) compared with tailwind (0.0531 ± 0.0101) sections.

Conclusion: These data show evidence that a nonlinear dynamic pacing strategy is used by well-trained triathletes throughout various segments and conditions of the Ironman cycle phase. Moreover, an increased variation in torque and speed was found in the headwind versus the tailwind condition.