Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys

High entropy alloys (HEA) are a relatively new metal alloy system that have promising potential in high temperature applications. These multi-component alloys are typically produced by arc-melting, requiring several remelts to achieve chemical homogeneity. Direct laser fabrication (DLF) is a rapid prototyping technique, which produces complex components from alloy powder by selectively melting micron-sized powder in successive layers. However, studies of the fabrication of complex alloys from simple elemental powder blends are sparse. In this study, DLF was employed to fabricate bulk samples of three alloys based on the AlxCoCrFeNi HEA system, where x was 0.3, 0.6 and 0.85M fraction of Al. This produced FCC, FCC/BCC and BCC crystal structures, respectively. Corresponding alloys were also produced by arc-melting, and all microstructures were characterised and compared longitudinal and transverse to the build/solidification direction by x-ray diffraction, glow discharge optical emission spectroscopy and scanning electron microscopy (EDX and EBSD). Strong similarities were observed between the single phase FCC and BCC alloys produced by both techniques, however the FCC/BCC structures differed significantly. This has been attributed to a difference in the solidification rate and thermal gradient in the melt pool between the two different techniques. Room temperature compression testing showed very similar mechanical behaviour and properties for the two different processing routes. DLF was concluded to be a successful technique to manufacture bulk HEA[U+05F3]s.

Analytical assessment of optimum magnet pole-arc for PMSM under influence of different magnetization patterns

Permanent magnet synchronous machines (PMSMs) are popular in both industrial and domestic applications because of its high efficiency, power density, and reliability as compared with the conventional types of electrical machines. Generally, the analytical models and their field solutions are preferable to provide an accurate insight of the PMSM performances, instead of using the finite element models, because the former takes a considerably shorter computational time. PMSM design could have different properties of either slotted or slotless, or varieties of magnet placement on the rotor. By focusing on semi-closed surface-mounted PMSMs, the 2D analytical subdomain model in [1] demonstrates an accurate prediction of the magnetic fields that can facilitate the evaluation of the global quantities of PMSMs, such as cogging torque (Tcog), back-EMF, and total harmonic distortion (THDv). Previously, researchers investigated the influences of the machine performance by a single factor, e.g., the variation of Tcog during changes of magnet pole-arc (αP) [2, 3], or slot-opening [2, 3]. These investigations normally considered two types of magnetization patterns, i.e., parallel (PaM) and radial magnetization (RM). Therefore, the motivation of our work hinges on predicting the optimum value of αP in designing a surface-mounted PMSM under influence of four different magnetization patterns, using the analytical subdomain model.

In-situ synthesis of titanium carbides in iron alloys using plasma transferred arc welding

The synthesis of Fe-TiC metal matrix composite during metal deposition with laser and arc welding techniques is of technical and economic interest for hard surfacing of engineering components. Recent studies linked the resistance to abrasive wear with the size and morphology of TiC precipitates, which are strongly dependent on the deposition conditions and, more importantly, on the alloy chemistry. In this study, the effect of silicon and manganese on the TiC precipitates was explored and different processing conditions were assessed. The characterisation included optical and scanning electron microscopy, X-ray diffraction and microhardness testing. The results indicate that silicon and manganese can have a significant effect on TiC size and morphology. Therefore, the composition of the matrix alloy offers an effective pathway to modify the microstructure of in-situ precipitated Fe-TiC metal matrix composites. © 2013 Elsevier B.V.

In situ synthesis of TiC-Fe composite overlays from low cost TiO 2 precursors using plasma transferred Arc deposition

A direct conversion of TiO2 into TiC during plasma transferred arc deposition is a cheap and novel approach to produce wear resistant coatings. The present study explored the use of a low cost titanium ore as precursor for titanium carbide in metal matrix composite overlays. The deposited layers were characterized using optical microscopy, scanning electron microscopy, x-ray diffraction and microhardness testing. A carbothermic reduction of the titanium oxides took place during the deposition of the coating by plasma transferred arc. The overlays produced in this way consisted of fine titanium carbides evenly dispersed in an iron matrix. The opportunities and limitations of this approach are discussed.