Compressive behavior and energy absorption of constructed cellular aluminum

The defoThe deformation behaviors and energy absorption characteristics of constructed cellular aluminums were investigated by compressive tests. Constructed cellular aluminum specimens with two kinds of thickness in the cold-pressed panel and various numbers of layers bonded together have been tested. The plateau stress and the energy absorption have been measured and furthermore, the deformation behaviors have been evaluated. Results indicate that superior mechanical properties with constructed cellular aluminums can be achieved when the distribution of material at cell level is properly selected. Excellent energy absorption per unit mass can be obtained by only changing the thickness of the original aluminum sheet.nnation behaviors and energy absorption characteristics of constructed cellular aluminums were investigated by compressive tests. Constructed cellular aluminum specimens with two kinds of thickness in the cold-pressed panel and various numbers of layers bonded together have been tested. The plateau stress and the energy absorption have been measured and furthennore, the defonnation behaviors have been evaluated. Results indicate that superior mechanical properties with constructed cellular aluminums can be achieved when the distribution of material at cell level is properly selected. Excellent energy absorption per unit mass can be obtained by only changing the thickness of the original aluminum sheet.

Strain rate effects on the energy absorption of rapidly manufactured composite tubes

Quasi-static and intermediate rate axial crush tests were conducted on tubular specimens of Carbon/Epoxy (Toray T700/G83C) and Glass/Polypropylene (Twintex). The quasi-static tests were conducted at 10 mm/min (1.67 x 10¯⁴ m/s); five different crush initiators were used. Tests at intermediate rates were performed at speeds of 0.25, 0.5, 0.75, 1, 2, and 4m/s. Modes of failure and specific energy absorption (SEA) values were studied. The highest SEA measured was 86 kJ/kg. This value was observed using Carbon/Epoxy samples at quasi static rates with a 45° chamfer initiator. The highest energy absorption for Twintex tubes was observed to be 57.56 kJ/kg during 45° chamfer initiated tests at 0.25 m/s. Compared with steel and aluminium, SEA values of 15 and 30 kJ/kg, respectively, the benefits of using composite materials in crash structures become apparent.

The combined effect of light intensity and temperature on the chlorophyll and carotenoid pigments of phytoplankton

Chlorophyll a and other photosynthetic pigments are used as indicators of phytoplankton biomass, composition and physiological state. Extraction and HPLC procedures were developed to analyse for chlorophyll and carotenoid pigments. The effect of the environment on pigment production must be quantified before the pigments can be used to accurately estimate biomass or quantitatively describe phytoplankton composition.

The ranking of factors influencing the behaviour of light structures on expansive soils in Victoria, Australia

In this paper a Neural Network Model was used to develop a ranking of the potential damage influences for light structures on expansive soils in Victoria. These influences include geology, Thornthwaite moisture index, vegetation covers, construction foundation type, construction wall type, geographical region and age of building when first inspected. Approximately 400 cases of damage to light structures in Victoria, Australia were considered in this study. Feedforward Backpropagation was adopted to train the data. The ranking of importance was estimated using connection weight approach and then compared to results calculated from sensitivity analysis. From the analysis, the ranking of importance for potential damage factor was noted.

Measurement of light penetration through a simulated merino fleece

The degree of light penetration along the length of the fibre of a simulated Merino fleece was measured using a fibre optic probe to investigate the relationship between light exposure and photodamage to the wool fibre. The percentage of the total direct sunlight that reached the base of the 100-mm long, simulated, closed Merino fleece was ~1% and the section of the fibre from the root to 60 mm from the root was protected from exposure. The light intensity at the base of the fibre was increased to 2% when the density of the simulated fleece was halved. Wool was scoured and the yellowness and intensity of methylene blue staining was measured to estimate the extent of damage to wool staples.

Modeling of light propagation through biological tissues : a novel approach

An efficient numerical technique for modeling biological tissues using the radiative transfer equation is presented. Time dependence of the transient radiative transfer equation is approximated using Laguerre expansion. Azimuthal angle is discretized using the discrete ordinates method and the resulting set of ordinary differential equations is solved using the Runge-Kutta-Felhberg method.

Mechanisms of light producing chemical reactions

An array of experimental and computational methods has been implement to elucidate the mechanisms of light producing chemical reactions that are important in nature and the laboratory.

The influence of climate change on Thorthwaite moisture index on the design of light structures

Significant long term changes in the earth’s climate have occurred in the past but recently there has been more severe climate fluctuation than have occurred in the past few centuries. The effect of this climate change on the foundation conditions of roads and low-rise buildings is costing several hundred billion dollars world-wide. A method which tracks this climate change will be of great value for companies and governments. C.W. Thornthwaite (1948) defined the Thornthwaite Moisture Index (TMI) as the first base for his climate classification system and mapping in the United States. There are 3 important factors to predict ground movement: (a) the degree of moisture index change (b) the depth at which this change occurs and (c) the foundation soil type. The water budget model was used by Thornthwaite (1948) to calculate the moisture index. This paper also discusses two typical examples of the use of this model. Originally TMI’s were mainly used to map soil moisture conditions for agriculture but soon became a method to predict environmental and pavement foundation changes.

Impact response and energy absorption of aluminium foam-filled tubes

The effect of foam fillers on the impact behaviour and energy absorption of an aluminium tube is investigated. Both experimental test and computational simulation are employed in current study. For comparison, hollow tubes and foams are also tested, respectively. Foam filler is found to be ineffective in increasing the crushing loads of the composite tubes over the simple superposition of the crushing loads of hollow tube and foam. Also, foam filler increases the tendency for the concertina mode of folding. The foam fillers of tubes additionally result in increasing the SAE values over those of hollow tubes.