Optimal ground control points for geometric correction using genetic algorithm with glboal accuracy

Establishing the ground control point (GCP) network is a pre-requisite for georeferencing raw image data. Given current typical digital spatial database quality, much interest among users is about the accuracy of the geometric correction model that yields the final product. This paper reports an approach to optimizing GCP assembly using a genetic/evolution algorithm. The paper also suggests an optimal criterion for accuracy assessment through appraisal of global accuracy of the transformation, which is computed at each point of the image space. Experimental results demonstrate that the proposed approach has a great potential for selection of the best GCPs, and considerable improvement to the accuracy of geometric correction models can be expected when it is implemented.

Optimizing time delay feedback for active vibration control of a cantilever beam using a genetic algorithm

Active vibration control using time delay for a cantilever beam is developed in this paper. The equation of motion of the system is developed using the discrete standard formulation, and the discrete quadratic function is used to design the controller. The original contribution in this paper is using a genetic algorithm to determine the optimal time delay feedback for active vibration control of a cantilever beam. Simulations of the beam demonstrated that the genetic algorithm correctly identified the time delay which produced the quickest attenuation of unwanted vibrations for both mode one and mode two. In terms of frequency response, the optimal time delay for both modes reduced the resonant amplitude. In a mixed mode situation, the simulation demonstrated that an optimal time delay could be identified.

Speed control and policing in a cellular mobile network: speedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (Vehicular Velocity Limiting System). VVLS is mounted on the vehicle and responds to the command signals generated by the base station. It also determines the next base station to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust Extended Kalman Filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile user’s velocity with low system complexity as it requires two closest mobile base station measurements and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Benchmark generation algorithm for stochastic mixed model assembly shop simulation and optimization

The Operations Research (OR) community have defined many deterministic manufacturing control problems mainly focused on scheduling. Well-defined benchmark problems provide a mechanism for communication of the effectiveness of different optimization algorithms. Manufacturing problems within industry are stochastic and complex. Common features of these problems include: variable demand, machine part specific breakdown patterns, part machine specific process durations, continuous production, Finished Goods Inventory (FGI) buffers, bottleneck machines and limited production capacity. Discrete Event Simulation (DES) is a commonly used tool for studying manufacturing systems of realistic complexity. There are few reports of detail-rich benchmark problems for use within the simulation optimization community that are as complex as those faced by production managers. This work details an algorithm that can be used to create single and multistage production control problems. The reported software implementation of the algorithm generates text files in eXtensible Markup Language (XML) format that are easily edited and understood as well as being cross-platform compatible. The distribution and acceptance of benchmark problems generated with the algorithm would enable researchers working on simulation and optimization of manufacturing problems to effectively communicate results to benefit the field in general.

A reinforcement learning approach for robot control in an unknown environment

In this paper, a control approach based on reinforcement learning is present for a robot to complete a dynamic task in an unknown environment. First, a temporal difference-based reinforcement learning algorithm and its evaluation function are used to make the robot learn with its trials and errors as well as experiences. Second, the simulation are carried out to adjust the parameters of the learning algorithm and determine an optimal policy by using the models of a robot. Last, the effectiveness of the present approach is demonstrated by balancing an inverse pendulum in the unknown environment.

Speed control and policing in a cellular mobile network: SpeedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations (possibly other vehicles in the network) keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (vehicular velocity limiting system). VVLS is mounted in the vehicle and responds to the command signals generated by the base station. It also determines the next basestation to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust extended Kalman filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile users velocity with low system complexity as it requires two closet mobile-base station measurement and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Location based power control for mobile devices in a cellular network

This paper provides location estimation based power control strategy for cellular radio systems via a location based interference management scheme. Our approach considers the carrier-to-interference as dependent on the transmitter and receiver separation distance and therefore an accurate estimation of the precise locations can provide the power critical mobile user to control the transition power accordingly. In this fully
distributed algorithms, we propose using a Robust Extended Kalman Filter (REKF) to derive an estimate of the mobile user’s closest mobile base station from the user’s location, heading and altitude. Our analysis demonstrates that this algorithm can successfully track the mobile users with less system complexity, as it requires measurements from only one or two closest mobile base stations and hence enable the user to transmit at the rate that is sufficient for the interference management. Our power control
algorithms based on this estimation converges to the desired power trajectory. Further, the technique is robust against system uncertainties caused by the inherent deterministic nature of the mobility model. Through simulation, we show the accuracy of our prediction algorithm and the simplicity of its implementation.

Haptic control of multi-axis robotic systems

Control of tele-operated remote robot’s is nothing new; the public was introduced to this 'new' field in 1986 when the Chernobyl cleanup began. Pictures of weird and wonderful robotic workers pouring concrete or moving rubble flooded the world. Integration of force feedback or 'haptics' to remote robot's is a new development and one that is likely to make a big difference in man-machine interaction. Development of haptic capable tele-operation schema is a challenge. Often platform specific software is developed for one off tasks. This research focussed on the development of an open software platform for haptic control of multiple remote robotic platforms. The software utilises efficient server/client architecture for low data latency, while efficiently performing required kinematic transforms and data manipulation in real time. A description of the algorithm, software interface and hardware is presented in this paper. Preliminary results are encouraging as haptic control has been shown to greatly enhances remote positioning tasks.

Smart cluster bombs - control of multi-agent systems for military applications

This paper introduces an aggregation algorithm for airborne swarming guided weapon systems, which can aggregate munitions into a given shape while reaching the surface. The algorithm uses an artificial force based controller to navigate the members of the swarm into the desired geographical position and evenly distribute them inside the shape. Inter-member repulsion forces are used to avoid collisions among members, which is crucial for a weapon deployment system. Moreover, a lower bound for the release height was obtained which guarantee convergence of the complete weapon system into the target area. The proposed swarming guided weapon system was tested using computer simulations.

The health watch case - control study of leukemia and benzene:the story so far

A case–control study nested in the Health Watch cohort of petroleum industry workers, investigated whether the excess of lymphohematopoetic cancers, identified among male members of the Health Watch cohort, was associated with benzene exposure. Cases of non-Hodgkin’s lymphoma (n=31),multiple myeloma (n=15), and leukemia (n=33)were identified between 1981 and 1999. Cases were age-matched to five controls. Exposure was retrospectively estimated for each occupational history using an algorithm in a relational database. Benzene exposure measurements, supplied by Australian petroleum companies, were used to estimate exposure for specific tasks. The tasks carried out within the job, the products handled, and the technology used,were identified from interviews with contemporary colleagues. More than half of the subjects started work after 1965 and had an average exposure period of 20 years. Exposure was low, 85% of the cumulative exposure estimates were<10 ppm years. Matched analyses showed that non-Hodgkin’s lymphoma and multiple myeloma were not associated with benzene exposure. Leukemia risk, however, was significantly increased for the subjects with greater than 16 ppm years cumulative exposure, odds ratio (OR) 51.9 (5.6–477) or with greater than 0.8 ppm intensity of highest exposed job. Cumulative exposures were similar to those found in comparable studies.The inclusion of occasional high exposures, for example, as a result of spillages, reduced the ORs, when the exposure was treated as either a continuous or a categorical variable. Our data demonstrate a strong association between leukemia and modest benzene exposure. The choice of cut-point and reference group has a marked effect on the ORs, but does not change the overall conclusions.

A distributed approach to global feedback control of multi-agent systems

This paper presents a distributed approach to global state feedback control of for multi-agent systems. The proposed solution is obtained from the construction of decentralised functional observers. The required local control signal is generated asymptotically using only corresponding local output information. It is shown that a complete distribution of the control of a decentralised system having N agents can be achieved upon the satisfaction of some necessary conditions, and that the resulting controller can emulate the performance of a global state feedback controller. A step-by-step design algorithm is given. Its simplicity and correctness are illustrated through a numerical example.

Eccentricity and hardness control in cold rolling mills with a dynamically constructed neural controller

The main objective of a steel strip rolling process is to produce high quality steel at a desired thickness.  Thickness reduction is the result of the speed difference between the incoming and the outgoing steel strip and the application of the large normal forces via the backup and the work rolls.  Gauge control of a cold rolled steel strip is achieved using the gaugemeter principle that works adequately for the input gauge changes and the strip hardness changes.  However, the compensation of some factors is problematic, for example, eccentricity of the backup rolls.  This cyclic eccentricity effect causes a gauge deviation, but more importantly, a signal is passed to the gap position control so to increase the eccentricity deviation.  Consequently, the required high product tolerances are severely limited by the presence of the roll eccentricity effects.
In this paper a direct model reference adaptive control (MRAC) scheme with dynamically constructed neural controller was used.  The aim here is to find the simplest controller structure capable of achieving an optimal performance.  The stability of the adaptive neural control scheme (i.e. the requirement of persistency of excitation and bounded learning rates) is addressed by using as the inputs to the reference model the plant's state variables.  In such a case, excitation is due to actual plant signals (states) affected by plant disturbances and noise.  In addition, a reference model in the form of a filter with a desired transfer function using Modulus Optimum design was used to ensure variance in the desired dynamic characteristics of the system.  The gradually decreasing learning rate employed by the neural controller in this paper is aimed at eliminating controller instability resulting from over-aggressive control.  The moving target problem (i.e. the difficulty of global neural networks to perfrom several separate computational tasks in closed -loop control) is addressed by the localized architecture of the controller.  The above control scheme and learning algorithm offers a method for automatic discovery of an efficient controller.
The resulting neural controller produces an excellent disturbance rejection in both cases of eccentricity and hardness disturbances, reducing the gauge deviation due to eccentricity disturbance from 33.36% to 4.57% on average, and the gauge deviation due to hardness disturbance from 12.59% to 2.08%.

Comments on "Adaptive multiple-surface sliding control for non-autonomous systems with mismatched uncertainties"

This note points out that the time complexity of the main multiple-surface sliding control (MSSC) algorithm in Huang and Chen [Huang, A. C. & Chen, Y. C. (2004). Adaptive multiple-surface sliding control for non-autonomous systems with mismatched uncertainties. Automatica, 40(11), 1939-1945] is O(2^n). Here, we propose a simplified recursive design MSSC algorithm with time complexity O(n), and, using mathematical induction, we show that this algorithm agrees with this MSSC law.

Robust finite-time consensus tracking algorithm for multirobot systems

This paper studies the finite-time consensus tracking control for multirobot systems. We prove that finite-time consensus tracking of multiagent systems can be achieved on the terminal sliding-mode surface. Also, we show that the proposed error function can be modified to achieve relative state deviation between agents. These results are then applied to the finite-time consensus tracking control of multirobot systems with input disturbances. Simulation results are presented to validate the analysis.

Finite-time consensus algorithm of multi-agent networks

This paper is concerned with leader-follower finite-time consensus control of multi-agent networks with input disturbances. Terminal sliding mode control scheme is used to design the distributed control law. A new terminal sliding mode surface is proposed to guarantee finite-time consensus under fixed topology, with the common assumption that the position and the velocity of the active leader is known to its neighbors only. By using the finite-time Lyapunov stability theorem, it is shown that if the directed graph of the network has a directed spanning tree, then the terminal sliding mode control law can guarantee finite-time consensus even under the assumption that the time-varying control input of the active leader is unknown to any follower.